diff --git a/CREDITS b/CREDITS
index 6f50be3..9bf714a 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3241,14 +3241,9 @@ S: 12725 SW Millikan Way, Suite 400
 S: Beaverton, Oregon 97005
 S: USA
 
-N: Marcelo W. Tosatti
-E: marcelo.tosatti@cyclades.com
-D: Miscellaneous kernel hacker
+N: Marcelo Tosatti
+E: marcelo@kvack.org
 D: v2.4 kernel maintainer
-D: Current pc300/cyclades maintainer
-S: Cyclades Corporation
-S: Av Cristovao Colombo, 462. Floresta.
-S: Porto Alegre
 S: Brazil
 
 N: Stefan Traby
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 3c406ac..b369a8c 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -1721,11 +1721,6 @@ Your cooperation is appreciated.
 		These devices support the same API as the generic SCSI
 		devices.
 
- 97 block	Packet writing for CD/DVD devices
-		  0 = /dev/pktcdvd0	First packet-writing module
-		  1 = /dev/pktcdvd1	Second packet-writing module
-		    ...
-
  98 char	Control and Measurement Device (comedi)
 		  0 = /dev/comedi0	First comedi device
 		  1 = /dev/comedi1	Second comedi device
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 15fc8fb..4820366 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -259,9 +259,9 @@ sub dibusb {
 }
 
 sub nxt2002 {
-    my $sourcefile = "Broadband4PC_4_2_11.zip";
+    my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip";
     my $url = "http://www.bbti.us/download/windows/$sourcefile";
-    my $hash = "c6d2ea47a8f456d887ada0cfb718ff2a";
+    my $hash = "476befae8c7c1bb9648954060b1eec1f";
     my $outfile = "dvb-fe-nxt2002.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
 
@@ -269,8 +269,8 @@ sub nxt2002 {
 
     wgetfile($sourcefile, $url);
     unzip($sourcefile, $tmpdir);
-    verify("$tmpdir/SkyNETU.sys", $hash);
-    extract("$tmpdir/SkyNETU.sys", 375832, 5908, $outfile);
+    verify("$tmpdir/SkyNET.sys", $hash);
+    extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile);
 
     $outfile;
 }
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 421bcff..43ab119 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -57,6 +57,15 @@ Who:	Jody McIntyre <scjody@steamballoon.
 
 ---------------------------
 
+What:	sbp2: module parameter "force_inquiry_hack"
+When:	July 2006
+Why:	Superceded by parameter "workarounds". Both parameters are meant to be
+	used ad-hoc and for single devices only, i.e. not in modprobe.conf,
+	therefore the impact of this feature replacement should be low.
+Who:	Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+---------------------------
+
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:	July 2006
 Why:	V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index 43e836c..e9cc8bb 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -105,20 +105,3 @@
    on the setup, so I think that the choice on what firmware to make
    persistent should be left to userspace.
 
- - Why register_firmware()+__init can be useful:
- 	- For boot devices needing firmware.
-	- To make the transition easier:
-		The firmware can be declared __init and register_firmware()
-		called on module_init. Then the firmware is warranted to be
-		there even if "firmware hotplug userspace" is not there yet or
-		it doesn't yet provide the needed firmware.
-		Once the firmware is widely available in userspace, it can be
-		removed from the kernel. Or made optional (CONFIG_.*_FIRMWARE).
-
-	In either case, if firmware hotplug support is there, it can move the
-	firmware out of kernel memory into the real filesystem for later
-	usage.
-
-	Note: If persistence is implemented on top of initramfs,
-	register_firmware() may not be appropriate.
-
diff --git a/Documentation/firmware_class/firmware_sample_driver.c b/Documentation/firmware_class/firmware_sample_driver.c
index ad3edab..87feccd 100644
--- a/Documentation/firmware_class/firmware_sample_driver.c
+++ b/Documentation/firmware_class/firmware_sample_driver.c
@@ -5,8 +5,6 @@
  *
  * Sample code on how to use request_firmware() from drivers.
  *
- * Note that register_firmware() is currently useless.
- *
  */
 
 #include <linux/module.h>
@@ -17,11 +15,6 @@ #include <linux/string.h>
 
 #include "linux/firmware.h"
 
-#define WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-char __init inkernel_firmware[] = "let's say that this is firmware\n";
-#endif
-
 static struct device ghost_device = {
 	.bus_id    = "ghost0",
 };
@@ -104,10 +97,6 @@ static void sample_probe_async(void)
 
 static int sample_init(void)
 {
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-	register_firmware("sample_driver_fw", inkernel_firmware,
-			  sizeof(inkernel_firmware));
-#endif
 	device_initialize(&ghost_device);
 	/* since there is no real hardware insertion I just call the
 	 * sample probe functions here */
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 92f0056..c61d8b8 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -1031,7 +1031,7 @@ conflict on any particular lock.
 LOCKS VS MEMORY ACCESSES
 ------------------------
 
-Consider the following: the system has a pair of spinlocks (N) and (Q), and
+Consider the following: the system has a pair of spinlocks (M) and (Q), and
 three CPUs; then should the following sequence of events occur:
 
