## Automatically generated incremental diff
## From:   linux-2.6.14-rc5
## To:     linux-2.6.14
## Robot:  $Id: make-incremental-diff,v 1.12 2004/01/06 07:19:36 hpa Exp $

diff -urN linux-2.6.14-rc5/Documentation/kernel-parameters.txt linux-2.6.14/Documentation/kernel-parameters.txt
--- linux-2.6.14-rc5/Documentation/kernel-parameters.txt	2005-10-27 18:17:15.687342809 -0700
+++ linux-2.6.14/Documentation/kernel-parameters.txt	2005-10-27 18:17:22.708659120 -0700
@@ -17,7 +17,7 @@
 
 	usbcore.blinkenlights=1
 
-The text in square brackets at the beginning of the description state the
+The text in square brackets at the beginning of the description states the
 restrictions on the kernel for the said kernel parameter to be valid. The
 restrictions referred to are that the relevant option is valid if:
 
@@ -27,8 +27,8 @@
 	APM	Advanced Power Management support is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	CD	Appropriate CD support is enabled.
-	DEVFS	devfs support is enabled. 
-	DRM	Direct Rendering Management support is enabled. 
+	DEVFS	devfs support is enabled.
+	DRM	Direct Rendering Management support is enabled.
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
@@ -71,7 +71,7 @@
 	SERIAL	Serial support is enabled.
 	SMP	The kernel is an SMP kernel.
 	SPARC	Sparc architecture is enabled.
-	SWSUSP	Software suspension is enabled.
+	SWSUSP	Software suspend is enabled.
 	TS	Appropriate touchscreen support is enabled.
 	USB	USB support is enabled.
 	USBHID	USB Human Interface Device support is enabled.
@@ -105,13 +105,13 @@
 			See header of drivers/scsi/53c7xx.c.
 			See also Documentation/scsi/ncr53c7xx.txt.
 
-	acpi=		[HW,ACPI] Advanced Configuration and Power Interface 
-			Format: { force | off | ht | strict }
+	acpi=		[HW,ACPI] Advanced Configuration and Power Interface
+			Format: { force | off | ht | strict | noirq }
 			force -- enable ACPI if default was off
 			off -- disable ACPI if default was on
 			noirq -- do not use ACPI for IRQ routing
 			ht -- run only enough ACPI to enable Hyper Threading
-			strict --  Be less tolerant of platforms that are not
+			strict -- Be less tolerant of platforms that are not
 				strictly ACPI specification compliant.
 
 			See also Documentation/pm.txt, pci=noacpi
@@ -119,20 +119,23 @@
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode }
 			See Documentation/power/video.txt
- 
-	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
-			Format: { level | edge |  high | low }
 
-	acpi_irq_balance	[HW,ACPI] ACPI will balance active IRQs
-				default in APIC mode
+	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
+			Format: { level | edge | high | low }
 
-	acpi_irq_nobalance	[HW,ACPI] ACPI will not move active IRQs (default)
-				default in PIC mode
+	acpi_irq_balance [HW,ACPI]
+			ACPI will balance active IRQs
+			default in APIC mode
+
+	acpi_irq_nobalance [HW,ACPI]
+			ACPI will not move active IRQs (default)
+			default in PIC mode
 
-	acpi_irq_pci=	[HW,ACPI] If irq_balance, Clear listed IRQs for use by PCI
+	acpi_irq_pci=	[HW,ACPI] If irq_balance, clear listed IRQs for
+			use by PCI
 			Format: <irq>,<irq>...
 
-	acpi_irq_isa=	[HW,ACPI] If irq_balance, Mark listed IRQs used by ISA
+	acpi_irq_isa=	[HW,ACPI] If irq_balance, mark listed IRQs used by ISA
 			Format: <irq>,<irq>...
 
 	acpi_osi=	[HW,ACPI] empty param disables _OSI
@@ -145,14 +148,14 @@
 
 	acpi_dbg_layer=	[HW,ACPI]
 			Format: <int>
-			Each bit of the <int> indicates an acpi debug layer,
+			Each bit of the <int> indicates an ACPI debug layer,
 			1: enable, 0: disable. It is useful for boot time
 			debugging. After system has booted up, it can be set
 			via /proc/acpi/debug_layer.
 
 	acpi_dbg_level=	[HW,ACPI]
 			Format: <int>
-			Each bit of the <int> indicates an acpi debug level,
+			Each bit of the <int> indicates an ACPI debug level,
 			1: enable, 0: disable. It is useful for boot time
 			debugging. After system has booted up, it can be set
 			via /proc/acpi/debug_level.
@@ -161,12 +164,13 @@
 
 	acpi_generic_hotkey [HW,ACPI]
 			Allow consolidated generic hotkey driver to
-			over-ride platform specific driver.
+			override platform specific driver.
 			See also Documentation/acpi-hotkey.txt.
 
 	enable_timer_pin_1 [i386,x86-64]
 			Enable PIN 1 of APIC timer
-			Can be useful to work around chipset bugs (in particular on some ATI chipsets)
+			Can be useful to work around chipset bugs
+			(in particular on some ATI chipsets).
 			The kernel tries to set a reasonable default.
 
 	disable_timer_pin_1 [i386,x86-64]
@@ -182,7 +186,7 @@
 
 	adlib=		[HW,OSS]
 			Format: <io>
- 
+
 	advansys=	[HW,SCSI]
 			See header of drivers/scsi/advansys.c.
 
@@ -192,7 +196,7 @@
 	aedsp16=	[HW,OSS] Audio Excel DSP 16
 			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
 			See also header of sound/oss/aedsp16.c.
- 
+
 	aha152x=	[HW,SCSI]
 			See Documentation/scsi/aha152x.txt.
 
@@ -205,10 +209,6 @@
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
-	AM53C974=	[HW,SCSI]
-			Format: <host-scsi-id>,<target-scsi-id>,<max-rate>,<max-offset>
-			See also header of drivers/scsi/AM53C974.c.
-
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -219,23 +219,24 @@
 			connected to one of 16 gameports
 			Format: <type1>,<type2>,..<type16>
 
-	apc=		[HW,SPARC] Power management functions (SPARCstation-4/5 + deriv.)
+	apc=		[HW,SPARC]
+			Power management functions (SPARCstation-4/5 + deriv.)
 			Format: noidle
 			Disable APC CPU standby support. SPARCstation-Fox does
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,i386] Change the output verbosity  whilst booting
+	apic=		[APIC,i386] Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
- 
+
 	apm=		[APM] Advanced Power Management
 			See header of arch/i386/kernel/apm.c.
 
 	applicom=	[HW]
 			Format: <mem>,<irq>
- 
+
 	arcrimi=	[HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
 			Format: <io>,<irq>,<nodeID>
 
@@ -250,38 +251,40 @@
 
 	atkbd.reset=	[HW] Reset keyboard during initialization
 
-	atkbd.set=	[HW] Select keyboard code set 
-			Format: <int> (2 = AT (default) 3 = PS/2)
+	atkbd.set=	[HW] Select keyboard code set
+			Format: <int> (2 = AT (default), 3 = PS/2)
 
 	atkbd.scroll=	[HW] Enable scroll wheel on MS Office and similar
 			keyboards
 
 	atkbd.softraw=	[HW] Choose between synthetic and real raw mode
 			Format: <bool> (0 = real, 1 = synthetic (default))
-	
-	atkbd.softrepeat=
-			[HW] Use software keyboard repeat
+
+	atkbd.softrepeat= [HW]
+			Use software keyboard repeat
 
 	autotest	[IA64]
 
 	awe=		[HW,OSS] AWE32/SB32/AWE64 wave table synth
 			Format: <io>,<memsize>,<isapnp>
- 
+
 	aztcd=		[HW,CD] Aztech CD268 CDROM driver
 			Format: <io>,0x79 (?)
 
 	baycom_epp=	[HW,AX25]
 			Format: <io>,<mode>
- 
+
 	baycom_par=	[HW,AX25] BayCom Parallel Port AX.25 Modem
 			Format: <io>,<mode>
 			See header of drivers/net/hamradio/baycom_par.c.
 
-	baycom_ser_fdx=	[HW,AX25] BayCom Serial Port AX.25 Modem (Full Duplex Mode)
+	baycom_ser_fdx=	[HW,AX25]
+			BayCom Serial Port AX.25 Modem (Full Duplex Mode)
 			Format: <io>,<irq>,<mode>[,<baud>]
 			See header of drivers/net/hamradio/baycom_ser_fdx.c.
 
-	baycom_ser_hdx=	[HW,AX25] BayCom Serial Port AX.25 Modem (Half Duplex Mode)
+	baycom_ser_hdx=	[HW,AX25]
+			BayCom Serial Port AX.25 Modem (Half Duplex Mode)
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
@@ -292,7 +295,8 @@
 	blkmtd_count=
 
 	bttv.card=	[HW,V4L] bttv (bt848 + bt878 based grabber cards)
-	bttv.radio=	Most important insmod options are available as kernel args too.
+	bttv.radio=	Most important insmod options are available as
+			kernel args too.
 	bttv.pll=	See Documentation/video4linux/bttv/Insmod-options
 	bttv.tuner=	and Documentation/video4linux/bttv/CARDLIST
 
@@ -318,15 +322,17 @@
 	checkreqprot	[SELINUX] Set initial checkreqprot flag value.
 			Format: { "0" | "1" }
 			See security/selinux/Kconfig help text.
-			0 -- check protection applied by kernel (includes any implied execute protection).
+			0 -- check protection applied by kernel (includes
+				any implied execute protection).
 			1 -- check protection requested by application.
 			Default value is set via a kernel config option.
-			Value can be changed at runtime via /selinux/checkreqprot.
- 
- 	clock=		[BUGS=IA-32, HW] gettimeofday timesource override. 
+			Value can be changed at runtime via
+				/selinux/checkreqprot.
+
+ 	clock=		[BUGS=IA-32,HW] gettimeofday timesource override.
 			Forces specified timesource (if avaliable) to be used
-			when calculating gettimeofday(). If specicified timesource
-			is not avalible, it defaults to PIT. 
+			when calculating gettimeofday(). If specicified
+			timesource is not avalible, it defaults to PIT.
 			Format: { pit | tsc | cyclone | pmtmr }
 
 	hpet=		[IA-32,HPET] option to disable HPET and use PIT.
@@ -336,17 +342,19 @@
 			Format: { auto | [<io>,][<irq>] }
 
 	com20020=	[HW,NET] ARCnet - COM20020 chipset
-			Format: <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
+			Format:
+			<io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
 
 	com90io=	[HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers)
 			Format: <io>[,<irq>]
 
-	com90xx=	[HW,NET] ARCnet - COM90xx chipset (memory-mapped buffers)
+	com90xx=	[HW,NET]
+			ARCnet - COM90xx chipset (memory-mapped buffers)
 			Format: <io>[,<irq>[,<memstart>]]
 
 	condev=		[HW,S390] console device
 	conmode=
- 
+
 	console=	[KNL] Output console device and options.
 
 		tty<n>	Use the virtual console device <n>.
@@ -367,7 +375,8 @@
 			options are the same as for ttyS, above.
 
 	cpcihp_generic=	[HW,PCI] Generic port I/O CompactPCI driver
-			Format: <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
+			Format:
+			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
 	cpia_pp=	[HW,PPT]
 			Format: { parport<nr> | auto | none }
@@ -384,10 +393,10 @@
 
 	cs89x0_media=	[HW,NET]
 			Format: { rj45 | aui | bnc }
- 
+
 	cyclades=	[HW,SERIAL] Cyclades multi-serial port adapter.
- 
-	dasd=		[HW,NET]    
+
+	dasd=		[HW,NET]
 			See header of drivers/s390/block/dasd_devmap.c.
 
 	db9.dev[2|3]=	[HW,JOY] Multisystem joystick support via parallel port
@@ -406,7 +415,7 @@
 
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
- 
+
 	digi=		[HW,SERIAL]
 			IO parameters + enable/disable command.
 
@@ -424,11 +433,11 @@
 
 	dtc3181e=	[HW,SCSI]
 
-	earlyprintk=	[IA-32, X86-64]
+	earlyprintk=	[IA-32,X86-64]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
 
-			Append ,keep to not disable it when the real console
+			Append ",keep" to not disable it when the real console
 			takes over.
 
 			Only vga or serial at a time, not both.
@@ -451,7 +460,7 @@
 			Format: {"of[f]" | "sk[ipmbr]"}
 			See comment in arch/i386/boot/edd.S
 
-	eicon=		[HW,ISDN] 
+	eicon=		[HW,ISDN]
 			Format: <id>,<membase>,<irq>
 
 	eisa_irq_edge=	[PARISC,HW]
@@ -462,12 +471,13 @@
 			arch/i386/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
-			Format: {"as"|"cfq"|"deadline"|"noop"}
-			See Documentation/block/as-iosched.txt
-			and Documentation/block/deadline-iosched.txt for details.
+			Format: {"as" | "cfq" | "deadline" | "noop"}
+			See Documentation/block/as-iosched.txt and
+			Documentation/block/deadline-iosched.txt for details.
+
 	elfcorehdr=	[IA-32]
-			Specifies physical address of start of kernel core image
-			elf header.
+			Specifies physical address of start of kernel core
+			image elf header.
 			See Documentation/kdump.txt for details.
 
 	enforcing	[SELINUX] Set initial enforcing status.
@@ -485,7 +495,7 @@
 	es1371=		[HW,OSS]
 			Format: <spdif>,[<nomix>,[<amplifier>]]
 			See also header of sound/oss/es1371.c.
- 
+
 	ether=		[HW,NET] Ethernet cards parameters
 			This option is obsoleted by the "netdev=" option, which
 			has equivalent usage. See its documentation for details.
@@ -526,12 +536,13 @@
 
 	gus=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma16>
- 
+
 	gvp11=		[HW,SCSI]
 
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
 			are distributed across NUMA nodes.  Defaults on
 			for IA-64, off otherwise.
+			Format: 0 | 1 (for off | on)
 
 	hcl=		[IA-64] SGI's Hardware Graph compatibility layer
 
@@ -595,13 +606,13 @@
 	ide?=		[HW] (E)IDE subsystem
 			Format: ide?=noprobe or chipset specific parameters.
 			See Documentation/ide.txt.
-	
+
 	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
 			See Documentation/ide.txt.
 
 	idle=		[HW]
 			Format: idle=poll or idle=halt
- 
+
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
@@ -649,7 +660,7 @@
 			firmware running.
 
 	isapnp=		[ISAPNP]
-			Format: <RDP>, <reset>, <pci_scan>, <verbosity>
+			Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
 	isolcpus=	[KNL,SMP] Isolate CPUs from the general scheduler.
 			Format: <cpu number>,...,<cpu number>
@@ -661,32 +672,33 @@
 			"number of CPUs in system - 1".
 