 	CPU 1				CPU 2
@@ -1678,7 +1678,7 @@ CPU's caches by some other cache event:
 	smp_wmb();
 	<A:modify v=2>	<C:busy>
 			<C:queue v=2>
-	p = &b;		q = p;
+	p = &v;		q = p;
 			<D:request p>
 	<B:modify p=&v>	<D:commit p=&v>
 		  	<D:read p>
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
new file mode 100644
index 0000000..9c45f3d
--- /dev/null
+++ b/Documentation/spi/pxa2xx
@@ -0,0 +1,234 @@
+﻿PXA2xx SPI on SSP driver HOWTO
+===================================================
+This a mini howto on the pxa2xx_spi driver.  The driver turns a PXA2xx
+synchronous serial port into a SPI master controller
+(see Documentation/spi/spi_summary). The driver has the following features
+
+- Support for any PXA2xx SSP
+- SSP PIO and SSP DMA data transfers.
+- External and Internal (SSPFRM) chip selects.
+- Per slave device (chip) configuration.
+- Full suspend, freeze, resume support.
+
+The driver is built around a "spi_message" fifo serviced by workqueue and a
+tasklet. The workqueue, "pump_messages", drives message fifo and the tasklet
+(pump_transfer) is responsible for queuing SPI transactions and setting up and
+launching the dma/interrupt driven transfers.
+
+Declaring PXA2xx Master Controllers
+-----------------------------------
+Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
+"platform device".  The master configuration is passed to the driver via a table
+found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+
+struct pxa2xx_spi_master {
+	enum pxa_ssp_type ssp_type;
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+The "pxa2xx_spi_master.ssp_type" field must have a value between 1 and 3 and
+informs the driver which features a particular SSP supports.
+
+The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the
+corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See
+the "PXA2xx Developer Manual" section "Clocks and Power Management".
+
+The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
+slave device (chips) attached to this SPI master.
+
+The "pxa2xx_spi_master.enable_dma" field informs the driver that SSP DMA should
+be used.  This caused the driver to acquire two DMA channels: rx_channel and
+tx_channel.  The rx_channel has a higher DMA service priority the tx_channel.
+See the "PXA2xx Developer Manual" section "DMA Controller".
+
+NSSP MASTER SAMPLE
+------------------
+Below is a sample configuration using the PXA255 NSSP.
+
+static struct resource pxa_spi_nssp_resources[] = {
+	[0] = {
+		.start	= __PREG(SSCR0_P(2)), /* Start address of NSSP */
+		.end	= __PREG(SSCR0_P(2)) + 0x2c, /* Range of registers */
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NSSP, /* NSSP IRQ */
+		.end	= IRQ_NSSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct pxa2xx_spi_master pxa_nssp_master_info = {
+	.ssp_type = PXA25x_NSSP, /* Type of SSP */
+	.clock_enable = CKEN9_NSSP, /* NSSP Peripheral clock */
+	.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
+	.enable_dma = 1, /* Enables NSSP DMA */
+};
+
+static struct platform_device pxa_spi_nssp = {
+	.name = "pxa2xx-spi", /* MUST BE THIS VALUE, so device match driver */
+	.id = 2, /* Bus number, MUST MATCH SSP number 1..n */
+	.resource = pxa_spi_nssp_resources,
+	.num_resources = ARRAY_SIZE(pxa_spi_nssp_resources),
+	.dev = {
+		.platform_data = &pxa_nssp_master_info, /* Passed to driver */
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&pxa_spi_nssp,
+};
+
+static void __init board_init(void)
+{
+	(void)platform_add_device(devices, ARRAY_SIZE(devices));
+}
+
+Declaring Slave Devices
+-----------------------
+Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c
+using the "spi_board_info" structure found in "linux/spi/spi.h". See
+"Documentation/spi/spi_summary" for additional information.
+
+Each slave device attached to the PXA must provide slave specific configuration
+information via the structure "pxa2xx_spi_chip" found in
+"include/asm-arm/arch-pxa/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+will uses the configuration whenever the driver communicates with the slave
+device.
+
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout_microsecs;
+	u8 enable_loopback;
+	void (*cs_control)(u32 command);
+};
+
+The "pxa2xx_spi_chip.tx_threshold" and "pxa2xx_spi_chip.rx_threshold" fields are
+used to configure the SSP hardware fifo.  These fields are critical to the
+performance of pxa2xx_spi driver and misconfiguration will result in rx
+fifo overruns (especially in PIO mode transfers). Good default values are
+
+	.tx_threshold = 12,
+	.rx_threshold = 4,
+
+The "pxa2xx_spi_chip.dma_burst_size" field is used to configure PXA2xx DMA
+engine and is related the "spi_device.bits_per_word" field.  Read and understand
+the PXA2xx "Developer Manual" sections on the DMA controller and SSP Controllers
+to determine the correct value. An SSP configured for byte-wide transfers would
+use a value of 8.
+
+The "pxa2xx_spi_chip.timeout_microsecs" fields is used to efficiently handle
+trailing bytes in the SSP receiver fifo.  The correct value for this field is
+dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific
+slave device.  Please note the the PXA2xx SSP 1 does not support trailing byte
+timeouts and must busy-wait any trailing bytes.
+
+The "pxa2xx_spi_chip.enable_loopback" field is used to place the SSP porting
+into internal loopback mode.  In this mode the SSP controller internally
+connects the SSPTX pin the the SSPRX pin.  This is useful for initial setup
+testing.
+
+The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific
+function for asserting/deasserting a slave device chip select.  If the field is
+NULL, the pxa2xx_spi master controller driver assumes that the SSP port is
+configured to use SSPFRM instead.
+
+NSSP SALVE SAMPLE
+-----------------
+The pxa2xx_spi_chip structure is passed to the pxa2xx_spi driver in the
+"spi_board_info.controller_data" field. Below is a sample configuration using
+the PXA255 NSSP.
+
+/* Chip Select control for the CS8415A SPI slave device */
+static void cs8415a_cs_control(u32 command)
+{
+	if (command & PXA2XX_CS_ASSERT)
+		GPCR(2) = GPIO_bit(2);
+	else
+		GPSR(2) = GPIO_bit(2);
+}
+
+/* Chip Select control for the CS8405A SPI slave device */
+static void cs8405a_cs_control(u32 command)
+{
+	if (command & PXA2XX_CS_ASSERT)
+		GPCR(3) = GPIO_bit(3);
+	else
+		GPSR(3) = GPIO_bit(3);
+}
+
+static struct pxa2xx_spi_chip cs8415a_chip_info = {
+	.tx_threshold = 12, /* SSP hardward FIFO threshold */
+	.rx_threshold = 4, /* SSP hardward FIFO threshold */
+	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
+	.timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+	.cs_control = cs8415a_cs_control, /* Use external chip select */
+};
+
+static struct pxa2xx_spi_chip cs8405a_chip_info = {
+	.tx_threshold = 12, /* SSP hardward FIFO threshold */
+	.rx_threshold = 4, /* SSP hardward FIFO threshold */
+	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
+	.timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+	.cs_control = cs8405a_cs_control, /* Use external chip select */
+};
+
+static struct spi_board_info streetracer_spi_board_info[] __initdata = {
+	{
+		.modalias = "cs8415a", /* Name of spi_driver for this device */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.bus_num = 2, /* Framework bus number */
+		.chip_select = 0, /* Framework chip select */
+		.platform_data = NULL; /* No spi_driver specific config */
+		.controller_data = &cs8415a_chip_info, /* Master chip config */
+		.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
+	},
+	{
+		.modalias = "cs8405a", /* Name of spi_driver for this device */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.bus_num = 2, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select */
+		.controller_data = &cs8405a_chip_info, /* Master chip config */
+		.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
+	},
+};
+
+static void __init streetracer_init(void)
+{
+	spi_register_board_info(streetracer_spi_board_info,
+				ARRAY_SIZE(streetracer_spi_board_info));
+}
+
+
+DMA and PIO I/O Support
+-----------------------
+The pxa2xx_spi driver support both DMA and interrupt driven PIO message
+transfers.  The driver defaults to PIO mode and DMA transfers must enabled by
+setting the "enable_dma" flag in the "pxa2xx_spi_master" structure and and
+ensuring that the "pxa2xx_spi_chip.dma_burst_size" field is non-zero.  The DMA
+mode support both coherent and stream based DMA mappings.
+
+The following logic is used to determine the type of I/O to be used on
+a per "spi_transfer" basis:
+
+if !enable_dma or dma_burst_size == 0 then
+	always use PIO transfers
+
+if spi_message.is_dma_mapped and rx_dma_buf != 0 and tx_dma_buf != 0 then
+	use coherent DMA mode
+
+if rx_buf and tx_buf are aligned on 8 byte boundary then
+	use streaming DMA mode
+
+otherwise
+	use PIO transfer
+
+THANKS TO
+---------
+
+David Brownell and others for mentoring the development of this driver.
+
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index a5ffba3..068732d 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -414,7 +414,33 @@ to get the driver-private data allocated
 The driver will initialize the fields of that spi_master, including the
 bus number (maybe the same as the platform device ID) and three methods
 used to interact with the SPI core and SPI protocol drivers.  It will
-also initialize its own internal state.
+also initialize its own internal state.  (See below about bus numbering
+and those methods.)
+
+After you initialize the spi_master, then use spi_register_master() to
+publish it to the rest of the system.  At that time, device nodes for
+the controller and any predeclared spi devices will be made available,
+and the driver model core will take care of binding them to drivers.
+
+If you need to remove your SPI controller driver, spi_unregister_master()
+will reverse the effect of spi_register_master().
+
+
+BUS NUMBERING
+
+Bus numbering is important, since that's how Linux identifies a given
+SPI bus (shared SCK, MOSI, MISO).  Valid bus numbers start at zero.  On
+SOC systems, the bus numbers should match the numbers defined by the chip
+manufacturer.  For example, hardware controller SPI2 would be bus number 2,
+and spi_board_info for devices connected to it would use that number.
+
+If you don't have such hardware-assigned bus number, and for some reason
+you can't just assign them, then provide a negative bus number.  That will
+then be replaced by a dynamically assigned number. You'd then need to treat
+this as a non-static configuration (see above).
+
+
+SPI MASTER METHODS
 
     master->setup(struct spi_device *spi)
 	This sets up the device clock rate, SPI mode, and word sizes.
@@ -431,6 +457,9 @@ also initialize its own internal state.
 	state it dynamically associates with that device.  If you do that,
 	be sure to provide the cleanup() method to free that state.
 
+
+SPI MESSAGE QUEUE
+
 The bulk of the driver will be managing the I/O queue fed by transfer().
 
 That queue could be purely conceptual.  For example, a driver used only
@@ -440,6 +469,9 @@ But the queue will probably be very real
 often DMA (especially if the root filesystem is in SPI flash), and
 execution contexts like IRQ handlers, tasklets, or workqueues (such
 as keventd).  Your driver can be as fancy, or as simple, as you need.
+Such a transfer() method would normally just add the message to a
+queue, and then start some asynchronous transfer engine (unless it's
+already running).
 
 
 THANKS TO
diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt
index c5beb54..21ed511 100644
--- a/Documentation/watchdog/watchdog-api.txt
+++ b/Documentation/watchdog/watchdog-api.txt
@@ -36,6 +36,9 @@ timeout or margin.  The simplest way to 
 some data to the device.  So a very simple watchdog daemon would look
 like this:
 
+#include <stdlib.h>
+#include <fcntl.h>
+
 int main(int argc, const char *argv[]) {
 	int fd=open("/dev/watchdog",O_WRONLY);
 	if (fd==-1) {
diff --git a/MAINTAINERS b/MAINTAINERS
index 5e33558..bd10b2a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -40,11 +40,20 @@ trivial patch so apply some common sense
 	PLEASE document known bugs. If it doesn't work for everything
 	or does something very odd once a month document it.
 
+	PLEASE remember that submissions must be made under the terms
+	of the OSDL certificate of contribution
+	(http://www.osdl.org/newsroom/press_releases/2004/2004_05_24_dco.html)
+	and should include a Signed-off-by: line.
+
 6.	Make sure you have the right to send any changes you make. If you
 	do changes at work you may find your employer owns the patch
 	not you.
 
-7.	Happy hacking.
+7.	When sending security related changes or reports to a maintainer
+	please Cc: security@kernel.org, especially if the maintainer
+	does not respond.
+
+8.	Happy hacking.
 
  		-----------------------------------
 
@@ -969,7 +978,7 @@ S:	Maintained
 EXT3 FILE SYSTEM
 P:	Stephen Tweedie, Andrew Morton
 M:	sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
-L:	ext3-users@redhat.com
+L:	ext2-devel@lists.sourceforge.net
 S:	Maintained
 
 F71805F HARDWARE MONITORING DRIVER
@@ -1530,12 +1539,28 @@ W:	http://jfs.sourceforge.net/
 T:	git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
 S:	Supported
 
+JOURNALLING LAYER FOR BLOCK DEVICS (JBD)
+P:	Stephen Tweedie, Andrew Morton
+M:	sct@redhat.com, akpm@osdl.org
+L:	ext2-devel@lists.sourceforge.net
+S:	Maintained
+
 KCONFIG
 P:	Roman Zippel
 M:	zippel@linux-m68k.org
 L:	kbuild-devel@lists.sourceforge.net
 S:	Maintained
 
+KDUMP
+P:	Vivek Goyal
+M:	vgoyal@in.ibm.com
+P:	Haren Myneni
+M:	hbabu@us.ibm.com
+L:	fastboot@lists.osdl.org
+L:	linux-kernel@vger.kernel.org
+W:	http://lse.sourceforge.net/kdump/
+S:	Maintained
+
 KERNEL AUTOMOUNTER (AUTOFS)
 P:	H. Peter Anvin
 M:	hpa@zytor.com
@@ -1603,6 +1628,11 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+LED SUBSYSTEM
+P:	Richard Purdie
+M:	rpurdie@rpsys.net
+S:	Maintained
+
 LEGO USB Tower driver
 P:	Juergen Stuber
 M:	starblue@users.sourceforge.net
@@ -1662,7 +1692,7 @@ S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
 P:	Marcelo Tosatti
-M:	marcelo.tosatti@cyclades.com
+M:	marcelo@kvack.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
@@ -2513,6 +2543,12 @@ M:	perex@suse.cz
 L:	alsa-devel@alsa-project.org
 S:	Maintained
 
+SPI SUBSYSTEM
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	spi-devel-general@lists.sourceforge.net
+S:	Maintained
+
 TPM DEVICE DRIVER
 P:	Kylene Hall
 M:	kjhall@us.ibm.com
diff --git a/Makefile b/Makefile
index 3494c17..81caa3e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 17
-EXTRAVERSION =-rc4
+EXTRAVERSION = -rc4-git12
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 45fdf4a..396efba 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -99,6 +99,8 @@ #endif
   DEFINE(MACHINFO_NAME,		offsetof(struct machine_desc, name));
   DEFINE(MACHINFO_PHYSIO,	offsetof(struct machine_desc, phys_io));
   DEFINE(MACHINFO_PGOFFIO,	offsetof(struct machine_desc, io_pg_offst));
+  BLANK();
+  DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
   DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
   DEFINE(PROCINFO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mmu_flags));
   return 0; 
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 0353276..0a3e9ad 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -143,12 +143,23 @@ static struct dma_ops isa_dma_ops = {
 	.residue	= isa_get_dma_residue,
 };
 
-static struct resource dma_resources[] = {
-	{ "dma1",		0x0000, 0x000f },
-	{ "dma low page", 	0x0080, 0x008f },
-	{ "dma2",		0x00c0, 0x00df },
-	{ "dma high page",	0x0480, 0x048f }
-};
+static struct resource dma_resources[] = { {
+	.name	= "dma1",
+	.start	= 0x0000,
+	.end	= 0x000f
+}, {
+	.name	= "dma low page",
+	.start	= 0x0080,
+	.end 	= 0x008f
+}, {
+	.name	= "dma2",
+	.start	= 0x00c0,
+	.end	= 0x00df
+}, {
+	.name	= "dma high page",
+	.start	= 0x0480,
+	.end	= 0x048f
+} };
 
 void __init isa_init_dma(dma_t *dma)
 {
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 1a1539e..7df6e1a 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -311,7 +311,7 @@ void free_thread_info(struct thread_info
 		struct thread_info_list *th = &get_cpu_var(thread_info_list);
 		if (th->nr < EXTRA_TASK_STRUCT) {
 			unsigned long *p = (unsigned long *)thread;
-			p[0] = th->head;
+			p[0] = (unsigned long)th->head;
 			th->head = p;
 			th->nr += 1;
 			put_cpu_var(thread_info_list);
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 3bdc8c6..16153c8 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -122,7 +122,7 @@ #define instr r4
 #define reg   r5
 #define stack r6
 
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
+.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, r8, lr}
 		mov	stack, r0
 		mov	instr, r1
 		mov	reg, #9
@@ -145,7 +145,7 @@ #define stack r6
 		adrne	r0, .Lcr
 		blne	printk
 		mov	r0, stack
-		LOADREGS(fd, sp!, {instr, reg, stack, r7, pc})
+		LOADREGS(fd, sp!, {instr, reg, stack, r7, r8, pc})
 
 .Lfp:		.asciz	" r%d = %08X%c"
 .Lcr:		.asciz	"\n"
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index ec9a1cd..58eef66 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -189,12 +189,12 @@ #endif
 	moveq	pc, lr
 
 	@ Division by 0:
-	str	lr, [sp, #-4]!
+	str	lr, [sp, #-8]!
 	bl	__div0
 
 	@ as wrong as it could be...
 	mov	yl, #0
 	mov	yh, #0
 	mov	xh, #0
-	ldr	pc, [sp], #4
+	ldr	pc, [sp], #8
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 98356f8..02e188d 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -95,7 +95,10 @@ static void __init mainstone_init_irq(vo
 	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
 		set_irq_chip(irq, &mainstone_irq_chip);
 		set_irq_handler(irq, do_level_IRQ);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
+		else
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_flags(MAINSTONE_IRQ(8), 0);
 	set_irq_flags(MAINSTONE_IRQ(12), 0);
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index d4a586e..693fb1e 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -137,8 +137,11 @@ static struct amba_device *amba_devs[] _
 static void __init gic_init_irq(void)
 {
 #ifdef CONFIG_REALVIEW_MPCORE
+	unsigned int pldctrl;
 	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ 0xd8);
+	pldctrl |= 0x00800000;	/* New irq mode */
+	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 #endif
 	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 832fb86..73de2ea 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
 	mrc	p15, 0, r5, c13, c0, 0	@ PID
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c2, c0, 0	@ auxiliary control register
-	mrc	p15, 0, r9, c1, c0, 0	@ control register
+	mrc	p15, 0, r8, c1, c0, 0	@ control register
 
 	stmia	r0, { r4 - r13 }
 
@@ -165,7 +164,6 @@ #endif /* CONFIG_DEBUG_RESUME */
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
 	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-	mcr	p15, 0, r8, c1, c1, 0		@ auxilliary control
 
 #ifdef CONFIG_DEBUG_RESUME
 	mov	r3, #'R'
@@ -173,7 +171,7 @@ #ifdef CONFIG_DEBUG_RESUME
 #endif
 
 	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
+	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
 	nop					@ second-to-last before mmu
 	mov	pc, r2				@ go back to virtual address
 
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 25e0ca3..c1f7180 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -141,7 +141,7 @@ __ioremap_pfn(unsigned long pfn, unsigne
  		return NULL;
  	addr = (unsigned long)area->addr;
  	if (remap_area_pages(addr, pfn, size, flags)) {
- 		vfree((void *)addr);
+ 		vunmap((void *)addr);
  		return NULL;
  	}
  	return (void __iomem *) (offset + (char *)addr);
@@ -173,7 +173,7 @@ EXPORT_SYMBOL(__ioremap);
 
 void __iounmap(void __iomem *addr)
 {
-	vfree((void *) (PAGE_MASK & (unsigned long) addr));
+	vunmap((void *)(PAGE_MASK & (unsigned long)addr));
 }
 EXPORT_SYMBOL(__iounmap);
 
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index c6fe99e..8dfa305 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -758,10 +758,10 @@ config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
 	---help---
-	  Say Y here to experiment with turning CPUs off and on.  CPUs
-	  can be controlled through /sys/devices/system/cpu.
+	  Say Y here to experiment with turning CPUs off and on, and to
+	  enable suspend on SMP systems. CPUs can be controlled through
+	  /sys/devices/system/cpu.
 