 			This option is the preferred way to isolate CPUs. The
-			alternative - manually setting the CPU mask of all tasks
-			in the system can cause problems and suboptimal load
-			balancer performance.
+			alternative -- manually setting the CPU mask of all
+			tasks in the system -- can cause problems and
+			suboptimal load balancer performance.
 
 	isp16=		[HW,CD]
 			Format: <io>,<irq>,<dma>,<setup>
 
-	iucv=		[HW,NET] 
+	iucv=		[HW,NET]
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joystick.txt.
 
 	keepinitrd	[HW,ARM]
 
-	kstack=N	[IA-32, X86-64] Print N words from the kernel stack
+	kstack=N	[IA-32,X86-64] Print N words from the kernel stack
 			in oops dumps.
 
 	l2cr=		[PPC]
 
-	lapic		[IA-32,APIC] Enable the local APIC even if BIOS disabled it.
+	lapic		[IA-32,APIC] Enable the local APIC even if BIOS
+			disabled it.
 
 	lasi=		[HW,SCSI] PARISC LASI driver for the 53c700 chip
 			Format: addr:<io>,irq:<irq>
 
-	llsc*=		[IA64]
-			See function print_params() in arch/ia64/sn/kernel/llsc4.c.
+	llsc*=		[IA64] See function print_params() in
+			arch/ia64/sn/kernel/llsc4.c.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
 			See Documentation/ramdisk.txt.
@@ -713,8 +725,9 @@
 			7 (KERN_DEBUG)		debug-level messages
 
 	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format is n, nk, nM.  n must be a power of two.  The
-			default is set in kernel config.
+			Format: { n | nk | nM }
+			n must be a power of two.  The default size
+			is set in the kernel config file.
 
 	lp=0		[LP]	Specify parallel ports to use, e.g,
 	lp=port[,port...]	lp=none,parport0 (lp0 not configured, lp1 uses
@@ -750,23 +763,23 @@
 	ltpc=		[NET]
 			Format: <io>,<irq>,<dma>
 
-	mac5380=	[HW,SCSI]
-			Format: <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+	mac5380=	[HW,SCSI] Format:
+			<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 
-	mac53c9x=	[HW,SCSI]
-			Format: <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+	mac53c9x=	[HW,SCSI] Format:
+			<num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 
-	machvec=	[IA64]
-			Force the use of a particular machine-vector (machvec) in a generic
-			kernel.  Example: machvec=hpzx1_swiotlb
+	machvec=	[IA64] Force the use of a particular machine-vector
+			(machvec) in a generic kernel.
+			Example: machvec=hpzx1_swiotlb
 
-	mad16=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick>
+	mad16=		[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick>
 
 	maui=		[HW,OSS]
 			Format: <io>,<irq>
- 
-	max_loop=       [LOOP] Maximum number of loopback devices that can
+
+	max_loop=	[LOOP] Maximum number of loopback devices that can
 			be mounted
 			Format: <1-256>
 
@@ -776,11 +789,11 @@
 	max_addr=[KMG]	[KNL,BOOT,ia64] All physical memory greater than or
 			equal to this physical address is ignored.
 
-	max_luns=	[SCSI] Maximum number of LUNs to probe
+	max_luns=	[SCSI] Maximum number of LUNs to probe.
 			Should be between 1 and 2^32-1.
 
 	max_report_luns=
-			[SCSI] Maximum number of LUNs received
+			[SCSI] Maximum number of LUNs received.
 			Should be between 1 and 16384.
 
 	mca-pentium	[BUGS=IA-32]
@@ -796,11 +809,11 @@
 
 	md=		[HW] RAID subsystems devices and level
 			See Documentation/md.txt.
- 
+
 	mdacon=		[MDA]
 			Format: <first>,<last>
 			Specifies range of consoles to be captured by the MDA.
- 
+
 	mem=nn[KMG]	[KNL,BOOT] Force usage of a specific amount of memory
 			Amount of memory to be used when the kernel is not able
 			to see the whole system memory or for test.
@@ -851,15 +864,15 @@
 	MTD_Partition=	[MTD]
 			Format: <name>,<region-number>,<size>,<offset>
 
-	MTD_Region=	[MTD]
-			Format: <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
+	MTD_Region=	[MTD] Format:
+			<name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
 
 	mtdparts=	[MTD]
 			See drivers/mtd/cmdline.c.
 
 	mtouchusb.raw_coordinates=
-			[HW] Make the MicroTouch USB driver use raw coordinates ('y', default)
-			or cooked coordinates ('n')
+			[HW] Make the MicroTouch USB driver use raw coordinates
+			('y', default) or cooked coordinates ('n')
 
 	n2=		[NET] SDL Inc. RISCom/N2 synchronous serial card
 
@@ -880,7 +893,9 @@
 			Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
 			Note that mem_start is often overloaded to mean
 			something different and driver-specific.
- 
+			This usage is only documented in each driver source
+			file if at all.
+
 	nfsaddrs=	[NFS]
 			See Documentation/nfsroot.txt.
 
@@ -893,8 +908,8 @@
 			emulation library even if a 387 maths coprocessor
 			is present.
 
-	noalign		[KNL,ARM] 
- 
+	noalign		[KNL,ARM]
+
 	noapic		[SMP,APIC] Tells the kernel to not make use of any
 			IOAPICs that may be present in the system.
 
@@ -905,19 +920,19 @@
 			on "Classic" PPC cores.
 
 	nocache		[ARM]
- 
+
 	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
 
 	noexec		[IA-64]
 
-	noexec		[IA-32, X86-64]
+	noexec		[IA-32,X86-64]
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable nn-executable mappings
 
 	nofxsr		[BUGS=IA-32]
 
 	nohlt		[BUGS=ARM]
- 
+
 	no-hlt		[BUGS=IA-32] Tells the kernel that the hlt
 			instruction doesn't work correctly and not to
 			use it.
@@ -948,8 +963,9 @@
 
 	noresidual	[PPC] Don't use residual data on PReP machines.
 
-	noresume	[SWSUSP] Disables resume and restore original swap space.
- 
+	noresume	[SWSUSP] Disables resume and restores original swap
+			space.
+
 	no-scroll	[VGA] Disables scrollback.
 			This is required for the Braillex ib80-piezo Braille
 			reader made by F.H. Papenmeier (Germany).
@@ -965,16 +981,16 @@
 	nousb		[USB] Disable the USB subsystem
 
 	nowb		[ARM]
- 
+
 	opl3=		[HW,OSS]
 			Format: <io>
 
 	opl3sa=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<mpu_io>,<mpu_irq>
 
-	opl3sa2=	[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
- 
+	opl3sa2=	[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
+
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
@@ -993,36 +1009,33 @@
 			Format: <parport#>
 	parkbd.mode=	[HW] Parallel port keyboard adapter mode of operation,
 			0 for XT, 1 for AT (default is AT).
-			Format: <mode> 
+			Format: <mode>
 
-	parport=0	[HW,PPT]	Specify parallel ports. 0 disables.
-	parport=auto			Use 'auto' to force the driver to use
-	parport=0xBBB[,IRQ[,DMA]]	any IRQ/DMA settings detected (the
-					default is to ignore detected IRQ/DMA
-					settings because of possible
-					conflicts). You can specify the base
-					address, IRQ, and DMA settings; IRQ and
-					DMA should be numbers, or 'auto' (for
-					using detected settings on that
-					particular port), or 'nofifo' (to avoid
-					using a FIFO even if it is detected).
-					Parallel ports are assigned in the
-					order they are specified on the command
-					line, starting with parport0.
-
-	parport_init_mode=
-			[HW,PPT]	Configure VIA parallel port to
-					operate in specific mode. This is
-					necessary on Pegasos computer where
-					firmware has no options for setting up
-					parallel port mode and sets it to
-					spp. Currently this function knows
-					686a and 8231 chips.
+	parport=	[HW,PPT] Specify parallel ports. 0 disables.
+			Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] }
+			Use 'auto' to force the driver to use any
+			IRQ/DMA settings detected (the default is to
+			ignore detected IRQ/DMA settings because of
+			possible conflicts). You can specify the base
+			address, IRQ, and DMA settings; IRQ and DMA
+			should be numbers, or 'auto' (for using detected
+			settings on that particular port), or 'nofifo'
+			(to avoid using a FIFO even if it is detected).
+			Parallel ports are assigned in the order they
+			are specified on the command line, starting
+			with parport0.
+
+	parport_init_mode=	[HW,PPT]
+			Configure VIA parallel port to operate in
+			a specific mode. This is necessary on Pegasos
+			computer where firmware has no options for setting
+			up parallel port mode and sets it to spp.
+			Currently this function knows 686a and 8231 chips.
 			Format: [spp|ps2|epp|ecp|ecpepp]
 
-	pas2=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
- 
+	pas2=		[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
+
 	pas16=		[HW,SCSI]
 			See header of drivers/scsi/pas16.c.
 
@@ -1032,64 +1045,67 @@
 			See header of drivers/block/paride/pcd.c.
 			See also Documentation/paride.txt.
 
-	pci=option[,option...]		[PCI] various PCI subsystem options:
-		off			[IA-32] don't probe for the PCI bus
-		bios			[IA-32] force use of PCI BIOS, don't access
-					the hardware directly. Use this if your machine
-					has a non-standard PCI host bridge.
-		nobios			[IA-32] disallow use of PCI BIOS, only direct
-					hardware access methods are allowed. Use this
-					if you experience crashes upon bootup and you
-					suspect they are caused by the BIOS.
-		conf1			[IA-32] Force use of PCI Configuration Mechanism 1.
-		conf2			[IA-32] Force use of PCI Configuration Mechanism 2.
-		nosort			[IA-32] Don't sort PCI devices according to
-					order given by the PCI BIOS. This sorting is done
-					to get a device order compatible with older kernels.
-		biosirq			[IA-32] Use PCI BIOS calls to get the interrupt
-					routing table. These calls are known to be buggy
-					on several machines and they hang the machine when used,
-					but on other computers it's the only way to get the
-					interrupt routing table. Try this option if the kernel
-					is unable to allocate IRQs or discover secondary PCI
-					buses on your motherboard.
-		rom			[IA-32] Assign address space to expansion ROMs.
-					Use with caution as certain devices share address
-					decoders between ROMs and other resources.
-		irqmask=0xMMMM		[IA-32] Set a bit mask of IRQs allowed to be assigned
-					automatically to PCI devices. You can make the kernel
-					exclude IRQs of your ISA cards this way.
+	pci=option[,option...]	[PCI] various PCI subsystem options:
+		off		[IA-32] don't probe for the PCI bus
+		bios		[IA-32] force use of PCI BIOS, don't access
+				the hardware directly. Use this if your machine
+				has a non-standard PCI host bridge.
+		nobios		[IA-32] disallow use of PCI BIOS, only direct
+				hardware access methods are allowed. Use this
+				if you experience crashes upon bootup and you
+				suspect they are caused by the BIOS.
+		conf1		[IA-32] Force use of PCI Configuration
+				Mechanism 1.
+		conf2		[IA-32] Force use of PCI Configuration
+				Mechanism 2.
+		nosort		[IA-32] Don't sort PCI devices according to
+				order given by the PCI BIOS. This sorting is
+				done to get a device order compatible with
+				older kernels.
+		biosirq		[IA-32] Use PCI BIOS calls to get the interrupt
+				routing table. These calls are known to be buggy
+				on several machines and they hang the machine
+				when used, but on other computers it's the only
+				way to get the interrupt routing table. Try
+				this option if the kernel is unable to allocate
+				IRQs or discover secondary PCI buses on your
+				motherboard.
+		rom		[IA-32] Assign address space to expansion ROMs.
+				Use with caution as certain devices share
+				address decoders between ROMs and other
+				resources.
+		irqmask=0xMMMM	[IA-32] Set a bit mask of IRQs allowed to be
+				assigned automatically to PCI devices. You can
+				make the kernel exclude IRQs of your ISA cards
+				this way.
 		pirqaddr=0xAAAAA	[IA-32] Specify the physical address
-					of the PIRQ table (normally generated
-					by the BIOS) if it is outside the
-					F0000h-100000h range.
-		lastbus=N		[IA-32] Scan all buses till bus #N. Can be useful
-					if the kernel is unable to find your secondary buses
-					and you want to tell it explicitly which ones they are.
-		assign-busses		[IA-32] Always assign all PCI bus
-					numbers ourselves, overriding
-					whatever the firmware may have
-					done.
-		usepirqmask		[IA-32] Honor the possible IRQ mask
-					stored in the BIOS $PIR table. This is
-					needed on some systems with broken
-					BIOSes, notably some HP Pavilion N5400
-					and Omnibook XE3 notebooks. This will
-					have no effect if ACPI IRQ routing is
-					enabled.
-		noacpi			[IA-32] Do not use ACPI for IRQ routing
-					or for PCI scanning.
-		routeirq		Do IRQ routing for all PCI devices.
-					This is normally done in pci_enable_device(),
-					so this option is a temporary workaround
-					for broken drivers that don't call it.
-
-		firmware		[ARM] Do not re-enumerate the bus but
-					instead just use the configuration
-					from the bootloader. This is currently
-					used on IXP2000 systems where the
-					bus has to be configured a certain way
-					for adjunct CPUs.
+				of the PIRQ table (normally generated
+				by the BIOS) if it is outside the
+				F0000h-100000h range.
+		lastbus=N	[IA-32] Scan all buses thru bus #N. Can be
+				useful if the kernel is unable to find your
+				secondary buses and you want to tell it
+				explicitly which ones they are.
+		assign-busses	[IA-32] Always assign all PCI bus
+				numbers ourselves, overriding
+				whatever the firmware may have done.
+		usepirqmask	[IA-32] Honor the possible IRQ mask stored
+				in the BIOS $PIR table. This is needed on
+				some systems with broken BIOSes, notably
+				some HP Pavilion N5400 and Omnibook XE3
+				notebooks. This will have no effect if ACPI
+				IRQ routing is enabled.
+		noacpi		[IA-32] Do not use ACPI for IRQ routing
+				or for PCI scanning.
+		routeirq	Do IRQ routing for all PCI devices.
+				This is normally done in pci_enable_device(),
+				so this option is a temporary workaround
+				for broken drivers that don't call it.
+		firmware	[ARM] Do not re-enumerate the bus but instead
+				just use the configuration from the
+				bootloader. This is currently used on
+				IXP2000 systems where the bus has to be
+				configured a certain way for adjunct CPUs.
 
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
@@ -1127,19 +1143,20 @@
 			[ISAPNP] Exclude DMAs for the autoconfiguration
 
 	pnp_reserve_io=	[ISAPNP] Exclude I/O ports for the autoconfiguration
-		     	Ranges are in pairs (I/O port base and size).
+			Ranges are in pairs (I/O port base and size).
 
 	pnp_reserve_mem=
-			[ISAPNP] Exclude memory regions for the autoconfiguration
+			[ISAPNP] Exclude memory regions for the
+			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
 	profile=	[KNL] Enable kernel profiling via /proc/profile
-			{ schedule | <number> }
-			(param: schedule - profile schedule points}
-			(param: profile step/bucket size as a power of 2 for
-				statistical time based profiling)
+			Format: [schedule,]<number>
+			Param: "schedule" - profile schedule points.
+			Param: <number> - step/bucket size as a power of 2 for
+				statistical time based profiling.
 
-	processor.max_cstate=   [HW, ACPI]
+	processor.max_cstate=	[HW,ACPI]
 			Limit processor to maximum C-state
 			max_cstate=9 overrides any DMI blacklist limit.
 
@@ -1147,27 +1164,28 @@
 			before loading.
 			See Documentation/ramdisk.txt.
 