-	  Say N.
 
 endmenu
 
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 40e5aba..daee695 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -1066,6 +1066,14 @@ static struct dmi_system_id __initdata a
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	{
+	 .callback = disable_acpi_pci,
+	 .ident = "HP xw9300",
+	 .matches = {
+		    DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		    DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
+		    },
+	},
 	{}
 };
 
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 013b85d..3d4b2f3 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -1341,6 +1341,14 @@ int __init APIC_init_uniprocessor (void)
 
 	connect_bsp_APIC();
 
+	/*
+	 * Hack: In case of kdump, after a crash, kernel might be booting
+	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+	 * might be zero if read from MP tables. Get it from LAPIC.
+	 */
+#ifdef CONFIG_CRASH_DUMP
+	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+#endif
 	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
 
 	setup_local_APIC();
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index d77e89a..846e163 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -1320,6 +1320,8 @@ legacy_init_iomem_resources(struct resou
 	probe_roms();
 	for (i = 0; i < e820.nr_map; i++) {
 		struct resource *res;
+		if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
+			continue;
 		res = kzalloc(sizeof(struct resource), GFP_ATOMIC);
 		switch (e820.map[i].type) {
 		case E820_RAM:	res->name = "System RAM"; break;
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 2d22f57..0e49836 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -130,9 +130,8 @@ #endif
 	print_symbol("%s", addr);
 
 	printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS;
-
 	if (printed)
-		printk("  ");
+		printk(" ");
 	else
 		printk("\n");
 
@@ -212,7 +211,6 @@ static void show_stack_log_lvl(struct ta
 	}
 
 	stack = esp;
-	printk(log_lvl);
 	for(i = 0; i < kstack_depth_to_print; i++) {
 		if (kstack_end(stack))
 			break;
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index ae6534a..3df1371 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -651,7 +651,7 @@ #endif
  * Specifically, in the case of x86, we will always add
  * memory to the highmem for now.
  */
-#ifdef CONFIG_HOTPLUG_MEMORY
+#ifdef CONFIG_MEMORY_HOTPLUG
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 int add_memory(u64 start, u64 size)
 {
diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c
index 1a2076c..ec0fd3c 100644
--- a/arch/i386/oprofile/nmi_int.c
+++ b/arch/i386/oprofile/nmi_int.c
@@ -332,10 +332,11 @@ static int __init ppro_init(char ** cpu_
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (cpu_model > 0xd)
+	if (cpu_model == 14)
+		*cpu_type = "i386/core";
+	else if (cpu_model > 0xd)
 		return 0;
-
-	if (cpu_model == 9) {
+	else if (cpu_model == 9) {
 		*cpu_type = "i386/p6_mobile";
 	} else if (cpu_model > 5) {
 		*cpu_type = "i386/piii";
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index 50a0bef..79b2370 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -92,7 +92,7 @@ void __restore_processor_state(struct sa
 	write_cr4(ctxt->cr4);
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
-	write_cr2(ctxt->cr0);
+	write_cr0(ctxt->cr0);
 
 	/*
 	 * now restore the descriptor tables to their proper values
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index f6a8853..9ea3539 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -134,7 +134,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=8
+CONFIG_NODES_SHIFT=10
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
@@ -1159,7 +1159,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 7956eb9..d58c1c5 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -416,7 +416,7 @@ iosapic_end_level_irq (unsigned int irq)
 	ia64_vector vec = irq_to_vector(irq);
 	struct iosapic_rte_info *rte;
 
-	move_irq(irq);
+	move_native_irq(irq);
 	list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list)
 		iosapic_eoi(rte->addr, vec);
 }
@@ -458,7 +458,7 @@ iosapic_ack_edge_irq (unsigned int irq)
 {
 	irq_desc_t *idesc = irq_descp(irq);
 
-	move_irq(irq);
+	move_native_irq(irq);
 	/*
 	 * Once we have recorded IRQ_PENDING already, we can mask the
 	 * interrupt for real. This prevents IRQ storms from unhandled
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 5ce908e..9c72ea3 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -101,7 +101,6 @@ void set_irq_affinity_info (unsigned int
 
 	if (irq < NR_IRQS) {
 		irq_affinity[irq] = mask;
-		set_irq_info(irq, mask);
 		irq_redir[irq] = (char) (redir & 0xff);
 	}
 }
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 078fb55..2d80653 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1636,7 +1636,7 @@ #ifdef CONFIG_PPC64
 			   compat, sizeof(compat)-1);
 	if (len <= 0)
 		return PLATFORM_GENERIC;
-	if (strncmp(compat, RELOC("chrp"), 4))
+	if (strcmp(compat, RELOC("chrp")))
 		return PLATFORM_GENERIC;
 
 	/* Default to pSeries. We need to know if we are running LPAR */
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index cf56a1d..26ed1f5 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -338,6 +338,8 @@ SYSCALL(symlinkat)
 SYSCALL(readlinkat)
 SYSCALL(fchmodat)
 SYSCALL(faccessat)
+COMPAT_SYS(get_robust_list)
+COMPAT_SYS(set_robust_list)
 
 /*
  * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 95b3643..b47fcc5 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -258,6 +258,7 @@ void *spu_syscall_table[] = {
 	[__NR_futex]			sys_futex,
 	[__NR_sched_setaffinity]	sys_sched_setaffinity,
 	[__NR_sched_getaffinity]	sys_sched_getaffinity,
+	[224]				sys_ni_syscall,
 	[__NR_tuxcall]			sys_ni_syscall,
 	[226]				sys_ni_syscall,
 	[__NR_io_setup]			sys_io_setup,
@@ -332,19 +333,21 @@ void *spu_syscall_table[] = {
 	[__NR_readlinkat]		sys_readlinkat,
 	[__NR_fchmodat]			sys_fchmodat,
 	[__NR_faccessat]		sys_faccessat,
+	[__NR_get_robust_list]		sys_get_robust_list,
+	[__NR_set_robust_list]		sys_set_robust_list,
 };
 
 long spu_sys_callback(struct spu_syscall_block *s)
 {
 	long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
 
-	syscall = spu_syscall_table[s->nr_ret];
-
 	if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
 		pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
 		return -ENOSYS;
 	}
 
+	syscall = spu_syscall_table[s->nr_ret];
+
 #ifdef DEBUG
 	print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall);
 	printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n",
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 5eb55ef..5f79f01 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -255,7 +255,7 @@ static int __init pSeries_init_panel(voi
 {
 	/* Manually leave the kernel version on the panel. */
 	ppc_md.progress("Linux ppc64\n", 0);
-	ppc_md.progress(system_utsname.version, 0);
+	ppc_md.progress(system_utsname.release, 0);
 
 	return 0;
 }
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index ef5b9c4..4d53b27 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1650,3 +1650,11 @@ sys_tee_wrapper:
 	llgfr	%r4,%r4			# size_t
 	llgfr	%r5,%r5			# unsigned int
 	jg	sys_tee
+
+	.globl compat_sys_vmsplice_wrapper
+compat_sys_vmsplice_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned int
+	llgfr	%r5,%r5			# unsigned int
+	jg	compat_sys_vmsplice
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index fc2c076..93be1d5 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -317,3 +317,4 @@ SYSCALL(sys_get_robust_list,sys_get_robu
 SYSCALL(sys_splice,sys_splice,sys_splice_wrapper)
 SYSCALL(sys_sync_file_range,sys_sync_file_range,sys_sync_file_range_wrapper)
 SYSCALL(sys_tee,sys_tee,sys_tee_wrapper)
+SYSCALL(sys_vmsplice,sys_vmsplice,compat_sys_vmsplice_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index fea043b..ce19ad4 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -249,18 +249,19 @@ static inline void stop_hz_timer(void)
 	unsigned long flags;
 	unsigned long seq, next;
 	__u64 timer, todval;
+	int cpu = smp_processor_id();
 
 	if (sysctl_hz_timer != 0)
 		return;
 
-	cpu_set(smp_processor_id(), nohz_cpu_mask);
+	cpu_set(cpu, nohz_cpu_mask);
 
 	/*
 	 * Leave the clock comparator set up for the next timer
 	 * tick if either rcu or a softirq is pending.
 	 */
-	if (rcu_pending(smp_processor_id()) || local_softirq_pending()) {
-		cpu_clear(smp_processor_id(), nohz_cpu_mask);
+	if (rcu_needs_cpu(cpu) || local_softirq_pending()) {
+		cpu_clear(cpu, nohz_cpu_mask);
 		return;
 	}
 
@@ -271,7 +272,7 @@ static inline void stop_hz_timer(void)
 	next = next_timer_interrupt();
 	do {
 		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		timer = (__u64)(next - jiffies) + jiffies_64;
+		timer = (__u64 next) - (__u64 jiffies) + jiffies_64;
 	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 	todval = -1ULL;
 	/* Be careful about overflows. */
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 460f72e..f9ff297 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -274,6 +274,11 @@ void *sbus_alloc_consistent(struct sbus_
 	if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0)
 		goto err_noiommu;
 
+	/* Set the resource name, if known. */
+	if (sdev) {
+		res->name = sdev->prom_name;
+	}
+
 	return (void *)res->start;
 
 err_noiommu:
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 787d5f1..598682f 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -113,6 +113,7 @@ int apply_relocate_add(Elf32_Shdr *sechd
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 		case R_SPARC_32:
+		case R_SPARC_UA32:
 			location[0] = v >> 24;
 			location[1] = v >> 16;
 			location[2] = v >>  8;
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index ec1c968..4b376fa 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -251,19 +251,9 @@ EXPORT_SYMBOL(__prom_getchild);
 EXPORT_SYMBOL(__prom_getsibling);
 
 /* sparc library symbols */
-EXPORT_SYMBOL(memchr);
 EXPORT_SYMBOL(memscan);
 EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strcmp);
 EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
 EXPORT_SYMBOL(page_kernel);
 
 /* Special internal versions of library functions. */
@@ -317,6 +307,3 @@ #endif
 
 /* Sun Power Management Idle Handler */
 EXPORT_SYMBOL(pm_idle);
-
-/* Binfmt_misc needs this */
-EXPORT_SYMBOL(sys_close);
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 6e1135c..2856551 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -79,6 +79,7 @@ sys_call_table:
 /*285*/	.long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
 /*290*/	.long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 /*295*/	.long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/	.long sys_set_robust_list, sys_get_robust_list
 
 #ifdef CONFIG_SUNOS_EMUL
 	/* Now the SunOS syscall table. */
@@ -190,6 +191,6 @@ sunos_sys_table:
 /*290*/	.long sunos_nosys, sunos_nosys, sunos_nosys
 	.long sunos_nosys, sunos_nosys, sunos_nosys
 	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
+	.long sunos_nosys, sunos_nosys, sunos_nosys
 
 #endif
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 1317380..f09a70b 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Sun Apr  2 19:31:04 2006
+# Linux kernel version: 2.6.17-rc3
+# Fri May 12 12:43:49 2006
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -114,6 +114,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_HUGETLB_PAGE_SIZE_4MB=y
 # CONFIG_HUGETLB_PAGE_SIZE_512K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_LARGE_ALLOCS=y
@@ -430,7 +431,6 @@ # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLOGICPTI is not set
 # CONFIG_SCSI_QLA_FC is not set
@@ -1042,9 +1042,7 @@ # CONFIG_USB_WACOM is not set
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1115,6 +1113,14 @@ #
 # CONFIG_NEW_LEDS is not set
 
 #
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
@@ -1303,6 +1309,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/sparc64/kernel/module.c b/arch/sparc64/kernel/module.c
index 6c83e37..5798715 100644
--- a/arch/sparc64/kernel/module.c
+++ b/arch/sparc64/kernel/module.c
@@ -143,6 +143,11 @@ int apply_relocate_add(Elf64_Shdr *sechd
 			location[3] = v >>  0;
 			break;
 
+		case R_SPARC_DISP32:
+			v -= (Elf64_Addr) location;
+			*loc32 = v;
+			break;
+
 		case R_SPARC_WDISP30:
 			v -= (Elf64_Addr) location;
 			*loc32 = (*loc32 & ~0x3fffffff) |
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 8efbc13..82e5455 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -218,7 +218,7 @@ static inline void iommu_free_ctx(struct
  * DMA for PCI device PDEV.  Return non-NULL cpu-side address if
  * successful and set *DMA_ADDRP to the PCI side dma address.
  */
-static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
@@ -232,7 +232,7 @@ static void *pci_4u_alloc_consistent(str
 	if (order >= 10)
 		return NULL;
 
-	first_page = __get_free_pages(GFP_ATOMIC, order);
+	first_page = __get_free_pages(gfp, order);
 	if (first_page == 0UL)
 		return NULL;
 	memset((char *)first_page, 0, PAGE_SIZE << order);
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index 9e94db2..2b7a1f3 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -154,7 +154,7 @@ static void pci_arena_free(struct pci_io
 		__clear_bit(i, arena->map);
 }
 
-static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
@@ -169,7 +169,7 @@ static void *pci_4v_alloc_consistent(str
 
 	npages = size >> IO_PAGE_SHIFT;
 
-	first_page = __get_free_pages(GFP_ATOMIC, order);
+	first_page = __get_free_pages(gfp, order);
 	if (unlikely(first_page == 0UL))
 		return NULL;
 
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index d4b39cd..1136fc4 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -78,8 +78,9 @@ sys_call_table32:
 	.word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid
 /*280*/	.word sys32_tee, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
-/*285*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
+/*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list
 
 #endif /* CONFIG_COMPAT */
 
@@ -147,8 +148,9 @@ sys_call_table:
 	.word sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
 /*280*/	.word sys_tee, sys_add_key, sys_request_key, sys_keyctl, sys_openat
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
-/*285*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/	.word sys_set_robust_list, sys_get_robust_list
 
 #if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
     defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -261,5 +263,5 @@ sunos_sys_table:
 /*290*/	.word sunos_nosys, sunos_nosys, sunos_nosys
 	.word sunos_nosys, sunos_nosys, sunos_nosys
 	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
+	.word sunos_nosys, sunos_nosys, sunos_nosys
 #endif
diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c
index 1eaa5da..fa1d19c 100644
--- a/arch/x86_64/kernel/kprobes.c
+++ b/arch/x86_64/kernel/kprobes.c
@@ -514,13 +514,13 @@ static void __kprobes resume_execution(s
 		*tos = orig_rip + (*tos - copy_rip);
 		break;
 	case 0xff:
-		if ((*insn & 0x30) == 0x10) {
+		if ((insn[1] & 0x30) == 0x10) {
 			/* call absolute, indirect */
 			/* Fix return addr; rip is correct. */
 			next_rip = regs->rip;
 			*tos = orig_rip + (*tos - copy_rip);
-		} else if (((*insn & 0x31) == 0x20) ||	/* jmp near, absolute indirect */
-			   ((*insn & 0x31) == 0x21)) {	/* jmp far, absolute indirect */
+		} else if (((insn[1] & 0x31) == 0x20) ||	/* jmp near, absolute indirect */
+			   ((insn[1] & 0x31) == 0x21)) {	/* jmp far, absolute indirect */
 			/* rip is correct. */
 			next_rip = regs->rip;
 		}
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index 44adcc2..1f6ecc6 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -12,9 +12,10 @@ static int
 check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
 {
         if (hwdev && bus + size > *hwdev->dma_mask) {
-		printk(KERN_ERR
-		    "nommu_%s: overflow %Lx+%lu of device mask %Lx\n",
-	       name, (long long)bus, size, (long long)*hwdev->dma_mask);
+		if (*hwdev->dma_mask >= 0xffffffffULL)
+			printk(KERN_ERR
+			    "nommu_%s: overflow %Lx+%lu of device mask %Lx\n",
+	       			name, (long long)bus, size, (long long)*hwdev->dma_mask);
 		return 0;
 	}
 	return 1;
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 6b87268..cea335e 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -102,6 +102,8 @@ static inline void preempt_conditional_c
 {
 	if (regs->eflags & X86_EFLAGS_IF)
 		local_irq_disable();
+	/* Make sure to not schedule here because we could be running
+	   on an exception stack. */
 	preempt_enable_no_resched();
 }
 
@@ -483,8 +485,6 @@ static void __kprobes do_trap(int trapnr
 {
 	struct task_struct *tsk = current;
 
-	conditional_sti(regs);
-
 	tsk->thread.error_code = error_code;
 	tsk->thread.trap_no = trapnr;
 
@@ -521,6 +521,7 @@ asmlinkage void do_##name(struct pt_regs
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
 							== NOTIFY_STOP) \
 		return; \
+	conditional_sti(regs);						\
 	do_trap(trapnr, signr, str, regs, error_code, NULL); \
 }
 
@@ -535,6 +536,7 @@ asmlinkage void do_##name(struct pt_regs
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
 							== NOTIFY_STOP) \
 		return; \
+	conditional_sti(regs);						\
 	do_trap(trapnr, signr, str, regs, error_code, &info); \
 }
 
@@ -548,7 +550,17 @@ DO_ERROR(10, SIGSEGV, "invalid TSS", inv
 DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
 DO_ERROR(18, SIGSEGV, "reserved", reserved)
-DO_ERROR(12, SIGBUS,  "stack segment", stack_segment)
+
+/* Runs on IST stack */
+asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
+{
+	if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
+			12, SIGBUS) == NOTIFY_STOP)
+		return;
+	preempt_conditional_sti(regs);
+	do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
+	preempt_conditional_cli(regs);
+}
 
 asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
 {
@@ -682,8 +694,9 @@ asmlinkage void __kprobes do_int3(struct
 	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) {
 		return;
 	}
+	preempt_conditional_sti(regs);
 	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
-	return;
+	preempt_conditional_cli(regs);
 }
 
 /* Help handler running on IST stack to switch back to user stack
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 15ae9fc..e151353 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -34,7 +34,10 @@ static nodemask_t nodes_found __initdata
 static struct bootnode nodes[MAX_NUMNODES] __initdata;
 static struct bootnode nodes_add[MAX_NUMNODES] __initdata;
 static int found_add_area __initdata;
-int hotadd_percent __initdata = 10;
+int hotadd_percent __initdata = 0;
+#ifndef RESERVE_HOTADD
+#define hotadd_percent 0	/* Ignore all settings */
+#endif
 static u8 pxm2node[256] = { [0 ... 255] = 0xff };
 