-	psmouse.proto=  [HW,MOUSE] Highest PS2 mouse protocol extension to
-			probe for (bare|imps|exps|lifebook|any).
+	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
+			probe for; one of (bare|imps|exps|lifebook|any).
 	psmouse.rate=	[HW,MOUSE] Set desired mouse report rate, in reports
 			per second.
-	psmouse.resetafter=
-			[HW,MOUSE] Try to reset the device after so many bad packets
+	psmouse.resetafter=	[HW,MOUSE]
+			Try to reset the device after so many bad packets
 			(0 = never).
 	psmouse.resolution=
 			[HW,MOUSE] Set desired mouse resolution, in dpi.
 	psmouse.smartscroll=
-			[HW,MOUSE] Controls Logitech smartscroll autorepeat,
+			[HW,MOUSE] Controls Logitech smartscroll autorepeat.
 			0 = disabled, 1 = enabled (default).
 
 	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
-			Format: <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
+			Format:
+			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
 
 	pt.		[PARIDE]
 			See Documentation/paride.txt.
 
 	quiet=		[KNL] Disable log messages
- 
+
 	r128=		[HW,DRM]
 
 	raid=		[HW,RAID]
@@ -1176,10 +1194,9 @@
 	ramdisk=	[RAM] Sizes of RAM disks in kilobytes [deprecated]
 			See Documentation/ramdisk.txt.
 
-	ramdisk_blocksize=
-			[RAM]
+	ramdisk_blocksize=	[RAM]
 			See Documentation/ramdisk.txt.
- 
+
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			New name for the ramdisk parameter.
 			See Documentation/ramdisk.txt.
@@ -1195,7 +1212,8 @@
 
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
-	resume=		[SWSUSP] Specify the partition device for software suspension
+	resume=		[SWSUSP]
+			Specify the partition device for software suspend
 
 	rhash_entries=	[KNL,NET]
 			Set number of hash buckets for route cache
@@ -1225,7 +1243,7 @@
 			Format: <io>,<irq>,<dma>,<dma2>
 
 	sbni=		[NET] Granch SBNI12 leased line adapter
- 
+
 	sbpcd=		[HW,CD] Soundblaster CD adapter
 			Format: <io>,<type>
 			See a comment before function sbpcd_setup() in
@@ -1258,21 +1276,20 @@
 
 	serialnumber	[BUGS=IA-32]
 
-	sg_def_reserved_size=
-			[SCSI]
- 
+	sg_def_reserved_size=	[SCSI]
+
 	sgalaxy=	[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<sgbase>
 
 	shapers=	[NET]
 			Maximal number of shapers.
- 
+
 	sim710=		[SCSI,HW]
 			See header of drivers/scsi/sim710.c.
 
 	simeth=		[IA-64]
 	simscsi=
- 
+
 	sjcd=		[HW,CD]
 			Format: <io>,<irq>,<dma>
 			See header of drivers/cdrom/sjcd.c.
@@ -1403,10 +1420,10 @@
 	snd-wavefront=	[HW,ALSA]
 
 	snd-ymfpci=	[HW,ALSA]
- 
+
 	sonicvibes=	[HW,OSS]
 			Format: <reverb>
- 
+
 	sonycd535=	[HW,CD]
 			Format: <io>[,<irq>]
 
@@ -1423,7 +1440,7 @@
 
 	sscape=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
- 
+
 	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
 			See Documentation/scsi/st.txt.
 
@@ -1446,7 +1463,7 @@
 	stram_swap=	[HW,M68k]
 
 	swiotlb=	[IA-64] Number of I/O TLB slabs
- 
+
 	switches=	[HW,M68k]
 
 	sym53c416=	[HW,SCSI]
@@ -1479,14 +1496,16 @@
 	tp720=		[HW,PS2]
 
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
-			Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
- 
+			Format:
+			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
+
 	tsdev.xres=	[TS] Horizontal screen resolution.
 	tsdev.yres=	[TS] Vertical screen resolution.
 
-	turbografx.map[2|3]=
-			[HW,JOY] TurboGraFX parallel port interface
-			Format: <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
+	turbografx.map[2|3]=	[HW,JOY]
+			TurboGraFX parallel port interface
+			Format:
+			<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
 			See also Documentation/input/joystick-parport.txt
 
 	u14-34f=	[HW,SCSI] UltraStor 14F/34F SCSI host adapter
@@ -1502,17 +1521,18 @@
 
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
- 
+
 	video=		[FB] Frame buffer configuration
 			See Documentation/fb/modedb.txt.
 
 	vga=		[BOOT,IA-32] Select a particular video mode
-			See Documentation/i386/boot.txt and Documentation/svga.txt.
+			See Documentation/i386/boot.txt and
+			Documentation/svga.txt.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is
 			passed to the kernel using a special protocol.
 
-	vmalloc=nn[KMG]	[KNL,BOOT] forces the vmalloc area to have an exact
+	vmalloc=nn[KMG]	[KNL,BOOT] Forces the vmalloc area to have an exact
 			size of <nn>. This can be used to increase the
 			minimum size (128MB on x86). It can also be used to
 			decrease the size and leave more room for directly
@@ -1520,11 +1540,11 @@
 
 	vmhalt=		[KNL,S390]
 
-	vmpoff=		[KNL,S390] 
- 
+	vmpoff=		[KNL,S390]
+
 	waveartist=	[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
- 
+
 	wd33c93=	[HW,SCSI]
 			See header of drivers/scsi/wd33c93.c.
 
@@ -1538,21 +1558,25 @@
 	xd_geo=		See header of drivers/block/xd.c.
 
 	xirc2ps_cs=	[NET,PCMCIA]
-			Format: <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
-
+			Format:
+			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
 
 
+______________________________________________________________________
 Changelog:
 
+2000-06-??	Mr. Unknown
 	The last known update (for 2.4.0) - the changelog was not kept before.
-	2000-06-??	Mr. Unknown
 
+2002-11-24	Petr Baudis <pasky@ucw.cz>
+		Randy Dunlap <randy.dunlap@verizon.net>
 	Update for 2.5.49, description for most of the options introduced,
 	references to other documentation (C files, READMEs, ..), added S390,
 	PPC, SPARC, MTD, ALSA and OSS category. Minor corrections and
 	reformatting.
-	2002-11-24	Petr Baudis <pasky@ucw.cz>
-			Randy Dunlap <randy.dunlap@verizon.net>
+
+2005-10-19	Randy Dunlap <rdunlap@xenotime.net>
+	Lots of typos, whitespace, some reformatting.
 
 TODO:
 
diff -urN linux-2.6.14-rc5/Makefile linux-2.6.14/Makefile
--- linux-2.6.14-rc5/Makefile	2005-10-27 18:17:15.716344115 -0700
+++ linux-2.6.14/Makefile	2005-10-27 18:17:22.738660471 -0700
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 14
-EXTRAVERSION =-rc5
+EXTRAVERSION =
 NAME=Affluent Albatross
 
 # *DOCUMENTATION*
diff -urN linux-2.6.14-rc5/arch/arm/mach-integrator/impd1.c linux-2.6.14/arch/arm/mach-integrator/impd1.c
--- linux-2.6.14-rc5/arch/arm/mach-integrator/impd1.c	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/arch/arm/mach-integrator/impd1.c	2005-10-27 18:17:22.773662048 -0700
@@ -67,7 +67,7 @@
 	}
 	writel(0, impd1->base + IMPD1_LOCK);
 
-#if DEBUG
+#ifdef DEBUG
 	vco.v = val & 0x1ff;
 	vco.r = (val >> 9) & 0x7f;
 	vco.s = (val >> 16) & 7;
@@ -427,17 +427,18 @@
 	return ret;
 }
 
+static int impd1_remove_one(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	return 0;
+}
+
 static void impd1_remove(struct lm_device *dev)
 {
 	struct impd1_module *impd1 = lm_get_drvdata(dev);
-	struct list_head *l, *n;
 	int i;
 
-	list_for_each_safe(l, n, &dev->dev.children) {
-		struct device *d = list_to_dev(l);
-
-		device_unregister(d);
-	}
+	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++)
 		clk_unregister(&impd1->vcos[i]);
diff -urN linux-2.6.14-rc5/arch/arm/mach-pxa/corgi_lcd.c linux-2.6.14/arch/arm/mach-pxa/corgi_lcd.c
--- linux-2.6.14-rc5/arch/arm/mach-pxa/corgi_lcd.c	2005-10-27 18:17:15.766346368 -0700
+++ linux-2.6.14/arch/arm/mach-pxa/corgi_lcd.c	2005-10-27 18:17:22.787662679 -0700
@@ -488,6 +488,7 @@
 
 unsigned long spitz_get_hsync_len(void)
 {
+#ifdef CONFIG_FB_PXA
 	if (!spitz_pxafb_dev) {
 		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
 		if (!spitz_pxafb_dev)
@@ -496,6 +497,7 @@
 	if (!get_hsync_time)
 		get_hsync_time = symbol_get(pxafb_get_hsync_time);
 	if (!get_hsync_time)
+#endif
 		return 0;
 
 	return pxafb_get_hsync_time(spitz_pxafb_dev);
diff -urN linux-2.6.14-rc5/arch/arm/mach-pxa/generic.c linux-2.6.14/arch/arm/mach-pxa/generic.c
--- linux-2.6.14-rc5/arch/arm/mach-pxa/generic.c	2005-10-27 18:17:15.766346368 -0700
+++ linux-2.6.14/arch/arm/mach-pxa/generic.c	2005-10-27 18:17:22.788662724 -0700
@@ -250,6 +250,25 @@
 	i2c_device.dev.platform_data = info;
 }
 
+static struct resource i2s_resources[] = {
+	{
+		.start	= 0x40400000,
+		.end	= 0x40400083,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_I2S,
+		.end	= IRQ_I2S,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2s_device = {
+	.name		= "pxa2xx-i2s",
+	.id		= -1,
+	.resource	= i2c_resources,
+	.num_resources	= ARRAY_SIZE(i2s_resources),
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pxamci_device,
 	&udc_device,
@@ -258,6 +277,7 @@
 	&btuart_device,
 	&stuart_device,
 	&i2c_device,
+	&i2s_device,
 };
 
 static int __init pxa_init(void)
diff -urN linux-2.6.14-rc5/arch/arm/mach-s3c2410/mach-bast.c linux-2.6.14/arch/arm/mach-s3c2410/mach-bast.c
--- linux-2.6.14-rc5/arch/arm/mach-s3c2410/mach-bast.c	2005-10-27 18:17:15.772346638 -0700
+++ linux-2.6.14/arch/arm/mach-s3c2410/mach-bast.c	2005-10-27 18:17:22.794662994 -0700
@@ -307,9 +307,9 @@
 }
 
 static struct s3c2410_platform_nand bast_nand_info = {
-	.tacls		= 40,
-	.twrph0		= 80,
-	.twrph1		= 80,
+	.tacls		= 30,
+	.twrph0		= 60,
+	.twrph1		= 60,
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
 	.sets		= bast_nand_sets,
 	.select_chip	= bast_nand_select,
diff -urN linux-2.6.14-rc5/arch/i386/kernel/cpu/cpufreq/powernow-k8.c linux-2.6.14/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
--- linux-2.6.14-rc5/arch/i386/kernel/cpu/cpufreq/powernow-k8.c	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/arch/i386/kernel/cpu/cpufreq/powernow-k8.c	2005-10-27 18:17:22.842665157 -0700
@@ -44,7 +44,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.3"
+#define VERSION "version 1.50.4"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -111,8 +111,8 @@
 	u32 i = 0;
 
 	do {
-		if (i++ > 0x1000000) {
-			printk(KERN_ERR PFX "detected change pending stuck\n");
+		if (i++ > 10000) {
+			dprintk("detected change pending stuck\n");
 			return 1;
 		}
 		rdmsr(MSR_FIDVID_STATUS, lo, hi);
@@ -159,6 +159,7 @@
 {
 	u32 lo;
 	u32 savevid = data->currvid;
+	u32 i = 0;
 
 	if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
 		printk(KERN_ERR PFX "internal error - overflow on fid write\n");
@@ -170,10 +171,13 @@
 	dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
 		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
 
-	wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+		if (i++ > 100) {
+			printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+			return 1;
+		}			
+	} while (query_current_values_with_pending_wait(data));
 
 	count_off_irt(data);
 
@@ -197,6 +201,7 @@
 {
 	u32 lo;
 	u32 savefid = data->currfid;
+	int i = 0;
 
 	if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
 		printk(KERN_ERR PFX "internal error - overflow on vid write\n");
@@ -208,10 +213,13 @@
 	dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
 		vid, lo, STOP_GRANT_5NS);
 
-	wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+                if (i++ > 100) {
+                        printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+                        return 1;
+                }
+	} while (query_current_values_with_pending_wait(data));
 
 	if (savefid != data->currfid) {
 		printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",
diff -urN linux-2.6.14-rc5/arch/ppc64/kernel/iSeries_htab.c linux-2.6.14/arch/ppc64/kernel/iSeries_htab.c
--- linux-2.6.14-rc5/arch/ppc64/kernel/iSeries_htab.c	2005-10-27 18:17:16.191365515 -0700
+++ linux-2.6.14/arch/ppc64/kernel/iSeries_htab.c	2005-10-27 18:17:23.209681691 -0700
@@ -66,7 +66,7 @@
 	}
 
 	if (slot < 0) {		/* MSB set means secondary group */
-		vflags |= HPTE_V_VALID;
+		vflags |= HPTE_V_SECONDARY;
 		secondary = 1;
 		slot &= 0x7fffffffffffffff;
 	}
diff -urN linux-2.6.14-rc5/arch/ppc64/kernel/mpic.c linux-2.6.14/arch/ppc64/kernel/mpic.c
--- linux-2.6.14-rc5/arch/ppc64/kernel/mpic.c	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/arch/ppc64/kernel/mpic.c	2005-10-27 18:17:23.216682006 -0700
@@ -506,8 +506,8 @@
 	mpic->senses_count = senses_count;
 
 	/* Map the global registers */
-	mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
-	mpic->tmregs = mpic->gregs + (MPIC_TIMER_BASE >> 2);
+	mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x2000);
+	mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2);
 	BUG_ON(mpic->gregs == NULL);
 
 	/* Reset */
diff -urN linux-2.6.14-rc5/arch/ppc64/kernel/time.c linux-2.6.14/arch/ppc64/kernel/time.c
--- linux-2.6.14-rc5/arch/ppc64/kernel/time.c	2005-10-27 18:17:16.217366687 -0700
+++ linux-2.6.14/arch/ppc64/kernel/time.c	2005-10-27 18:17:23.235682862 -0700
@@ -870,7 +870,7 @@
 	rb = ((ra + b) - (x * divisor)) << 32;
 
 	y = (rb + c)/divisor;
-	rc = ((rb + b) - (y * divisor)) << 32;
+	rc = ((rb + c) - (y * divisor)) << 32;
 
 	z = (rc + d)/divisor;
 
diff -urN linux-2.6.14-rc5/arch/ppc64/mm/init.c linux-2.6.14/arch/ppc64/mm/init.c
--- linux-2.6.14-rc5/arch/ppc64/mm/init.c	2005-10-27 18:17:16.228367182 -0700
+++ linux-2.6.14/arch/ppc64/mm/init.c	2005-10-27 18:17:23.247683403 -0700
@@ -799,8 +799,7 @@
 	if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp))
 		local = 1;
 