 /* Too small nodes confuse the VM badly. Usually they result
@@ -103,6 +106,7 @@ static __init void bad_srat(void)
 	int i;
 	printk(KERN_ERR "SRAT: SRAT not used.\n");
 	acpi_numa = -1;
+	found_add_area = 0;
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		apicid_to_node[i] = NUMA_NO_NODE;
 	for (i = 0; i < MAX_NUMNODES; i++)
@@ -154,7 +158,8 @@ acpi_numa_processor_affinity_init(struct
 	int pxm, node;
 	if (srat_disabled())
 		return;
-	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {		bad_srat();
+	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {
+		bad_srat();
 		return;
 	}
 	if (pa->flags.enabled == 0)
@@ -191,15 +196,17 @@ static int hotadd_enough_memory(struct b
 	allowed = (end_pfn - e820_hole_size(0, end_pfn)) * PAGE_SIZE;
 	allowed = (allowed / 100) * hotadd_percent;
 	if (allocated + mem > allowed) {
+		unsigned long range;
 		/* Give them at least part of their hotadd memory upto hotadd_percent
 		   It would be better to spread the limit out
 		   over multiple hotplug areas, but that is too complicated
 		   right now */
 		if (allocated >= allowed)
 			return 0;
-		pages = (allowed - allocated + mem) / sizeof(struct page);
+		range = allowed - allocated;
+		pages = (range / PAGE_SIZE);
 		mem = pages * sizeof(struct page);
-		nd->end = nd->start + pages*PAGE_SIZE;
+		nd->end = nd->start + range;
 	}
 	/* Not completely fool proof, but a good sanity check */
 	addr = find_e820_area(last_area_end, end_pfn<<PAGE_SHIFT, mem);
diff --git a/block/genhd.c b/block/genhd.c
index d965725..5a8d3bf 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -182,7 +182,6 @@ static int exact_lock(dev_t dev, void *d
  */
 void add_disk(struct gendisk *disk)
 {
-	get_device(disk->driverfs_dev);
 	disk->flags |= GENHD_FL_UP;
 	blk_register_region(MKDEV(disk->major, disk->first_minor),
 			    disk->minors, NULL, exact_match, exact_lock, disk);
@@ -428,7 +427,6 @@ static struct attribute * default_attrs[
 static void disk_release(struct kobject * kobj)
 {
 	struct gendisk *disk = to_disk(kobj);
-	put_device(disk->driverfs_dev);
 	kfree(disk->random);
 	kfree(disk->part);
 	free_disk_stats(disk);
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index eac48be..7eb36c5 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -3452,7 +3452,12 @@ void end_that_request_last(struct reques
 	if (unlikely(laptop_mode) && blk_fs_request(req))
 		laptop_io_completion();
 
-	if (disk && blk_fs_request(req)) {
+	/*
+	 * Account IO completion.  bar_rq isn't accounted as a normal
+	 * IO on queueing nor completion.  Accounting the containing
+	 * request is enough.
+	 */
+	if (disk && blk_fs_request(req) && req != &req->q->bar_rq) {
 		unsigned long duration = jiffies - req->start_time;
 		const int rw = rq_data_dir(req);
 
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 4723182..0c99ae6 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -86,18 +86,9 @@ firmware_timeout_store(struct class *cla
 static CLASS_ATTR(timeout, 0644, firmware_timeout_show, firmware_timeout_store);
 
 static void  fw_class_dev_release(struct class_device *class_dev);
-int firmware_class_uevent(struct class_device *dev, char **envp,
-			   int num_envp, char *buffer, int buffer_size);
 
-static struct class firmware_class = {
-	.name		= "firmware",
-	.uevent	= firmware_class_uevent,
-	.release	= fw_class_dev_release,
-};
-
-int
-firmware_class_uevent(struct class_device *class_dev, char **envp,
-		       int num_envp, char *buffer, int buffer_size)
+static int firmware_class_uevent(struct class_device *class_dev, char **envp,
+				 int num_envp, char *buffer, int buffer_size)
 {
 	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
 	int i = 0, len = 0;
@@ -116,6 +107,12 @@ firmware_class_uevent(struct class_devic
 	return 0;
 }
 
+static struct class firmware_class = {
+	.name		= "firmware",
+	.uevent		= firmware_class_uevent,
+	.release	= fw_class_dev_release,
+};
+
 static ssize_t
 firmware_loading_show(struct class_device *class_dev, char *buf)
 {
@@ -493,25 +490,6 @@ release_firmware(const struct firmware *
 	}
 }
 
-/**
- * register_firmware: - provide a firmware image for later usage
- * @name: name of firmware image file
- * @data: buffer pointer for the firmware image
- * @size: size of the data buffer area
- *
- *	Make sure that @data will be available by requesting firmware @name.
- *
- *	Note: This will not be possible until some kind of persistence
- *	is available.
- **/
-void
-register_firmware(const char *name, const u8 *data, size_t size)
-{
-	/* This is meaningless without firmware caching, so until we
-	 * decide if firmware caching is reasonable just leave it as a
-	 * noop */
-}
-
 /* Async support */
 struct firmware_work {
 	struct work_struct work;
@@ -630,4 +608,3 @@ module_exit(firmware_class_exit);
 EXPORT_SYMBOL(release_firmware);
 EXPORT_SYMBOL(request_firmware);
 EXPORT_SYMBOL(request_firmware_nowait);
-EXPORT_SYMBOL(register_firmware);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index f73446f..c688c25 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -536,6 +536,9 @@ static void ub_cleanup(struct ub_dev *sc
 		kfree(lun);
 	}
 
+	usb_set_intfdata(sc->intf, NULL);
+	usb_put_intf(sc->intf);
+	usb_put_dev(sc->dev);
 	kfree(sc);
 }
 
@@ -2221,7 +2224,12 @@ static int ub_probe(struct usb_interface
 	// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 	usb_set_intfdata(intf, sc);
 	usb_get_dev(sc->dev);
-	// usb_get_intf(sc->intf);	/* Do we need this? */
+	/*
+	 * Since we give the interface struct to the block level through
+	 * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
+	 * oopses on close after a disconnect (kernels 2.6.16 and up).
+	 */
+	usb_get_intf(sc->intf);
 
 	snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
 	    sc->dev->bus->busnum, sc->dev->devnum);
@@ -2286,7 +2294,7 @@ #endif
 
 err_dev_desc:
 	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
+	usb_put_intf(sc->intf);
 	usb_put_dev(sc->dev);
 	kfree(sc);
 err_core:
@@ -2461,12 +2469,6 @@ static void ub_disconnect(struct usb_int
 	 * and no URBs left in transit.
 	 */
 
-	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
-	sc->intf = NULL;
-	usb_put_dev(sc->dev);
-	sc->dev = NULL;
-
 	ub_put(sc);
 }
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4022966..78d928f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -291,7 +291,7 @@ config SX
 
 config RIO
 	tristate "Specialix RIO system support"
-	depends on SERIAL_NONSTANDARD && !64BIT
+	depends on SERIAL_NONSTANDARD
 	help
 	  This is a driver for the Specialix RIO, a smart serial card which
 	  drives an outboard box that can support up to 128 ports.  Product
diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h
index 3ec73d1..179cdbe 100644
--- a/drivers/char/rio/host.h
+++ b/drivers/char/rio/host.h
@@ -33,12 +33,6 @@
 #ifndef __rio_host_h__
 #define __rio_host_h__
 
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_host_h_sccs_ = "@(#)host.h	1.2";
-#endif
-#endif
-
 /*
 ** the host structure - one per host card in the system.
 */
@@ -77,9 +71,6 @@ #define RC_WAITING            0
 #define RC_STARTUP            1
 #define RC_RUNNING            2
 #define RC_STUFFED            3
-#define RC_SOMETHING          4
-#define RC_SOMETHING_NEW      5
-#define RC_SOMETHING_ELSE     6
 #define RC_READY              7
 #define RUN_STATE             7
 /*
diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c
index acda932..290143a 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/char/rio/rioboot.c
@@ -34,6 +34,7 @@ #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/termios.h>
 #include <linux/serial.h>
+#include <linux/vmalloc.h>
 #include <asm/semaphore.h>
 #include <linux/generic_serial.h>
 #include <linux/errno.h>
diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c
index d31aba6..75b2557 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@@ -1394,14 +1394,17 @@ int RIOPreemptiveCmd(struct rio_info *p,
 		return RIO_FAIL;
 	}
 
-	if (((int) ((char) PortP->InUse) == -1) || !(CmdBlkP = RIOGetCmdBlk())) {
-		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block for command %d on port %d\n", Cmd, PortP->PortNum);
+	if ((PortP->InUse == (typeof(PortP->InUse))-1) ||
+			!(CmdBlkP = RIOGetCmdBlk())) {
+		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block "
+			"for command %d on port %d\n", Cmd, PortP->PortNum);
 		return RIO_FAIL;
 	}
 
-	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", CmdBlkP, PortP->InUse);
+	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n",
+			CmdBlkP, PortP->InUse);
 
-	PktCmdP = (struct PktCmd_M *) &CmdBlkP->Packet.data[0];
+	PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0];
 