-	__hash_page(ea, pte_val(pte) & (_PAGE_USER|_PAGE_RW), vsid, ptep,
-		    0x300, local);
+	__hash_page(ea, 0, vsid, ptep, 0x300, local);
 	local_irq_restore(flags);
 }
 
diff -urN linux-2.6.14-rc5/arch/um/include/sysdep-i386/thread.h linux-2.6.14/arch/um/include/sysdep-i386/thread.h
--- linux-2.6.14-rc5/arch/um/include/sysdep-i386/thread.h	2005-10-27 18:17:16.329371732 -0700
+++ linux-2.6.14/arch/um/include/sysdep-i386/thread.h	2005-10-27 18:17:23.347687908 -0700
@@ -4,7 +4,7 @@
 #include <kern_constants.h>
 
 #define TASK_DEBUGREGS(task) ((unsigned long *) &(((char *) (task))[HOST_TASK_DEBUGREGS]))
-#ifdef CONFIG_MODE_TT
+#ifdef UML_CONFIG_MODE_TT
 #define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID]))
 #endif
 
diff -urN linux-2.6.14-rc5/arch/um/include/sysdep-x86_64/thread.h linux-2.6.14/arch/um/include/sysdep-x86_64/thread.h
--- linux-2.6.14-rc5/arch/um/include/sysdep-x86_64/thread.h	2005-10-27 18:17:16.330371777 -0700
+++ linux-2.6.14/arch/um/include/sysdep-x86_64/thread.h	2005-10-27 18:17:23.348687953 -0700
@@ -3,7 +3,7 @@
 
 #include <kern_constants.h>
 
-#ifdef CONFIG_MODE_TT
+#ifdef UML_CONFIG_MODE_TT
 #define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID]))
 #endif
 
diff -urN linux-2.6.14-rc5/drivers/char/drm/drm_vm.c linux-2.6.14/drivers/char/drm/drm_vm.c
--- linux-2.6.14-rc5/drivers/char/drm/drm_vm.c	2005-10-27 18:17:16.711388942 -0700
+++ linux-2.6.14/drivers/char/drm/drm_vm.c	2005-10-27 18:17:23.720704712 -0700
@@ -148,7 +148,8 @@
 
 	offset	 = address - vma->vm_start;
 	i = (unsigned long)map->handle + offset;
-	page = vmalloc_to_page((void *)i);
+	page = (map->type == _DRM_CONSISTENT) ?
+		virt_to_page((void *)i) : vmalloc_to_page((void *)i);
 	if (!page)
 		return NOPAGE_OOM;
 	get_page(page);
diff -urN linux-2.6.14-rc5/drivers/char/drm/mga_drv.h linux-2.6.14/drivers/char/drm/mga_drv.h
--- linux-2.6.14-rc5/drivers/char/drm/mga_drv.h	2005-10-27 18:17:16.732389888 -0700
+++ linux-2.6.14/drivers/char/drm/mga_drv.h	2005-10-27 18:17:23.741705658 -0700
@@ -227,7 +227,7 @@
 #define MGA_EMIT_STATE( dev_priv, dirty )				\
 do {									\
 	if ( (dirty) & ~MGA_UPLOAD_CLIPRECTS ) {			\
-		if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) {	\
+		if ( dev_priv->chipset >= MGA_CARD_TYPE_G400 ) {	\
 			mga_g400_emit_state( dev_priv );		\
 		} else {						\
 			mga_g200_emit_state( dev_priv );		\
diff -urN linux-2.6.14-rc5/drivers/char/drm/mga_state.c linux-2.6.14/drivers/char/drm/mga_state.c
--- linux-2.6.14-rc5/drivers/char/drm/mga_state.c	2005-10-27 18:17:16.734389979 -0700
+++ linux-2.6.14/drivers/char/drm/mga_state.c	2005-10-27 18:17:23.742705703 -0700
@@ -53,7 +53,7 @@
 
 	/* Force reset of DWGCTL on G400 (eliminates clip disable bit).
 	 */
-	if (dev_priv->chipset == MGA_CARD_TYPE_G400) {
+	if (dev_priv->chipset >= MGA_CARD_TYPE_G400) {
 		DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl,
 			  MGA_LEN + MGA_EXEC, 0x80000000,
 			  MGA_DWGCTL, ctx->dwgctl,
diff -urN linux-2.6.14-rc5/drivers/char/drm/radeon_cp.c linux-2.6.14/drivers/char/drm/radeon_cp.c
--- linux-2.6.14-rc5/drivers/char/drm/radeon_cp.c	2005-10-27 18:17:16.741390294 -0700
+++ linux-2.6.14/drivers/char/drm/radeon_cp.c	2005-10-27 18:17:23.749706019 -0700
@@ -1133,10 +1133,10 @@
 		ring_start = (dev_priv->cp_ring->offset
 			      - dev->agp->base
 			      + dev_priv->gart_vm_start);
-       } else
+	} else
 #endif
 		ring_start = (dev_priv->cp_ring->offset
-			      - dev->sg->handle
+			      - (unsigned long)dev->sg->virtual
 			      + dev_priv->gart_vm_start);
 
 	RADEON_WRITE( RADEON_CP_RB_BASE, ring_start );
@@ -1164,7 +1164,8 @@
 		drm_sg_mem_t *entry = dev->sg;
 		unsigned long tmp_ofs, page_ofs;
 
-		tmp_ofs = dev_priv->ring_rptr->offset - dev->sg->handle;
+		tmp_ofs = dev_priv->ring_rptr->offset -
+				(unsigned long)dev->sg->virtual;
 		page_ofs = tmp_ofs >> PAGE_SHIFT;
 
 		RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR,
@@ -1491,8 +1492,8 @@
 	else
 #endif
 		dev_priv->gart_buffers_offset = (dev->agp_buffer_map->offset
-						- dev->sg->handle
-						+ dev_priv->gart_vm_start);
+					- (unsigned long)dev->sg->virtual
+					+ dev_priv->gart_vm_start);
 
 	DRM_DEBUG( "dev_priv->gart_size %d\n",
 		   dev_priv->gart_size );
diff -urN linux-2.6.14-rc5/drivers/cpufreq/cpufreq_conservative.c linux-2.6.14/drivers/cpufreq/cpufreq_conservative.c
--- linux-2.6.14-rc5/drivers/cpufreq/cpufreq_conservative.c	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/drivers/cpufreq/cpufreq_conservative.c	2005-10-27 18:17:23.824709398 -0700
@@ -315,9 +315,9 @@
 	policy = this_dbs_info->cur_policy;
 
 	if ( init_flag == 0 ) {
-		for ( /* NULL */; init_flag < NR_CPUS; init_flag++ ) {
-			dbs_info = &per_cpu(cpu_dbs_info, init_flag);
-			requested_freq[cpu] = dbs_info->cur_policy->cur;
+		for_each_online_cpu(j) {
+			dbs_info = &per_cpu(cpu_dbs_info, j);
+			requested_freq[j] = dbs_info->cur_policy->cur;
 		}
 		init_flag = 1;
 	}
diff -urN linux-2.6.14-rc5/drivers/infiniband/hw/mthca/mthca_eq.c linux-2.6.14/drivers/infiniband/hw/mthca/mthca_eq.c
--- linux-2.6.14-rc5/drivers/infiniband/hw/mthca/mthca_eq.c	2005-10-27 18:17:16.924398539 -0700
+++ linux-2.6.14/drivers/infiniband/hw/mthca/mthca_eq.c	2005-10-27 18:17:23.926713993 -0700
@@ -396,20 +396,21 @@
 		writel(dev->eq_table.clr_mask, dev->eq_table.clr_int);
 
 	ecr = readl(dev->eq_regs.tavor.ecr_base + 4);
-	if (ecr) {
-		writel(ecr, dev->eq_regs.tavor.ecr_base +
-		       MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4);
-
-		for (i = 0; i < MTHCA_NUM_EQ; ++i)
-			if (ecr & dev->eq_table.eq[i].eqn_mask &&
-			    mthca_eq_int(dev, &dev->eq_table.eq[i])) {
+	if (!ecr)
+		return IRQ_NONE;
+
+	writel(ecr, dev->eq_regs.tavor.ecr_base +
+	       MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4);
+
+	for (i = 0; i < MTHCA_NUM_EQ; ++i)
+		if (ecr & dev->eq_table.eq[i].eqn_mask) {
+			if (mthca_eq_int(dev, &dev->eq_table.eq[i]))
 				tavor_set_eq_ci(dev, &dev->eq_table.eq[i],
 						dev->eq_table.eq[i].cons_index);
-				tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn);
-			}
-	}
+			tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn);
+		}
 
-	return IRQ_RETVAL(ecr);
+	return IRQ_HANDLED;
 }
 
 static irqreturn_t mthca_tavor_msi_x_interrupt(int irq, void *eq_ptr,
diff -urN linux-2.6.14-rc5/drivers/md/md.c linux-2.6.14/drivers/md/md.c
--- linux-2.6.14-rc5/drivers/md/md.c	2005-10-27 18:17:17.004402143 -0700
+++ linux-2.6.14/drivers/md/md.c	2005-10-27 18:17:24.003717462 -0700
@@ -3568,7 +3568,8 @@
 		mddev->curr_resync = 2;
 
 	try_again:
-		if (signal_pending(current)) {
+		if (signal_pending(current) ||
+		    kthread_should_stop()) {
 			flush_signals(current);
 			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 			goto skip;
@@ -3590,8 +3591,9 @@
 					 */
 					continue;
 				prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
-				if (!signal_pending(current)
-				    && mddev2->curr_resync >= mddev->curr_resync) {
+				if (!signal_pending(current) &&
+				    !kthread_should_stop() &&
+				    mddev2->curr_resync >= mddev->curr_resync) {
 					printk(KERN_INFO "md: delaying resync of %s"
 					       " until %s has finished resync (they"
 					       " share one or more physical units)\n",
@@ -3697,7 +3699,7 @@
 		}
 
 
-		if (signal_pending(current)) {
+		if (signal_pending(current) || kthread_should_stop()) {
 			/*
 			 * got a signal, exit.
 			 */
diff -urN linux-2.6.14-rc5/drivers/media/video/Kconfig linux-2.6.14/drivers/media/video/Kconfig
--- linux-2.6.14-rc5/drivers/media/video/Kconfig	2005-10-27 18:17:17.057404530 -0700
+++ linux-2.6.14/drivers/media/video/Kconfig	2005-10-27 18:17:24.054719760 -0700
@@ -262,7 +262,6 @@
 	depends on VIDEO_SAA7134 && DVB_CORE
 	select VIDEO_BUF_DVB
 	select DVB_MT352
-	select DVB_CX22702
 	select DVB_TDA1004X
 	---help---
 	  This adds support for DVB cards based on the
diff -urN linux-2.6.14-rc5/drivers/message/fusion/mptsas.c linux-2.6.14/drivers/message/fusion/mptsas.c
--- linux-2.6.14-rc5/drivers/message/fusion/mptsas.c	2005-10-27 18:17:17.145408495 -0700
+++ linux-2.6.14/drivers/message/fusion/mptsas.c	2005-10-27 18:17:24.141723679 -0700
@@ -257,8 +257,8 @@
 	printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
 	printk("Target ID=0x%X\n", pg0->TargetID);
 	printk("Bus=0x%X\n", pg0->Bus);
-	printk("PhyNum=0x%X\n", pg0->PhyNum);
-	printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
+	printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
+	printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
 	printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
 	printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
 	printk("Physical Port=0x%X\n", pg0->PhysicalPort);
@@ -270,7 +270,7 @@
 	printk("---- SAS EXPANDER PAGE 1 ------------\n");
 
 	printk("Physical Port=0x%X\n", pg1->PhysicalPort);
-	printk("PHY Identifier=0x%X\n", pg1->Phy);
+	printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
 	printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
 	printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
 	printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
@@ -604,7 +604,7 @@
 	mptsas_print_expander_pg1(buffer);
 
 	/* save config data */
-	phy_info->phy_id = buffer->Phy;
+	phy_info->phy_id = buffer->PhyIdentifier;
 	phy_info->port_id = buffer->PhysicalPort;
 	phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
 	phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
@@ -825,6 +825,8 @@
 		mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
 			(MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
 			 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
+		port_info->phy_info[i].identify.phy_id =
+		    port_info->phy_info[i].phy_id;
 		handle = port_info->phy_info[i].identify.handle;
 
 		if (port_info->phy_info[i].attached.handle) {
@@ -881,6 +883,8 @@
 				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
 				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
 				port_info->phy_info[i].identify.handle);
+			port_info->phy_info[i].identify.phy_id =
+			    port_info->phy_info[i].phy_id;
 		}
 
 		if (port_info->phy_info[i].attached.handle) {
diff -urN linux-2.6.14-rc5/drivers/pci/quirks.c linux-2.6.14/drivers/pci/quirks.c
--- linux-2.6.14-rc5/drivers/pci/quirks.c	2005-10-27 18:17:17.510424939 -0700
+++ linux-2.6.14/drivers/pci/quirks.c	2005-10-27 18:17:24.504740033 -0700
@@ -241,7 +241,8 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_868,		quirk_s3_64M );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_968,		quirk_s3_64M );
 
-static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr)
+static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
+	unsigned size, int nr, const char *name)
 {
 	region &= ~(size-1);
 	if (region) {
@@ -259,6 +260,7 @@
 		pcibios_bus_to_resource(dev, res, &bus_region);
 
 		pci_claim_resource(dev, nr);
+		printk("PCI quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name);
 	}
 }	
 
@@ -291,25 +293,98 @@
 	u16 region;
 
 	pci_read_config_word(dev, 0xE0, &region);
-	quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
+	quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
 	pci_read_config_word(dev, 0xE2, &region);
-	quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
+	quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL,	PCI_DEVICE_ID_AL_M7101,		quirk_ali7101_acpi );
 
+static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+	u32 devres;
+	u32 mask, size, base;
+
+	pci_read_config_dword(dev, port, &devres);
+	if ((devres & enable) != enable)
+		return;
+	mask = (devres >> 16) & 15;
+	base = devres & 0xffff;
+	size = 16;
+	for (;;) {
+		unsigned bit = size >> 1;
+		if ((bit & mask) == bit)
+			break;
+		size = bit;
+	}
+	/*
+	 * For now we only print it out. Eventually we'll want to
+	 * reserve it (at least if it's in the 0x1000+ range), but
+	 * let's get enough confirmation reports first. 
+	 */
+	base &= -size;
+	printk("%s PIO at %04x-%04x\n", name, base, base + size - 1);
+}
+
+static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+	u32 devres;
+	u32 mask, size, base;
+
+	pci_read_config_dword(dev, port, &devres);
+	if ((devres & enable) != enable)
+		return;
+	base = devres & 0xffff0000;
+	mask = (devres & 0x3f) << 16;
+	size = 128 << 16;
+	for (;;) {
+		unsigned bit = size >> 1;
+		if ((bit & mask) == bit)
+			break;
+		size = bit;
+	}
+	/*
+	 * For now we only print it out. Eventually we'll want to
+	 * reserve it, but let's get enough confirmation reports first. 
+	 */
+	base &= -size;
+	printk("%s MMIO at %04x-%04x\n", name, base, base + size - 1);
+}
+
 /*
  * PIIX4 ACPI: Two IO regions pointed to by longwords at
  *	0x40 (64 bytes of ACPI registers)
  *	0x90 (32 bytes of SMB registers)
+ * and a few strange programmable PIIX4 device resources.
  */
 static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
 {
-	u32 region;
+	u32 region, res_a;
 
 	pci_read_config_dword(dev, 0x40, &region);
-	quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
+	quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
 	pci_read_config_dword(dev, 0x90, &region);
-	quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
+	quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
+
+	/* Device resource A has enables for some of the other ones */
+	pci_read_config_dword(dev, 0x5c, &res_a);
+
+	piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
+	piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
+
+	/* Device resource D is just bitfields for static resources */
+
+	/* Device 12 enabled? */
+	if (res_a & (1 << 29)) {
+		piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
+		piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
+	}
+	/* Device 13 enabled? */
+	if (res_a & (1 << 30)) {
+		piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
+		piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
+	}
+	piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
+	piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82371AB_3,	quirk_piix4_acpi );
 
@@ -323,10 +398,10 @@
 	u32 region;
 
 	pci_read_config_dword(dev, 0x40, &region);
-	quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES);
+	quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO");
 
 	pci_read_config_dword(dev, 0x58, &region);
-	quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1);
+	quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO");
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82801AA_0,		quirk_ich4_lpc_acpi );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82801AB_0,		quirk_ich4_lpc_acpi );
@@ -352,7 +427,7 @@
 	if (rev & 0x10) {
 		pci_read_config_dword(dev, 0x48, &region);
 		region &= PCI_BASE_ADDRESS_IO_MASK;
-		quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES);
+		quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI");
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_vt82c586_acpi );
@@ -372,11 +447,11 @@
 
 	pci_read_config_word(dev, 0x70, &hm);
 	hm &= PCI_BASE_ADDRESS_IO_MASK;
-	quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1);
+	quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c868 HW-mon");
 
 	pci_read_config_dword(dev, 0x90, &smb);
 	smb &= PCI_BASE_ADDRESS_IO_MASK;
-	quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2);
+	quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c868 SMB");
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_vt82c686_acpi );
 
@@ -391,11 +466,11 @@
 
 	pci_read_config_word(dev, 0x88, &pm);
 	pm &= PCI_BASE_ADDRESS_IO_MASK;
-	quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES);
+	quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
 
 	pci_read_config_word(dev, 0xd0, &smb);
 	smb &= PCI_BASE_ADDRESS_IO_MASK;
-	quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1);
+	quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB");
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8235,	quirk_vt8235_acpi);
 
diff -urN linux-2.6.14-rc5/drivers/pci/setup-bus.c linux-2.6.14/drivers/pci/setup-bus.c
--- linux-2.6.14-rc5/drivers/pci/setup-bus.c	2005-10-27 18:17:17.510424939 -0700
+++ linux-2.6.14/drivers/pci/setup-bus.c	2005-10-27 18:17:24.505740078 -0700
@@ -40,7 +40,7 @@
  * FIXME: IO should be max 256 bytes.  However, since we may
  * have a P2P bridge below a cardbus bridge, we need 4K.
  */
-#define CARDBUS_IO_SIZE		(4*1024)
+#define CARDBUS_IO_SIZE		(256)
 #define CARDBUS_MEM_SIZE	(32*1024*1024)
 
 static void __devinit
diff -urN linux-2.6.14-rc5/drivers/scsi/NCR5380.c linux-2.6.14/drivers/scsi/NCR5380.c
--- linux-2.6.14-rc5/drivers/scsi/NCR5380.c	2005-10-27 18:17:17.584428273 -0700
+++ linux-2.6.14/drivers/scsi/NCR5380.c	2005-10-27 18:17:24.578743367 -0700
@@ -91,7 +91,7 @@
 #ifndef NDEBUG
 #define NDEBUG 0
 #endif
-#ifndef NDEBUG
+#ifndef NDEBUG_ABORT
 #define NDEBUG_ABORT 0
 #endif
 
diff -urN linux-2.6.14-rc5/drivers/scsi/aacraid/aacraid.h linux-2.6.14/drivers/scsi/aacraid/aacraid.h
--- linux-2.6.14-rc5/drivers/scsi/aacraid/aacraid.h	2005-10-27 18:17:17.589428498 -0700
+++ linux-2.6.14/drivers/scsi/aacraid/aacraid.h	2005-10-27 18:17:24.582743547 -0700
@@ -19,7 +19,7 @@
 #define AAC_MAX_LUN		(8)
 
 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
-#define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)512)
+#define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)256)
 
 /*
  * These macros convert from physical channels to virtual channels
diff -urN linux-2.6.14-rc5/drivers/scsi/qla2xxx/qla_os.c linux-2.6.14/drivers/scsi/qla2xxx/qla_os.c
--- linux-2.6.14-rc5/drivers/scsi/qla2xxx/qla_os.c	2005-10-27 18:17:17.710433950 -0700
+++ linux-2.6.14/drivers/scsi/qla2xxx/qla_os.c	2005-10-27 18:17:24.703748998 -0700
@@ -1325,6 +1325,8 @@
 	ha->brd_info = brd_info;
 	sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no);
 
+	ha->dpc_pid = -1;
+
 	/* Configure PCI I/O space */
 	ret = qla2x00_iospace_config(ha);
 	if (ret)
@@ -1448,7 +1450,6 @@
 	 */
 	spin_lock_init(&ha->mbx_reg_lock);
 
-	ha->dpc_pid = -1;
 	init_completion(&ha->dpc_inited);
 	init_completion(&ha->dpc_exited);
 
diff -urN linux-2.6.14-rc5/drivers/scsi/scsi_devinfo.c linux-2.6.14/drivers/scsi/scsi_devinfo.c
--- linux-2.6.14-rc5/drivers/scsi/scsi_devinfo.c	2005-10-27 18:17:17.723434535 -0700
+++ linux-2.6.14/drivers/scsi/scsi_devinfo.c	2005-10-27 18:17:24.716749584 -0700
@@ -185,6 +185,7 @@
 	{"PIONEER", "CD-ROM DRM-600", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
 	{"PIONEER", "CD-ROM DRM-602X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
 	{"PIONEER", "CD-ROM DRM-604X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
+	{"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
 	{"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN},
 	{"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN},
 	{"SEAGATE", "ST34555N", "0930", BLIST_NOTQ},	/* Chokes on tagged INQUIRY */
diff -urN linux-2.6.14-rc5/drivers/scsi/scsi_lib.c linux-2.6.14/drivers/scsi/scsi_lib.c
--- linux-2.6.14-rc5/drivers/scsi/scsi_lib.c	2005-10-27 18:17:17.727434715 -0700
+++ linux-2.6.14/drivers/scsi/scsi_lib.c	2005-10-27 18:17:24.720749764 -0700
@@ -97,7 +97,6 @@
 }
 
 static void scsi_run_queue(struct request_queue *q);
-static void scsi_release_buffers(struct scsi_cmnd *cmd);
 
 /*
  * Function:	scsi_unprep_request()
@@ -1040,8 +1039,10 @@
 	 * if sg table allocation fails, requeue request later.
 	 */
 	sgpnt = scsi_alloc_sgtable(cmd, GFP_ATOMIC);
-	if (unlikely(!sgpnt))
+	if (unlikely(!sgpnt)) {
+		scsi_unprep_request(req);
 		return BLKPREP_DEFER;
+	}
 
 	cmd->request_buffer = (char *) sgpnt;
 	cmd->request_bufflen = req->nr_sectors << 9;
@@ -1245,8 +1246,8 @@
 		 */
 		ret = scsi_init_io(cmd);
 		switch(ret) {
+			/* For BLKPREP_KILL/DEFER the cmd was released */
 		case BLKPREP_KILL:
-			/* BLKPREP_KILL return also releases the command */
 			goto kill;
 		case BLKPREP_DEFER:
 			goto defer;
diff -urN linux-2.6.14-rc5/drivers/scsi/scsi_transport_fc.c linux-2.6.14/drivers/scsi/scsi_transport_fc.c
--- linux-2.6.14-rc5/drivers/scsi/scsi_transport_fc.c	2005-10-27 18:17:17.731434896 -0700
+++ linux-2.6.14/drivers/scsi/scsi_transport_fc.c	2005-10-27 18:17:24.724749944 -0700
@@ -819,12 +819,15 @@
 	return snprintf(buf, FC_BINDTYPE_MAX_NAMELEN, "%s\n", name);
 }
 
+#define get_list_head_entry(pos, head, member) 		\
+	pos = list_entry((head)->next, typeof(*pos), member)
+
 static ssize_t
 store_fc_private_host_tgtid_bind_type(struct class_device *cdev,
 	const char *buf, size_t count)
 {
 	struct Scsi_Host *shost = transport_class_to_shost(cdev);
-	struct fc_rport *rport, *next_rport;
+	struct fc_rport *rport;
  	enum fc_tgtid_binding_type val;
 	unsigned long flags;
 
@@ -834,9 +837,13 @@
 	/* if changing bind type, purge all unused consistent bindings */
 	if (val != fc_host_tgtid_bind_type(shost)) {
 		spin_lock_irqsave(shost->host_lock, flags);
-		list_for_each_entry_safe(rport, next_rport,
-				&fc_host_rport_bindings(shost), peers)
+		while (!list_empty(&fc_host_rport_bindings(shost))) {
+			get_list_head_entry(rport,
+				&fc_host_rport_bindings(shost), peers);
+			spin_unlock_irqrestore(shost->host_lock, flags);
 			fc_rport_terminate(rport);
+			spin_lock_irqsave(shost->host_lock, flags);
+		}
 		spin_unlock_irqrestore(shost->host_lock, flags);
 	}
 
diff -urN linux-2.6.14-rc5/drivers/serial/8250_pci.c linux-2.6.14/drivers/serial/8250_pci.c
--- linux-2.6.14-rc5/drivers/serial/8250_pci.c	2005-10-27 18:17:17.749435707 -0700
+++ linux-2.6.14/drivers/serial/8250_pci.c	2005-10-27 18:17:24.743750800 -0700
@@ -152,6 +152,7 @@
 		rc = 4;
 		break;
 	case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
+	case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
 		rc = 1;
 		break;
 	}
@@ -226,8 +227,10 @@
 	}
 
 	irq_config = 0x41;
-	if (dev->vendor == PCI_VENDOR_ID_PANACOM)
+	if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
+	    dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) {
 		irq_config = 0x43;
+	}
 	if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
 	    (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
 		/*
@@ -664,6 +667,15 @@
 	{
 		.vendor		= PCI_VENDOR_ID_PLX,
 		.device		= PCI_DEVICE_ID_PLX_9050,
+		.subvendor	= PCI_SUBVENDOR_ID_EXSYS,
+		.subdevice	= PCI_SUBDEVICE_ID_EXSYS_4055,
+		.init		= pci_plx9050_init,
+		.setup		= pci_default_setup,
+		.exit		= __devexit_p(pci_plx9050_exit),
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= PCI_DEVICE_ID_PLX_9050,
 		.subvendor	= PCI_SUBVENDOR_ID_KEYSPAN,
 		.subdevice	= PCI_SUBDEVICE_ID_KEYSPAN_SX2,
 		.init		= pci_plx9050_init,
@@ -927,6 +939,7 @@
 	pbn_panacom,
 	pbn_panacom2,
 	pbn_panacom4,
+	pbn_exsys_4055,
 	pbn_plx_romulus,
 	pbn_oxsemi,
 	pbn_intel_i960,
@@ -1292,6 +1305,13 @@
 		.reg_shift	= 7,
 	},
 
+	[pbn_exsys_4055] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
 	/* I think this entry is broken - the first_offset looks wrong --rmk */
 	[pbn_plx_romulus] = {
 		.flags		= FL_BASE2,
@@ -1853,6 +1873,10 @@
 		PCI_SUBVENDOR_ID_CHASE_PCIRAS,
 		PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, 
 		pbn_b2_8_460800 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_EXSYS,
+		PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
+		pbn_exsys_4055 },
 	/*
 	 * Megawolf Romulus PCI Serial Card, from Mike Hudson
 	 * (Exoray@isys.ca)
diff -urN linux-2.6.14-rc5/drivers/video/fbsysfs.c linux-2.6.14/drivers/video/fbsysfs.c
--- linux-2.6.14-rc5/drivers/video/fbsysfs.c	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/drivers/video/fbsysfs.c	2005-10-27 18:17:24.914758504 -0700
@@ -242,6 +242,13 @@
 			fb_info->var.yres_virtual);
 }
 
+static ssize_t show_stride(struct class_device *class_device, char *buf)
+{
+	struct fb_info *fb_info =
+		(struct fb_info *)class_get_devdata(class_device);
+	return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->fix.line_length);
+}
+
 /* Format for cmap is "%02x%c%4x%4x%4x\n" */
 /* %02x entry %c transp %4x red %4x blue %4x green \n */
 /* 256 rows at 16 chars equals 4096, the normal page size */
@@ -432,6 +439,7 @@
 	__ATTR(pan, S_IRUGO|S_IWUSR, show_pan, store_pan),
 	__ATTR(virtual_size, S_IRUGO|S_IWUSR, show_virtual, store_virtual),
 	__ATTR(name, S_IRUGO, show_name, NULL),
+	__ATTR(stride, S_IRUGO, show_stride, NULL),
 };
 
 int fb_init_class_device(struct fb_info *fb_info)
diff -urN linux-2.6.14-rc5/fs/aio.c linux-2.6.14/fs/aio.c
--- linux-2.6.14-rc5/fs/aio.c	2005-10-27 18:17:18.065449943 -0700
+++ linux-2.6.14/fs/aio.c	2005-10-27 18:17:25.058764992 -0700
@@ -1397,6 +1397,9 @@
 		if (unlikely(!access_ok(VERIFY_WRITE, kiocb->ki_buf,
 			kiocb->ki_left)))
 			break;
+		ret = security_file_permission(file, MAY_READ);
+		if (unlikely(ret))
+			break;
 		ret = -EINVAL;
 		if (file->f_op->aio_read)
 			kiocb->ki_retry = aio_pread;
@@ -1409,6 +1412,9 @@
 		if (unlikely(!access_ok(VERIFY_READ, kiocb->ki_buf,
 			kiocb->ki_left)))
 			break;
+		ret = security_file_permission(file, MAY_WRITE);
+		if (unlikely(ret))
+			break;
 		ret = -EINVAL;
 		if (file->f_op->aio_write)
 			kiocb->ki_retry = aio_pwrite;
diff -urN linux-2.6.14-rc5/fs/hfsplus/super.c linux-2.6.14/fs/hfsplus/super.c
--- linux-2.6.14-rc5/fs/hfsplus/super.c	2005-10-27 18:17:18.106451790 -0700
+++ linux-2.6.14/fs/hfsplus/super.c	2005-10-27 18:17:25.098766794 -0700
@@ -50,6 +50,7 @@
 	init_MUTEX(&HFSPLUS_I(inode).extents_lock);
 	HFSPLUS_I(inode).flags = 0;
 	HFSPLUS_I(inode).rsrc_inode = NULL;
+	atomic_set(&HFSPLUS_I(inode).opencnt, 0);
 
 	if (inode->i_ino >= HFSPLUS_FIRSTUSER_CNID) {
 	read_inode:
diff -urN linux-2.6.14-rc5/fs/inotify.c linux-2.6.14/fs/inotify.c
--- linux-2.6.14-rc5/fs/inotify.c	2005-10-27 18:17:18.109451925 -0700
+++ linux-2.6.14/fs/inotify.c	2005-10-27 18:17:25.101766929 -0700
@@ -176,6 +176,7 @@
 	if (atomic_dec_and_test(&dev->count)) {
 		atomic_dec(&dev->user->inotify_devs);
 		free_uid(dev->user);
+		idr_destroy(&dev->idr);
 		kfree(dev);
 	}
 }
diff -urN linux-2.6.14-rc5/include/asm-alpha/atomic.h linux-2.6.14/include/asm-alpha/atomic.h
--- linux-2.6.14-rc5/include/asm-alpha/atomic.h	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/include/asm-alpha/atomic.h	2005-10-27 18:17:25.249773597 -0700
@@ -1,6 +1,8 @@
 #ifndef _ALPHA_ATOMIC_H
 #define _ALPHA_ATOMIC_H
 