 	CmdBlkP->Packet.src_unit = 0;
 	if (PortP->SecondBlock)
@@ -1425,38 +1428,46 @@ int RIOPreemptiveCmd(struct rio_info *p,
 
 	switch (Cmd) {
 	case MEMDUMP:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p (addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p "
+				"(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
 		PktCmdP->SubCommand = MEMDUMP;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case FCLOSE:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n",
+				CmdBlkP);
 		break;
 	case READ_REGISTER:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) "
+				"command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
 		PktCmdP->SubCommand = READ_REGISTER;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case RESUME:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n",
+				CmdBlkP);
 		break;
 	case RFLUSH:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n",
+				CmdBlkP);
 		CmdBlkP->PostFuncP = RIORFlushEnable;
 		break;
 	case SUSPEND:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n",
+				CmdBlkP);
 		break;
 
 	case MGET:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n",
+				CmdBlkP);
 		break;
 
 	case MSET:
 	case MBIC:
 	case MBIS:
 		CmdBlkP->Packet.data[4] = (char) PortP->ModemLines;
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command "
+				"blk %p\n", CmdBlkP);
 		break;
 
 	case WFLUSH:
@@ -1465,12 +1476,14 @@ int RIOPreemptiveCmd(struct rio_info *p,
 		 ** allowed then we should not bother sending any more to the
 		 ** RTA.
 		 */
-		if ((int) ((char) PortP->WflushFlag) == (int) -1) {
-			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, WflushFlag about to wrap!");
+		if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) {
+			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, "
+					"WflushFlag about to wrap!");
 			RIOFreeCmdBlk(CmdBlkP);
 			return (RIO_FAIL);
 		} else {
-			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command blk %p\n", CmdBlkP);
+			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command "
+					"blk %p\n", CmdBlkP);
 			CmdBlkP->PostFuncP = RIOWFlushMark;
 		}
 		break;
diff --git a/drivers/char/rio/rioioctl.h b/drivers/char/rio/rioioctl.h
index 14b83fa..e8af5b3 100644
--- a/drivers/char/rio/rioioctl.h
+++ b/drivers/char/rio/rioioctl.h
@@ -33,10 +33,6 @@
 #ifndef	__rioioctl_h__
 #define	__rioioctl_h__
 
-#ifdef SCCS_LABELS
-static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
-#endif
-
 /*
 ** RIO device driver - user ioctls and associated structures.
 */
@@ -44,55 +40,13 @@ #endif
 struct portStats {
 	int port;
 	int gather;
-	ulong txchars;
-	ulong rxchars;
-	ulong opens;
-	ulong closes;
-	ulong ioctls;
+	unsigned long txchars;
+	unsigned long rxchars;
+	unsigned long opens;
+	unsigned long closes;
+	unsigned long ioctls;
 };
 
-
-#define rIOC	('r'<<8)
-#define	TCRIOSTATE	(rIOC | 1)
-#define	TCRIOXPON	(rIOC | 2)
-#define	TCRIOXPOFF	(rIOC | 3)
-#define	TCRIOXPCPS	(rIOC | 4)
-#define	TCRIOXPRINT	(rIOC | 5)
-#define TCRIOIXANYON	(rIOC | 6)
-#define	TCRIOIXANYOFF	(rIOC | 7)
-#define TCRIOIXONON	(rIOC | 8)
-#define	TCRIOIXONOFF	(rIOC | 9)
-#define	TCRIOMBIS	(rIOC | 10)
-#define	TCRIOMBIC	(rIOC | 11)
-#define	TCRIOTRIAD	(rIOC | 12)
-#define TCRIOTSTATE	(rIOC | 13)
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** Add RIO ioctls for manipulating RTS and CTS flow control, (as LynxOS
-** appears to not support hardware flow control).
-*/
-#define TCRIOCTSFLOWEN	(rIOC | 14)	/* enable CTS flow control */
-#define TCRIOCTSFLOWDIS	(rIOC | 15)	/* disable CTS flow control */
-#define TCRIORTSFLOWEN	(rIOC | 16)	/* enable RTS flow control */
-#define TCRIORTSFLOWDIS	(rIOC | 17)	/* disable RTS flow control */
-
-/*
-** 09.12.1998 ARG - ESIL 0776 part fix
-** Definition for 'RIOC' also appears in daemon.h, so we'd better do a
-** #ifndef here first.
-** 'RIO_QUICK_CHECK' also #define'd here as this ioctl is now
-** allowed to be used by customers.
-**
-** 05.02.1999 ARG -
-** This is what I've decied to do with ioctls etc., which are intended to be
-** invoked from users applications :
-** Anything that needs to be defined here will be removed from daemon.h, that
-** way it won't end up having to be defined/maintained in two places. The only
-** consequence of this is that this file should now be #include'd by daemon.h
-**
-** 'stats' ioctls now #define'd here as they are to be used by customers.
-*/
 #define	RIOC	('R'<<8)|('i'<<16)|('o'<<24)
 
 #define	RIO_QUICK_CHECK	  	(RIOC | 105)
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 1efde3b..fe00c7d 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -22,7 +22,7 @@ config TCG_TPM
 
 config TCG_TIS
 	tristate "TPM Interface Specification 1.2 Interface"
-	depends on TCG_TPM
+	depends on TCG_TPM && PNPACPI
 	---help---
 	  If you have a TPM security chip that is compliant with the
 	  TCG TIS 1.2 TPM specification say Yes and it will be accessible
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 54a4c80..050ced2 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -140,7 +140,7 @@ #ifdef CONFIG_ACPI
 extern struct dentry ** tpm_bios_log_setup(char *);
 extern void tpm_bios_log_teardown(struct dentry **);
 #else
-static inline struct dentry* tpm_bios_log_setup(char *name)
+static inline struct dentry ** tpm_bios_log_setup(char *name)
 {
 	return NULL;
 }
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index b9cae9a..f621168 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -55,7 +55,7 @@ enum tis_int_flags {
 };
 
 enum tis_defaults {
-	TIS_MEM_BASE = 0xFED4000,
+	TIS_MEM_BASE = 0xFED40000,
 	TIS_MEM_LEN = 0x5000,
 	TIS_SHORT_TIMEOUT = 750,	/* ms */
 	TIS_LONG_TIMEOUT = 2000,	/* 2 sec */
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f07637a..a88b94a 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -398,7 +398,7 @@ int tty_insert_flip_string_flags(struct 
 	while (unlikely(size > copied));
 	return copied;
 }
-EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
 
 void tty_schedule_flip(struct tty_struct *tty)
 {
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index a13395e..fa2ba9e 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -33,11 +33,6 @@
  *	82801E   (C-ICH)  : document number 273599-001, 273645-002,
  *	82801EB  (ICH5)   : document number 252516-001, 252517-003,
  *	82801ER  (ICH5R)  : document number 252516-001, 252517-003,
- *	82801FB  (ICH6)   : document number 301473-002, 301474-007,
- *	82801FR  (ICH6R)  : document number 301473-002, 301474-007,
- *	82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- *	82801FW  (ICH6W)  : document number 301473-001, 301474-007,
- *	82801FRW (ICH6RW) : document number 301473-001, 301474-007
  *
  *  20000710 Nils Faerber
  *	Initial Version 0.01
@@ -66,6 +61,10 @@
  *  20050807 Wim Van Sebroeck <wim@iguana.be>
  *	0.08 Make sure that the watchdog is only "armed" when started.
  *	     (Kernel Bug 4251)
+ *  20060416 Wim Van Sebroeck <wim@iguana.be>
+ *	0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
+ *	     ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
+ *	     chipsets)
  */
 
 /*
@@ -90,7 +89,7 @@ #include <asm/io.h>
 #include "i8xx_tco.h"
 
 /* Module and version information */
-#define TCO_VERSION "0.08"
+#define TCO_VERSION "0.09"
 #define TCO_MODULE_NAME "i8xx TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 #define PFX TCO_MODULE_NAME ": "
@@ -391,11 +390,6 @@ static struct pci_device_id i8xx_tco_pci
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 9dc5473..1ea04e9 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -423,6 +423,12 @@ static int s3c2410wdt_probe(struct platf
 	if (tmr_atboot && started == 0) {
 		printk(KERN_INFO PFX "Starting Watchdog Timer\n");
 		s3c2410wdt_start();
+	} else if (!tmr_atboot) {
+		/* if we're not enabling the watchdog, then ensure it is
+		 * disabled if it has been left running from the bootloader
+		 * or other source */
+
+		s3c2410wdt_stop();
 	}
 
 	return 0;
diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c
index 515ce75..20b88f9 100644
--- a/drivers/char/watchdog/sc1200wdt.c
+++ b/drivers/char/watchdog/sc1200wdt.c
@@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void)
 {
 	int ret;
 
-	printk(banner);
+	printk("%s\n", banner);
 
 	spin_lock_init(&sc1200wdt_lock);
 	sema_init(&open_sem, 1);
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 8bd305e..a140e45 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -133,6 +133,9 @@ static void scx200_acb_machine(struct sc
 
 		outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
 		outb(ACBST_STASTR | ACBST_NEGACK, ACBST);
+
+		/* Reset the status register */
+		outb(0, ACBST);
 		return;
 	}
 