+#include <asm/barrier.h>
+
 /*
  * Atomic operations that C can't guarantee us.  Useful for
  * resource counting etc...
@@ -100,18 +102,19 @@
 static __inline__ long atomic_add_return(int i, atomic_t * v)
 {
 	long temp, result;
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%1\n"
 	"	addl %0,%3,%2\n"
 	"	addl %0,%3,%0\n"
 	"	stl_c %0,%1\n"
 	"	beq %0,2f\n"
-	"	mb\n"
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
 	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
 	return result;
 }
 
@@ -120,54 +123,57 @@
 static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 {
 	long temp, result;
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%1\n"
 	"	addq %0,%3,%2\n"
 	"	addq %0,%3,%0\n"
 	"	stq_c %0,%1\n"
 	"	beq %0,2f\n"
-	"	mb\n"
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
 	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
 	return result;
 }
 
 static __inline__ long atomic_sub_return(int i, atomic_t * v)
 {
 	long temp, result;
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%1\n"
 	"	subl %0,%3,%2\n"
 	"	subl %0,%3,%0\n"
 	"	stl_c %0,%1\n"
 	"	beq %0,2f\n"
-	"	mb\n"
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
 	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
 	return result;
 }
 
 static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 {
 	long temp, result;
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%1\n"
 	"	subq %0,%3,%2\n"
 	"	subq %0,%3,%0\n"
 	"	stq_c %0,%1\n"
 	"	beq %0,2f\n"
-	"	mb\n"
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
 	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
 	return result;
 }
 
diff -urN linux-2.6.14-rc5/include/asm-alpha/barrier.h linux-2.6.14/include/asm-alpha/barrier.h
--- linux-2.6.14-rc5/include/asm-alpha/barrier.h	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.14/include/asm-alpha/barrier.h	2005-10-27 18:17:25.249773597 -0700
@@ -0,0 +1,34 @@
+#ifndef __BARRIER_H
+#define __BARRIER_H
+
+#define mb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define rmb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define wmb() \
+__asm__ __volatile__("wmb": : :"memory")
+
+#define read_barrier_depends() \
+__asm__ __volatile__("mb": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	barrier()
+#endif
+
+#define set_mb(var, value) \
+do { var = value; mb(); } while (0)
+
+#define set_wmb(var, value) \
+do { var = value; wmb(); } while (0)
+
+#endif		/* __BARRIER_H */
diff -urN linux-2.6.14-rc5/include/asm-alpha/system.h linux-2.6.14/include/asm-alpha/system.h
--- linux-2.6.14-rc5/include/asm-alpha/system.h	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/include/asm-alpha/system.h	2005-10-27 18:17:25.254773822 -0700
@@ -4,6 +4,7 @@
 #include <linux/config.h>
 #include <asm/pal.h>
 #include <asm/page.h>
+#include <asm/barrier.h>
 
 /*
  * System defines.. Note that this is included both from .c and .S
@@ -139,36 +140,6 @@
 struct task_struct;
 extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*);
 
-#define mb() \
-__asm__ __volatile__("mb": : :"memory")
-
-#define rmb() \
-__asm__ __volatile__("mb": : :"memory")
-
-#define wmb() \
-__asm__ __volatile__("wmb": : :"memory")
-
-#define read_barrier_depends() \
-__asm__ __volatile__("mb": : :"memory")
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	barrier()
-#endif
-
-#define set_mb(var, value) \
-do { var = value; mb(); } while (0)
-
-#define set_wmb(var, value) \
-do { var = value; wmb(); } while (0)
-
 #define imb() \
 __asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")
 
diff -urN linux-2.6.14-rc5/include/asm-arm/arch-s3c2410/regs-clock.h linux-2.6.14/include/asm-arm/arch-s3c2410/regs-clock.h
--- linux-2.6.14-rc5/include/asm-arm/arch-s3c2410/regs-clock.h	2005-10-27 18:17:18.281459674 -0700
+++ linux-2.6.14/include/asm-arm/arch-s3c2410/regs-clock.h	2005-10-27 18:17:25.273774678 -0700
@@ -18,7 +18,9 @@
  *    10-Feb-2005 Ben Dooks	    Fixed CAMDIVN address (Guillaume Gourat)
  *    10-Mar-2005 Lucas Villa Real  Changed S3C2410_VA to S3C24XX_VA
  *    27-Aug-2005 Ben Dooks	    Add clock-slow info
- */
+ *    20-Oct-2005 Ben Dooks	    Fixed overflow in PLL (Guillaume Gourat)
+ *    20-Oct-2005 Ben Dooks	    Add masks for DCLK (Guillaume Gourat)
+*/
 
 #ifndef __ASM_ARM_REGS_CLOCK
 #define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
@@ -66,11 +68,16 @@
 #define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
 #define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
 #define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
+#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
 
 #define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
 #define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
 #define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
 #define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
+#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
 
 #define S3C2410_CLKDIVN_PDIVN	     (1<<0)
 #define S3C2410_CLKDIVN_HDIVN	     (1<<1)
@@ -83,10 +90,13 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/div64.h>
+
 static inline unsigned int
-s3c2410_get_pll(int pllval, int baseclk)
+s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
 {
-	int mdiv, pdiv, sdiv;
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
 
 	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
 	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
@@ -96,7 +106,10 @@
 	pdiv &= S3C2410_PLLCON_PDIVMASK;
 	sdiv &= S3C2410_PLLCON_SDIVMASK;
 
-	return (baseclk * (mdiv + 8)) / ((pdiv + 2) << sdiv);
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
 }
 
 #endif /* __ASSEMBLY__ */
diff -urN linux-2.6.14-rc5/include/asm-arm/bitops.h linux-2.6.14/include/asm-arm/bitops.h
--- linux-2.6.14-rc5/include/asm-arm/bitops.h	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/include/asm-arm/bitops.h	2005-10-27 18:17:25.274774723 -0700
@@ -347,7 +347,6 @@
  * the clz instruction for much better code efficiency.
  */
 
-static __inline__ int generic_fls(int x);
 #define fls(x) \
 	( __builtin_constant_p(x) ? generic_fls(x) : \
 	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
diff -urN linux-2.6.14-rc5/include/asm-x86_64/pci.h linux-2.6.14/include/asm-x86_64/pci.h
--- linux-2.6.14-rc5/include/asm-x86_64/pci.h	2005-10-27 18:17:18.605474271 -0700
+++ linux-2.6.14/include/asm-x86_64/pci.h	2005-08-28 16:41:01.000000000 -0700
@@ -50,10 +50,10 @@
  * address space.  The networking and block device layers use
  * this boolean for bounce buffer decisions
  *
- * On x86-64 it mostly equals, but we set it to zero to tell some subsystems
- * that an hard or soft IOMMU is available.
+ * On AMD64 it mostly equals, but we set it to zero to tell some subsystems
+ * that an IOMMU is available.
  */
-#define PCI_DMA_BUS_IS_PHYS 0
+#define PCI_DMA_BUS_IS_PHYS	(no_iommu ? 1 : 0)
 
 /*
  * x86-64 always supports DAC, but sometimes it is useful to force
diff -urN linux-2.6.14-rc5/include/linux/hugetlb.h linux-2.6.14/include/linux/hugetlb.h
--- linux-2.6.14-rc5/include/linux/hugetlb.h	2005-10-27 18:17:18.636475668 -0700
+++ linux-2.6.14/include/linux/hugetlb.h	2005-10-27 18:17:25.625790536 -0700
@@ -25,6 +25,8 @@
 unsigned long hugetlb_total_pages(void);
 struct page *alloc_huge_page(void);
 void free_huge_page(struct page *);
+int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
+			unsigned long address, int write_access);
 
 extern unsigned long max_huge_pages;
 extern const unsigned long hugetlb_zero, hugetlb_infinity;
@@ -99,6 +101,7 @@
 						do { } while (0)
 #define alloc_huge_page()			({ NULL; })
 #define free_huge_page(p)			({ (void)(p); BUG(); })
+#define hugetlb_fault(mm, vma, addr, write)	({ BUG(); 0; })
 
 #ifndef HPAGE_MASK
 #define HPAGE_MASK	0		/* Keep the compiler happy */
@@ -155,24 +158,11 @@
 {
 	file->f_op = &hugetlbfs_file_operations;
 }
-
-static inline int valid_hugetlb_file_off(struct vm_area_struct *vma, 
-					  unsigned long address) 
-{
-	struct inode *inode = vma->vm_file->f_dentry->d_inode;
-	loff_t file_off = address - vma->vm_start;
-	
-	file_off += (vma->vm_pgoff << PAGE_SHIFT);
-	
-	return (file_off < inode->i_size);
-}
-
 #else /* !CONFIG_HUGETLBFS */
 
 #define is_file_hugepages(file)		0
 #define set_file_hugepages(file)	BUG()
 #define hugetlb_zero_setup(size)	ERR_PTR(-ENOSYS)
-#define valid_hugetlb_file_off(vma, address) 	0
 
 #endif /* !CONFIG_HUGETLBFS */
 
diff -urN linux-2.6.14-rc5/include/linux/idr.h linux-2.6.14/include/linux/idr.h
--- linux-2.6.14-rc5/include/linux/idr.h	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/include/linux/idr.h	2005-10-27 18:17:25.632790851 -0700
@@ -75,4 +75,5 @@
 int idr_get_new(struct idr *idp, void *ptr, int *id);
 int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
 void idr_remove(struct idr *idp, int id);
+void idr_destroy(struct idr *idp);
 void idr_init(struct idr *idp);
diff -urN linux-2.6.14-rc5/include/linux/pci_ids.h linux-2.6.14/include/linux/pci_ids.h
--- linux-2.6.14-rc5/include/linux/pci_ids.h	2005-10-27 18:17:18.679477605 -0700
+++ linux-2.6.14/include/linux/pci_ids.h	2005-10-27 18:17:25.667792428 -0700
@@ -723,6 +723,7 @@
 #define PCI_DEVICE_ID_HP_DIVA_EVEREST	0x1282
 #define PCI_DEVICE_ID_HP_DIVA_AUX	0x1290
 #define PCI_DEVICE_ID_HP_DIVA_RMP3	0x1301
+#define PCI_DEVICE_ID_HP_DIVA_HURRICANE	0x132a
 #define PCI_DEVICE_ID_HP_CISS		0x3210
 #define PCI_DEVICE_ID_HP_CISSA		0x3220
 #define PCI_DEVICE_ID_HP_CISSB		0x3222
@@ -2696,6 +2697,7 @@
 
 #define PCI_SUBVENDOR_ID_EXSYS		0xd84d
 #define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
+#define PCI_SUBDEVICE_ID_EXSYS_4055	0x4055
 
 #define PCI_VENDOR_ID_TIGERJET		0xe159
 #define PCI_DEVICE_ID_TIGERJET_300	0x0001
diff -urN linux-2.6.14-rc5/include/net/ax25.h linux-2.6.14/include/net/ax25.h
--- linux-2.6.14-rc5/include/net/ax25.h	2005-10-27 18:17:18.715479227 -0700
+++ linux-2.6.14/include/net/ax25.h	2005-10-27 18:17:25.702794005 -0700
@@ -171,7 +171,7 @@
 	ax25_address		calls[AX25_MAX_DIGIS];
 	unsigned char		repeated[AX25_MAX_DIGIS];
 	unsigned char		ndigi;
-	char			lastrepeat;
+	signed char		lastrepeat;
 } ax25_digi;
 
 typedef struct ax25_route {
diff -urN linux-2.6.14-rc5/include/net/llc_pdu.h linux-2.6.14/include/net/llc_pdu.h
--- linux-2.6.14-rc5/include/net/llc_pdu.h	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/include/net/llc_pdu.h	2005-10-27 18:17:25.713794501 -0700
@@ -254,8 +254,10 @@
 {
 	if (skb->protocol == ntohs(ETH_P_802_2))
 		memcpy(sa, eth_hdr(skb)->h_source, ETH_ALEN);
-	else if (skb->protocol == ntohs(ETH_P_TR_802_2))
+	else if (skb->protocol == ntohs(ETH_P_TR_802_2)) {
 		memcpy(sa, tr_hdr(skb)->saddr, ETH_ALEN);
+		*sa &= 0x7F;
+	}
 }
 
 /**
diff -urN linux-2.6.14-rc5/kernel/exit.c linux-2.6.14/kernel/exit.c
--- linux-2.6.14-rc5/kernel/exit.c	2005-10-27 18:17:18.772481795 -0700
+++ linux-2.6.14/kernel/exit.c	2005-10-27 18:17:25.758796528 -0700
@@ -843,6 +843,7 @@
 	group_dead = atomic_dec_and_test(&tsk->signal->live);
 	if (group_dead) {
  		del_timer_sync(&tsk->signal->real_timer);
+		exit_itimers(tsk->signal);
 		acct_process(code);
 	}
 	exit_mm(tsk);
diff -urN linux-2.6.14-rc5/kernel/posix-cpu-timers.c linux-2.6.14/kernel/posix-cpu-timers.c
--- linux-2.6.14-rc5/kernel/posix-cpu-timers.c	2005-10-27 18:17:18.778482065 -0700
+++ linux-2.6.14/kernel/posix-cpu-timers.c	2005-10-27 18:17:25.765796843 -0700
@@ -91,7 +91,7 @@
  * Update expiry time from increment, and increase overrun count,
  * given the current clock sample.
  */
-static inline void bump_cpu_timer(struct k_itimer *timer,
+static void bump_cpu_timer(struct k_itimer *timer,
 				  union cpu_time_count now)
 {
 	int i;
@@ -110,7 +110,7 @@
 		for (i = 0; incr < delta - incr; i++)
 			incr = incr << 1;
 		for (; i >= 0; incr >>= 1, i--) {
-			if (delta <= incr)
+			if (delta < incr)
 				continue;
 			timer->it.cpu.expires.sched += incr;
 			timer->it_overrun += 1 << i;
@@ -128,7 +128,7 @@
 		for (i = 0; cputime_lt(incr, cputime_sub(delta, incr)); i++)
 			     incr = cputime_add(incr, incr);
 		for (; i >= 0; incr = cputime_halve(incr), i--) {
-			if (cputime_le(delta, incr))
+			if (cputime_lt(delta, incr))
 				continue;
 			timer->it.cpu.expires.cpu =
 				cputime_add(timer->it.cpu.expires.cpu, incr);
@@ -380,28 +380,31 @@
 int posix_cpu_timer_del(struct k_itimer *timer)
 {
 	struct task_struct *p = timer->it.cpu.task;
+	int ret = 0;
 
-	if (timer->it.cpu.firing)
-		return TIMER_RETRY;
-
-	if (unlikely(p == NULL))
-		return 0;
+	if (likely(p != NULL)) {
+		read_lock(&tasklist_lock);
+		if (unlikely(p->signal == NULL)) {
+			/*
+			 * We raced with the reaping of the task.
+			 * The deletion should have cleared us off the list.
+			 */
+			BUG_ON(!list_empty(&timer->it.cpu.entry));
+		} else {
+			spin_lock(&p->sighand->siglock);
+			if (timer->it.cpu.firing)
+				ret = TIMER_RETRY;
+			else
+				list_del(&timer->it.cpu.entry);
+			spin_unlock(&p->sighand->siglock);
+		}
+		read_unlock(&tasklist_lock);
 
-	spin_lock(&p->sighand->siglock);
-	if (!list_empty(&timer->it.cpu.entry)) {
-		/*
-		 * Take us off the task's timer list.  We don't need to
-		 * take tasklist_lock and check for the task being reaped.
-		 * If it was reaped, it already called posix_cpu_timers_exit
-		 * and posix_cpu_timers_exit_group to clear all the timers
-		 * that pointed to it.
-		 */
-		list_del(&timer->it.cpu.entry);
-		put_task_struct(p);
+		if (!ret)
+			put_task_struct(p);
 	}
-	spin_unlock(&p->sighand->siglock);
 
-	return 0;
+	return ret;
 }
 
 /*
@@ -418,8 +421,6 @@
 	cputime_t ptime = cputime_add(utime, stime);
 
 	list_for_each_entry_safe(timer, next, head, entry) {
-		put_task_struct(timer->task);
-		timer->task = NULL;
 		list_del_init(&timer->entry);
 		if (cputime_lt(timer->expires.cpu, ptime)) {
 			timer->expires.cpu = cputime_zero;
@@ -431,8 +432,6 @@
 
 	++head;
 	list_for_each_entry_safe(timer, next, head, entry) {
-		put_task_struct(timer->task);
-		timer->task = NULL;
 		list_del_init(&timer->entry);
 		if (cputime_lt(timer->expires.cpu, utime)) {
 			timer->expires.cpu = cputime_zero;
@@ -444,8 +443,6 @@
 
 	++head;
 	list_for_each_entry_safe(timer, next, head, entry) {
-		put_task_struct(timer->task);
-		timer->task = NULL;
 		list_del_init(&timer->entry);
 		if (timer->expires.sched < sched_time) {
 			timer->expires.sched = 0;
@@ -489,6 +486,9 @@
  	struct task_struct *t = p;
 	unsigned int nthreads = atomic_read(&p->signal->live);
 
+	if (!nthreads)
+		return;
+
 	switch (clock_idx) {
 	default:
 		BUG();
@@ -497,7 +497,7 @@
 		left = cputime_div(cputime_sub(expires.cpu, val.cpu),
 				   nthreads);
 		do {
-			if (!unlikely(t->exit_state)) {
+			if (!unlikely(t->flags & PF_EXITING)) {
 				ticks = cputime_add(prof_ticks(t), left);
 				if (cputime_eq(t->it_prof_expires,
 					       cputime_zero) ||
@@ -512,7 +512,7 @@
 		left = cputime_div(cputime_sub(expires.cpu, val.cpu),
 				   nthreads);
 		do {
-			if (!unlikely(t->exit_state)) {
+			if (!unlikely(t->flags & PF_EXITING)) {
 				ticks = cputime_add(virt_ticks(t), left);
 				if (cputime_eq(t->it_virt_expires,
 					       cputime_zero) ||
@@ -527,7 +527,7 @@
 		nsleft = expires.sched - val.sched;
 		do_div(nsleft, nthreads);
 		do {
-			if (!unlikely(t->exit_state)) {
+			if (!unlikely(t->flags & PF_EXITING)) {
 				ns = t->sched_time + nsleft;
 				if (t->it_sched_expires == 0 ||
 				    t->it_sched_expires > ns) {
@@ -566,6 +566,9 @@
 	struct cpu_timer_list *next;
 	unsigned long i;
 
+	if (CPUCLOCK_PERTHREAD(timer->it_clock)	&& (p->flags & PF_EXITING))
+		return;
+
 	head = (CPUCLOCK_PERTHREAD(timer->it_clock) ?
 		p->cpu_timers : p->signal->cpu_timers);
 	head += CPUCLOCK_WHICH(timer->it_clock);
@@ -576,17 +579,15 @@
 	listpos = head;
 	if (CPUCLOCK_WHICH(timer->it_clock) == CPUCLOCK_SCHED) {
 		list_for_each_entry(next, head, entry) {
-			if (next->expires.sched > nt->expires.sched) {
-				listpos = &next->entry;
+			if (next->expires.sched > nt->expires.sched)
 				break;
-			}
+			listpos = &next->entry;
 		}
 	} else {
 		list_for_each_entry(next, head, entry) {
-			if (cputime_gt(next->expires.cpu, nt->expires.cpu)) {
-				listpos = &next->entry;
+			if (cputime_gt(next->expires.cpu, nt->expires.cpu))
 				break;
-			}
+			listpos = &next->entry;
 		}
 	}
 	list_add(&nt->entry, listpos);
@@ -730,9 +731,15 @@
 	 * Disarm any old timer after extracting its expiry time.
 	 */
 	BUG_ON(!irqs_disabled());
+
+	ret = 0;
 	spin_lock(&p->sighand->siglock);
 	old_expires = timer->it.cpu.expires;
-	list_del_init(&timer->it.cpu.entry);
+	if (unlikely(timer->it.cpu.firing)) {
+		timer->it.cpu.firing = -1;
+		ret = TIMER_RETRY;
+	} else
+		list_del_init(&timer->it.cpu.entry);
 	spin_unlock(&p->sighand->siglock);
 
 	/*
@@ -780,7 +787,7 @@
 		}
 	}
 
-	if (unlikely(timer->it.cpu.firing)) {
+	if (unlikely(ret)) {
 		/*
 		 * We are colliding with the timer actually firing.
 		 * Punt after filling in the timer's old value, and
@@ -788,8 +795,6 @@
 		 * it as an overrun (thanks to bump_cpu_timer above).
 		 */
 		read_unlock(&tasklist_lock);
-		timer->it.cpu.firing = -1;
-		ret = TIMER_RETRY;
 		goto out;
 	}
 
@@ -955,14 +960,16 @@
 static void check_thread_timers(struct task_struct *tsk,
 				struct list_head *firing)
 {
+	int maxfire;
 	struct list_head *timers = tsk->cpu_timers;
 
+	maxfire = 20;
 	tsk->it_prof_expires = cputime_zero;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (cputime_lt(prof_ticks(tsk), t->expires.cpu)) {
+		if (!--maxfire || cputime_lt(prof_ticks(tsk), t->expires.cpu)) {
 			tsk->it_prof_expires = t->expires.cpu;
 			break;
 		}
@@ -971,12 +978,13 @@
 	}
 
 	++timers;
+	maxfire = 20;
 	tsk->it_virt_expires = cputime_zero;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (cputime_lt(virt_ticks(tsk), t->expires.cpu)) {
+		if (!--maxfire || cputime_lt(virt_ticks(tsk), t->expires.cpu)) {
 			tsk->it_virt_expires = t->expires.cpu;
 			break;
 		}
@@ -985,12 +993,13 @@
 	}
 
 	++timers;
+	maxfire = 20;
 	tsk->it_sched_expires = 0;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (tsk->sched_time < t->expires.sched) {
+		if (!--maxfire || tsk->sched_time < t->expires.sched) {
 			tsk->it_sched_expires = t->expires.sched;
 			break;
 		}
@@ -1007,6 +1016,7 @@
 static void check_process_timers(struct task_struct *tsk,
 				 struct list_head *firing)
 {
+	int maxfire;
 	struct signal_struct *const sig = tsk->signal;
 	cputime_t utime, stime, ptime, virt_expires, prof_expires;
 	unsigned long long sched_time, sched_expires;
@@ -1039,12 +1049,13 @@
 	} while (t != tsk);
 	ptime = cputime_add(utime, stime);
 
+	maxfire = 20;
 	prof_expires = cputime_zero;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (cputime_lt(ptime, t->expires.cpu)) {
+		if (!--maxfire || cputime_lt(ptime, t->expires.cpu)) {
 			prof_expires = t->expires.cpu;
 			break;
 		}
@@ -1053,12 +1064,13 @@
 	}
 
 	++timers;
+	maxfire = 20;
 	virt_expires = cputime_zero;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (cputime_lt(utime, t->expires.cpu)) {
+		if (!--maxfire || cputime_lt(utime, t->expires.cpu)) {
 			virt_expires = t->expires.cpu;
 			break;
 		}
@@ -1067,12 +1079,13 @@
 	}
 
 	++timers;
+	maxfire = 20;
 	sched_expires = 0;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (sched_time < t->expires.sched) {
+		if (!--maxfire || sched_time < t->expires.sched) {
 			sched_expires = t->expires.sched;
 			break;
 		}
@@ -1155,6 +1168,9 @@
 		unsigned long long sched_left, sched;
 		const unsigned int nthreads = atomic_read(&sig->live);
 
+		if (!nthreads)
+			return;
+
 		prof_left = cputime_sub(prof_expires, utime);
 		prof_left = cputime_sub(prof_left, stime);
 		prof_left = cputime_div(prof_left, nthreads);
@@ -1191,7 +1207,7 @@
 
 			do {
 				t = next_thread(t);
-			} while (unlikely(t->exit_state));
+			} while (unlikely(t->flags & PF_EXITING));
 		} while (t != tsk);
 	}
 }
diff -urN linux-2.6.14-rc5/kernel/posix-timers.c linux-2.6.14/kernel/posix-timers.c
--- linux-2.6.14-rc5/kernel/posix-timers.c	2005-10-27 18:17:18.779482110 -0700
+++ linux-2.6.14/kernel/posix-timers.c	2005-10-27 18:17:25.766796888 -0700
@@ -1157,7 +1157,7 @@
 }
 
 /*
- * This is called by __exit_signal, only when there are no more
+ * This is called by do_exit or de_thread, only when there are no more
  * references to the shared signal_struct.
  */
 void exit_itimers(struct signal_struct *sig)
diff -urN linux-2.6.14-rc5/kernel/sched.c linux-2.6.14/kernel/sched.c
--- linux-2.6.14-rc5/kernel/sched.c	2005-10-27 18:17:18.788482516 -0700
+++ linux-2.6.14/kernel/sched.c	2005-10-27 18:17:25.775797294 -0700
@@ -3879,6 +3879,7 @@
 
 #ifndef CONFIG_SMP
 cpumask_t cpu_online_map = CPU_MASK_ALL;
+EXPORT_SYMBOL_GPL(cpu_online_map);
 cpumask_t cpu_possible_map = CPU_MASK_ALL;
 #endif
 
diff -urN linux-2.6.14-rc5/kernel/signal.c linux-2.6.14/kernel/signal.c
--- linux-2.6.14-rc5/kernel/signal.c	2005-10-27 18:17:18.790482606 -0700
+++ linux-2.6.14/kernel/signal.c	2005-10-27 18:17:25.777797384 -0700
@@ -397,20 +397,8 @@
 	flush_sigqueue(&tsk->pending);
 	if (sig) {
 		/*
-		 * We are cleaning up the signal_struct here.  We delayed
-		 * calling exit_itimers until after flush_sigqueue, just in
-		 * case our thread-local pending queue contained a queued
-		 * timer signal that would have been cleared in
-		 * exit_itimers.  When that called sigqueue_free, it would
-		 * attempt to re-take the tasklist_lock and deadlock.  This
-		 * can never happen if we ensure that all queues the
-		 * timer's signal might be queued on have been flushed
-		 * first.  The shared_pending queue, and our own pending
-		 * queue are the only queues the timer could be on, since
-		 * there are no other threads left in the group and timer
-		 * signals are constrained to threads inside the group.
+		 * We are cleaning up the signal_struct here.
 		 */
-		exit_itimers(sig);
 		exit_thread_group_keys(sig);
 		kmem_cache_free(signal_cachep, sig);
 	}
diff -urN linux-2.6.14-rc5/lib/idr.c linux-2.6.14/lib/idr.c
--- linux-2.6.14-rc5/lib/idr.c	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/lib/idr.c	2005-10-27 18:17:25.784797699 -0700
@@ -346,6 +346,19 @@
 EXPORT_SYMBOL(idr_remove);
 
 /**
+ * idr_destroy - release all cached layers within an idr tree
+ * idp: idr handle
+ */
+void idr_destroy(struct idr *idp)
+{
+	while (idp->id_free_cnt) {
+		struct idr_layer *p = alloc_layer(idp);
+		kmem_cache_free(idr_layer_cache, p);
+	}
+}
+EXPORT_SYMBOL(idr_destroy);
+
+/**
  * idr_find - return pointer for given id
  * @idp: idr handle
  * @id: lookup key
diff -urN linux-2.6.14-rc5/mm/hugetlb.c linux-2.6.14/mm/hugetlb.c
--- linux-2.6.14-rc5/mm/hugetlb.c	2005-10-27 18:17:18.804483237 -0700
+++ linux-2.6.14/mm/hugetlb.c	2005-10-27 18:17:25.790797970 -0700
@@ -394,6 +394,28 @@
 	return ret;
 }
 
+/*
+ * On ia64 at least, it is possible to receive a hugetlb fault from a
+ * stale zero entry left in the TLB from earlier hardware prefetching.
+ * Low-level arch code should already have flushed the stale entry as
+ * part of its fault handling, but we do need to accept this minor fault
+ * and return successfully.  Whereas the "normal" case is that this is
+ * an access to a hugetlb page which has been truncated off since mmap.
+ */
+int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
+			unsigned long address, int write_access)
+{
+	int ret = VM_FAULT_SIGBUS;
+	pte_t *pte;
+
+	spin_lock(&mm->page_table_lock);
+	pte = huge_pte_offset(mm, address);
+	if (pte && !pte_none(*pte))
+		ret = VM_FAULT_MINOR;
+	spin_unlock(&mm->page_table_lock);
+	return ret;
+}
+
 int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			struct page **pages, struct vm_area_struct **vmas,
 			unsigned long *position, int *length, int i)
diff -urN linux-2.6.14-rc5/mm/memory.c linux-2.6.14/mm/memory.c
--- linux-2.6.14-rc5/mm/memory.c	2005-10-27 18:17:18.805483282 -0700
+++ linux-2.6.14/mm/memory.c	2005-10-27 18:17:25.792798060 -0700
@@ -2045,18 +2045,8 @@
 
 	inc_page_state(pgfault);
 
-	if (unlikely(is_vm_hugetlb_page(vma))) {
-		if (valid_hugetlb_file_off(vma, address))
-			/* We get here only if there was a stale(zero) TLB entry 
-			 * (because of  HW prefetching). 
-			 * Low-level arch code (if needed) should have already
-			 * purged the stale entry as part of this fault handling.  
-			 * Here we just return.
-			 */
-			return VM_FAULT_MINOR; 
-		else
-			return VM_FAULT_SIGBUS;	/* mapping truncation does this. */
-	}
+	if (unlikely(is_vm_hugetlb_page(vma)))
+		return hugetlb_fault(mm, vma, address, write_access);
 
 	/*
 	 * We need the page table lock to synchronize with kswapd
diff -urN linux-2.6.14-rc5/mm/page_alloc.c linux-2.6.14/mm/page_alloc.c
--- linux-2.6.14-rc5/mm/page_alloc.c	2005-10-27 18:17:18.812483597 -0700
+++ linux-2.6.14/mm/page_alloc.c	2005-10-27 18:17:25.798798330 -0700
@@ -1750,6 +1750,8 @@
 {
 	struct per_cpu_pages *pcp;
 
+	memset(p, 0, sizeof(*p));
+
 	pcp = &p->pcp[0];		/* hot */
 	pcp->count = 0;
 	pcp->low = 2 * batch;
diff -urN linux-2.6.14-rc5/net/802/tr.c linux-2.6.14/net/802/tr.c
--- linux-2.6.14-rc5/net/802/tr.c	2005-10-27 18:17:18.825484183 -0700
+++ linux-2.6.14/net/802/tr.c	2005-10-27 18:17:25.812798961 -0700
@@ -340,9 +340,10 @@
 	unsigned int hash, rii_p = 0;
 	unsigned long flags;
 	struct rif_cache *entry;
-
+	unsigned char saddr0;
 
 	spin_lock_irqsave(&rif_lock, flags);
+	saddr0 = trh->saddr[0];
 	
 	/*
 	 *	Firstly see if the entry exists
@@ -395,7 +396,6 @@
 			entry->rcf = trh->rcf & htons((unsigned short)~TR_RCF_BROADCAST_MASK);
 			memcpy(&(entry->rseg[0]),&(trh->rseg[0]),8*sizeof(unsigned short));
 			entry->local_ring = 0;
-			trh->saddr[0]|=TR_RII; /* put the routing indicator back for tcpdump */
 		}
 		else
 		{
@@ -422,6 +422,7 @@
 		    }                                         
            	entry->last_used=jiffies;               
 	}
+	trh->saddr[0]=saddr0; /* put the routing indicator back for tcpdump */
 	spin_unlock_irqrestore(&rif_lock, flags);
 }
 
diff -urN linux-2.6.14-rc5/net/core/neighbour.c linux-2.6.14/net/core/neighbour.c
--- linux-2.6.14-rc5/net/core/neighbour.c	2005-10-27 18:17:18.855485534 -0700
+++ linux-2.6.14/net/core/neighbour.c	2005-10-27 18:17:25.841800267 -0700
@@ -175,39 +175,10 @@
 	}
 }
 
-void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev)
-{
-	int i;
-
-	write_lock_bh(&tbl->lock);
-
-	for (i=0; i <= tbl->hash_mask; i++) {
-		struct neighbour *n, **np;
-
-		np = &tbl->hash_buckets[i];
-		while ((n = *np) != NULL) {
-			if (dev && n->dev != dev) {
-				np = &n->next;
-				continue;
-			}
-			*np = n->next;
-			write_lock_bh(&n->lock);
-			n->dead = 1;
-			neigh_del_timer(n);
-			write_unlock_bh(&n->lock);
-			neigh_release(n);
-		}
-	}
-
-        write_unlock_bh(&tbl->lock);
-}
-
-int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev)
+static void neigh_flush_dev(struct neigh_table *tbl, struct net_device *dev)
 {
 	int i;
 
-	write_lock_bh(&tbl->lock);
-
 	for (i = 0; i <= tbl->hash_mask; i++) {
 		struct neighbour *n, **np = &tbl->hash_buckets[i];
 
@@ -243,7 +214,19 @@
 			neigh_release(n);
 		}
 	}
+}
 
+void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev)
+{
+	write_lock_bh(&tbl->lock);
+	neigh_flush_dev(tbl, dev);
+	write_unlock_bh(&tbl->lock);
+}
+
+int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev)
+{
+	write_lock_bh(&tbl->lock);
+	neigh_flush_dev(tbl, dev);
 	pneigh_ifdown(tbl, dev);
 	write_unlock_bh(&tbl->lock);
 
@@ -732,6 +715,7 @@
 	if (unlikely(mod_timer(&n->timer, when))) {
 		printk("NEIGH: BUG, double timer add, state is %x\n",
 		       n->nud_state);
+		dump_stack();
 	}
 }
 
@@ -815,10 +799,10 @@
 	}
 
 	if (neigh->nud_state & NUD_IN_TIMER) {
-		neigh_hold(neigh);
 		if (time_before(next, jiffies + HZ/2))
 			next = jiffies + HZ/2;
-		neigh_add_timer(neigh, next);
+		if (!mod_timer(&neigh->timer, next))
+			neigh_hold(neigh);
 	}
 	if (neigh->nud_state & (NUD_INCOMPLETE | NUD_PROBE)) {
 		struct sk_buff *skb = skb_peek(&neigh->arp_queue);
diff -urN linux-2.6.14-rc5/net/core/skbuff.c linux-2.6.14/net/core/skbuff.c
--- linux-2.6.14-rc5/net/core/skbuff.c	2005-10-27 18:17:18.860485759 -0700
+++ linux-2.6.14/net/core/skbuff.c	2005-10-27 18:17:25.846800493 -0700
@@ -410,6 +410,9 @@
 	C(nfct);
 	nf_conntrack_get(skb->nfct);
 	C(nfctinfo);
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+	C(ipvs_property);
+#endif
 #ifdef CONFIG_BRIDGE_NETFILTER
 	C(nf_bridge);
 	nf_bridge_get(skb->nf_bridge);
@@ -467,6 +470,9 @@
 	new->nfct	= old->nfct;
 	nf_conntrack_get(old->nfct);
 	new->nfctinfo	= old->nfctinfo;
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+	new->ipvs_property = old->ipvs_property;
+#endif
 #ifdef CONFIG_BRIDGE_NETFILTER
 	new->nf_bridge	= old->nf_bridge;
 	nf_bridge_get(old->nf_bridge);
diff -urN linux-2.6.14-rc5/net/core/wireless.c linux-2.6.14/net/core/wireless.c
--- linux-2.6.14-rc5/net/core/wireless.c	2005-10-27 18:17:18.863485895 -0700
+++ linux-2.6.14/net/core/wireless.c	2005-10-27 18:17:25.849800628 -0700
@@ -455,10 +455,15 @@
 
 	/* Old location, field to be removed in next WE */
 	if(dev->get_wireless_stats) {
-		printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n",
-		       dev->name);
+		static int printed_message;
+
+		if (!printed_message++)
+			printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n",
+				dev->name);
+
 		return dev->get_wireless_stats(dev);
 	}
+
 	/* Not found */
 	return (struct iw_statistics *) NULL;
 }
diff -urN linux-2.6.14-rc5/net/dccp/ipv4.c linux-2.6.14/net/dccp/ipv4.c
--- linux-2.6.14-rc5/net/dccp/ipv4.c	2005-10-27 18:17:18.875486435 -0700
+++ linux-2.6.14/net/dccp/ipv4.c	2005-10-27 18:17:25.861801168 -0700
@@ -463,6 +463,7 @@
 	if (skb != NULL) {
 		const struct inet_request_sock *ireq = inet_rsk(req);
 
+		memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 		err = ip_build_and_send_pkt(skb, sk, ireq->loc_addr,
 					    ireq->rmt_addr,
 					    ireq->opt);
@@ -647,6 +648,7 @@
 	if (skb != NULL) {
 		const struct inet_sock *inet = inet_sk(sk);
 
+		memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 		err = ip_build_and_send_pkt(skb, sk,
 					    inet->saddr, inet->daddr, NULL);
 		if (err == NET_XMIT_CN)
diff -urN linux-2.6.14-rc5/net/dccp/output.c linux-2.6.14/net/dccp/output.c
--- linux-2.6.14-rc5/net/dccp/output.c	2005-10-27 18:17:18.877486525 -0700
+++ linux-2.6.14/net/dccp/output.c	2005-10-27 18:17:25.863801258 -0700
@@ -62,10 +62,8 @@
 		
 		skb->h.raw = skb_push(skb, dccp_header_size);
 		dh = dccp_hdr(skb);
-		/*
-		 * Data packets are not cloned as they are never retransmitted
-		 */
-		if (skb_cloned(skb))
+
+		if (!skb->sk)
 			skb_set_owner_w(skb, sk);
 
 		/* Build DCCP header and checksum it. */
@@ -102,6 +100,7 @@
 
 		DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
 
+		memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 		err = ip_queue_xmit(skb, 0);
 		if (err <= 0)
 			return err;
@@ -243,7 +242,8 @@
 
 		err = dccp_transmit_skb(sk, skb);
 		ccid_hc_tx_packet_sent(dp->dccps_hc_tx_ccid, sk, 0, len);
-	}
+	} else
+		kfree_skb(skb);
 
 	return err;
 }
diff -urN linux-2.6.14-rc5/net/dccp/proto.c linux-2.6.14/net/dccp/proto.c
--- linux-2.6.14-rc5/net/dccp/proto.c	2005-10-27 18:17:18.879486615 -0700
+++ linux-2.6.14/net/dccp/proto.c	2005-10-27 18:17:25.864801303 -0700
@@ -402,8 +402,6 @@
 	 *     This bug was _quickly_ found & fixed by just looking at an OSTRA
 	 *     generated callgraph 8) -acme
 	 */
-	if (rc != 0)
-		goto out_discard;
 out_release:
 	release_sock(sk);
 	return rc ? : len;
diff -urN linux-2.6.14-rc5/net/ipv4/ip_output.c linux-2.6.14/net/ipv4/ip_output.c
--- linux-2.6.14-rc5/net/ipv4/ip_output.c	2005-10-27 18:17:18.913488147 -0700
+++ linux-2.6.14/net/ipv4/ip_output.c	2005-10-27 18:17:25.898802835 -0700
@@ -391,6 +391,9 @@
 	to->nfct = from->nfct;
 	nf_conntrack_get(to->nfct);
 	to->nfctinfo = from->nfctinfo;
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+	to->ipvs_property = from->ipvs_property;
+#endif
 #ifdef CONFIG_BRIDGE_NETFILTER
 	nf_bridge_put(to->nf_bridge);
 	to->nf_bridge = from->nf_bridge;
diff -urN linux-2.6.14-rc5/net/ipv4/tcp_input.c linux-2.6.14/net/ipv4/tcp_input.c
--- linux-2.6.14-rc5/net/ipv4/tcp_input.c	2005-10-27 18:17:18.963490400 -0700
+++ linux-2.6.14/net/ipv4/tcp_input.c	2005-10-27 18:17:25.948805088 -0700
@@ -2239,6 +2239,7 @@
 			/* Note, it is the only place, where
 			 * fast path is recovered for sending TCP.
 			 */
+			tp->pred_flags = 0;
 			tcp_fast_path_check(sk, tp);
 
 			if (nwin > tp->max_window) {
diff -urN linux-2.6.14-rc5/net/ipv4/tcp_output.c linux-2.6.14/net/ipv4/tcp_output.c
--- linux-2.6.14-rc5/net/ipv4/tcp_output.c	2005-10-27 18:17:18.971490760 -0700
+++ linux-2.6.14/net/ipv4/tcp_output.c	2005-10-27 18:17:25.955805403 -0700
@@ -435,17 +435,7 @@
 	int nsize, old_factor;
 	u16 flags;
 
-	if (unlikely(len >= skb->len)) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TCP: seg_size=%u, mss=%u, seq=%u, "
-			       "end_seq=%u, skb->len=%u.\n", len, mss_now,
-			       TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq,
-			       skb->len);
-			WARN_ON(1);
-		}
-		return 0;
-	}
-
+	BUG_ON(len > skb->len);
 	nsize = skb_headlen(skb) - len;
 	if (nsize < 0)
 		nsize = 0;
diff -urN linux-2.6.14-rc5/net/ipv6/ip6_flowlabel.c linux-2.6.14/net/ipv6/ip6_flowlabel.c
--- linux-2.6.14-rc5/net/ipv6/ip6_flowlabel.c	2005-10-27 18:17:18.982491256 -0700
+++ linux-2.6.14/net/ipv6/ip6_flowlabel.c	2005-10-27 18:17:25.966805899 -0700
@@ -483,7 +483,7 @@
 						goto done;
 					}
 					fl1 = sfl->fl;
-					atomic_inc(&fl->users);
+					atomic_inc(&fl1->users);
 					break;
 				}
 			}
diff -urN linux-2.6.14-rc5/net/sunrpc/svcsock.c linux-2.6.14/net/sunrpc/svcsock.c
--- linux-2.6.14-rc5/net/sunrpc/svcsock.c	2005-10-27 18:17:19.067495085 -0700
+++ linux-2.6.14/net/sunrpc/svcsock.c	2005-10-27 18:17:26.051809728 -0700
@@ -587,7 +587,7 @@
 		struct timeval tv;
 
 		tv.tv_sec = xtime.tv_sec;
-		tv.tv_usec = xtime.tv_nsec * 1000;
+		tv.tv_usec = xtime.tv_nsec / NSEC_PER_USEC;
 		skb_set_timestamp(skb, &tv);
 		/* Don't enable netstamp, sunrpc doesn't 
 		   need that much accuracy */
diff -urN linux-2.6.14-rc5/security/selinux/selinuxfs.c linux-2.6.14/security/selinux/selinuxfs.c
--- linux-2.6.14-rc5/security/selinux/selinuxfs.c	2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.14/security/selinux/selinuxfs.c	2005-10-27 18:17:26.082811125 -0700
@@ -879,7 +879,7 @@
 	if (sscanf(page, "%d", &new_value) != 1)
 		goto out;
 
-	if (new_value) {
+	if (new_value && bool_pending_values) {
 		security_set_bools(bool_num, bool_pending_values);
 	}
 
@@ -952,6 +952,7 @@
 
 	/* remove any existing files */
 	kfree(bool_pending_values);
+	bool_pending_values = NULL;
 
 	sel_remove_bools(dir);
 
@@ -1002,6 +1003,7 @@
 	}
 	return ret;
 err:
+	kfree(values);
 	d_genocide(dir);
 	ret = -ENOMEM;
 	goto out;
diff -urN linux-2.6.14-rc5/security/selinux/ss/policydb.c linux-2.6.14/security/selinux/ss/policydb.c
--- linux-2.6.14-rc5/security/selinux/ss/policydb.c	2005-10-27 18:17:19.102496662 -0700
+++ linux-2.6.14/security/selinux/ss/policydb.c	2005-10-27 18:17:26.086811305 -0700
@@ -650,8 +650,10 @@
 	}
 	if (lrt) kfree(lrt);
 
-	for (i = 0; i < p->p_types.nprim; i++)
-		ebitmap_destroy(&p->type_attr_map[i]);
+	if (p->type_attr_map) {
+		for (i = 0; i < p->p_types.nprim; i++)
+			ebitmap_destroy(&p->type_attr_map[i]);
+	}
 	kfree(p->type_attr_map);
 
 	return;
diff -urN linux-2.6.14-rc5/sound/core/init.c linux-2.6.14/sound/core/init.c
--- linux-2.6.14-rc5/sound/core/init.c	2005-10-27 18:17:19.109496977 -0700
+++ linux-2.6.14/sound/core/init.c	2005-10-27 18:17:26.093811620 -0700
@@ -828,7 +828,8 @@
 	card = get_snd_generic_card(dev);
 	if (card->power_state == SNDRV_CTL_POWER_D3hot)
 		return 0;
-	card->pm_suspend(card, PMSG_SUSPEND);
+	if (card->pm_suspend)
+		card->pm_suspend(card, PMSG_SUSPEND);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
 	return 0;
 }
@@ -843,7 +844,8 @@
 	card = get_snd_generic_card(dev);
 	if (card->power_state == SNDRV_CTL_POWER_D0)
 		return 0;
-	card->pm_resume(card);
+	if (card->pm_suspend)
+		card->pm_resume(card);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
 	return 0;
 }