@@ -228,6 +231,10 @@ static void scx200_acb_poll(struct scx20
 	timeout = jiffies + POLL_TIMEOUT;
 	while (time_before(jiffies, timeout)) {
 		status = inb(ACBST);
+
+		/* Reset the status register to avoid the hang */
+		outb(0, ACBST);
+
 		if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) {
 			scx200_acb_machine(iface, status);
 			return;
@@ -415,7 +422,6 @@ static int  __init scx200_acb_create(con
 	struct scx200_acb_iface *iface;
 	struct i2c_adapter *adapter;
 	int rc;
-	char description[64];
 
 	iface = kzalloc(sizeof(*iface), GFP_KERNEL);
 	if (!iface) {
@@ -434,10 +440,7 @@ static int  __init scx200_acb_create(con
 
 	mutex_init(&iface->mutex);
 
-	snprintf(description, sizeof(description), "%s ACCESS.bus [%s]",
-		 text, adapter->name);
-
-	if (request_region(base, 8, description) == 0) {
+	if (!request_region(base, 8, adapter->name)) {
 		printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
 			base, base + 8-1);
 		rc = -EBUSY;
@@ -524,6 +527,9 @@ static int __init scx200_acb_init(void)
 	} else if (pci_dev_present(divil_pci))
 		rc = scx200_add_cs553x();
 
+	/* If at least one bus was created, init must succeed */
+	if (scx200_acb_list)
+		return 0;
 	return rc;
 }
 
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 4961f1e..602797a 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -392,6 +392,7 @@ static struct pcmcia_device_id ide_ids[]
 	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 78e30f8..ffca8b6 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -553,6 +553,8 @@ pmac_ide_init_hwif_ports(hw_regs_t *hw,
 
 	if (irq != NULL)
 		*irq = pmac_ide[ix].irq;
+
+	hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
 }
 
 #define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 1922287..11f1377 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_oh
 	 * register content.
 	 * To actually enable physical responses is the job of our interrupt
 	 * handler which programs the physical request filter. */
-	reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
+	reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
 
 	DBGMSG("physUpperBoundOffset=%08x",
 	       reg_read(ohci, OHCI1394_PhyUpperBound));
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index f420660..8a23fb5 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -42,6 +42,7 @@ #include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/string.h>
+#include <linux/stringify.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/fs.h>
@@ -117,7 +118,8 @@ MODULE_PARM_DESC(serialize_io, "Serializ
  */
 static int max_sectors = SBP2_MAX_SECTORS;
 module_param(max_sectors, int, 0444);
-MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)");
+MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
+		 __stringify(SBP2_MAX_SECTORS) ")");
 
 /*
  * Exclusive login to sbp2 device? In most cases, the sbp2 driver should
@@ -135,18 +137,45 @@ module_param(exclusive_login, int, 0644)
 MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)");
 
 /*
- * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
- * if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows inquiry
- * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
+ * If any of the following workarounds is required for your device to work,
+ * please submit the kernel messages logged by sbp2 to the linux1394-devel
+ * mailing list.
  *
- * If force_inquiry_hack=1 is required for your device to work,
- * please submit the logged sbp2_firmware_revision value of this device to
- * the linux1394-devel mailing list.
+ * - 128kB max transfer
+ *   Limit transfer size. Necessary for some old bridges.
+ *
+ * - 36 byte inquiry
+ *   When scsi_mod probes the device, let the inquiry command look like that
+ *   from MS Windows.
+ *
+ * - skip mode page 8
+ *   Suppress sending of mode_sense for mode page 8 if the device pretends to
+ *   support the SCSI Primary Block commands instead of Reduced Block Commands.
+ *
+ * - fix capacity
+ *   Tell sd_mod to correct the last sector number reported by read_capacity.
+ *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
+ *   Don't use this with devices which don't have this bug.
+ *
+ * - override internal blacklist
+ *   Instead of adding to the built-in blacklist, use only the workarounds
+ *   specified in the module load parameter.
+ *   Useful if a blacklist entry interfered with a non-broken device.
  */
+static int sbp2_default_workarounds;
+module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
+MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
+	", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
+	", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
+	", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
+	", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+	", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
+	", or a combination)");
+
+/* legacy parameter */
 static int force_inquiry_hack;
 module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
+MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");
 
 /*
  * Export information about protocols/devices supported by this driver.
@@ -266,14 +295,55 @@ static struct hpsb_protocol_driver sbp2_
 };
 
 /*
- * List of device firmwares that require the inquiry hack.
- * Yields a few false positives but did not break other devices so far.
+ * List of devices with known bugs.
+ *
+ * The firmware_revision field, masked with 0xffff00, is the best indicator
+ * for the type of bridge chip of a device.  It yields a few false positives
+ * but this did not break correctly behaving devices so far.
  */
-static u32 sbp2_broken_inquiry_list[] = {
-	0x00002800,	/* Stefan Richter <stefanr@s5r6.in-berlin.de> */
-			/* DViCO Momobay CX-1 */
-	0x00000200	/* Andreas Plesch <plesch@fas.harvard.edu> */
-			/* QPS Fire DVDBurner */
+static const struct {
+	u32 firmware_revision;
+	u32 model_id;
+	unsigned workarounds;
+} sbp2_workarounds_table[] = {
+	/* TSB42AA9 */ {
+		.firmware_revision	= 0x002800,
+		.workarounds		= SBP2_WORKAROUND_INQUIRY_36 |
+					  SBP2_WORKAROUND_MODE_SENSE_8,
+	},
+	/* Initio bridges, actually only needed for some older ones */ {
+		.firmware_revision	= 0x000200,
+		.workarounds		= SBP2_WORKAROUND_INQUIRY_36,
+	},
+	/* Symbios bridge */ {
+		.firmware_revision	= 0xa0b800,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
+	},
+	/*
+	 * Note about the following Apple iPod blacklist entries:
+	 *
+	 * There are iPods (2nd gen, 3rd gen) with model_id==0.  Since our
+	 * matching logic treats 0 as a wildcard, we cannot match this ID
+	 * without rewriting the matching routine.  Fortunately these iPods
+	 * do not feature the read_capacity bug according to one report.
+	 * Read_capacity behaviour as well as model_id could change due to
+	 * Apple-supplied firmware updates though.
+	 */
+	/* iPod 4th generation */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000021,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod mini */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000023,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod Photo */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x00007e,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	}
 };
 
 /**************************************
@@ -765,11 +835,16 @@ #endif
 
 	/* Register the status FIFO address range. We could use the same FIFO
 	 * for targets at different nodes. However we need different FIFOs per
-	 * target in order to support multi-unit devices. */
+	 * target in order to support multi-unit devices.
+	 * The FIFO is located out of the local host controller's physical range
+	 * but, if possible, within the posted write area. Status writes will
+	 * then be performed as unified transactions. This slightly reduces
+	 * bandwidth usage, and some Prolific based devices seem to require it.
+	 */
 	scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
 			&sbp2_highlevel, ud->ne->host, &sbp2_ops,
 			sizeof(struct sbp2_status_block), sizeof(quadlet_t),
-			~0ULL, ~0ULL);
+			0x010000000000ULL, CSR1212_ALL_SPACE_END);
 	if (!scsi_id->status_fifo_addr) {
 		SBP2_ERR("failed to allocate status FIFO address range");
 		goto failed_alloc;
@@ -1450,7 +1525,8 @@ static void sbp2_parse_unit_directory(st
 	struct csr1212_dentry *dentry;
 	u64 management_agent_addr;
 	u32 command_set_spec_id, command_set, unit_characteristics,
-	    firmware_revision, workarounds;
+	    firmware_revision;
+	unsigned workarounds;
 	int i;
 
 	SBP2_DEBUG_ENTER();
@@ -1506,12 +1582,8 @@ static void sbp2_parse_unit_directory(st
 		case SBP2_FIRMWARE_REVISION_KEY:
 			/* Firmware revision */
 			firmware_revision = kv->value.immediate;
-			if (force_inquiry_hack)
-				SBP2_INFO("sbp2_firmware_revision = %x",
-					  (unsigned int)firmware_revision);
-			else
-				SBP2_DEBUG("sbp2_firmware_revision = %x",
-					   (unsigned int)firmware_revision);
+			SBP2_DEBUG("sbp2_firmware_revision = %x",
+				   (unsigned int)firmware_revision);
 			break;
 
 		default:
@@ -1519,41 +1591,44 @@ static void sbp2_parse_unit_directory(st
 		}
 	}
 
-	/* This is the start of our broken device checking. We try to hack
-	 * around oddities and known defects.  */
-	workarounds = 0x0;
+	workarounds = sbp2_default_workarounds;
+	if (force_inquiry_hack) {
+		SBP2_WARN("force_inquiry_hack is deprecated. "
+			  "Use parameter 'workarounds' instead.");
+		workarounds |= SBP2_WORKAROUND_INQUIRY_36;
+	}
 
-	/* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a
-	 * bridge with 128KB max transfer size limitation. For sanity, we
-	 * only voice this when the current max_sectors setting
-	 * exceeds the 128k limit. By default, that is not the case.
-	 *
-	 * It would be really nice if we could detect this before the scsi
-	 * host gets initialized. That way we can down-force the
-	 * max_sectors to account for it. That is not currently
-	 * possible.  */
-	if ((firmware_revision & 0xffff00) ==
-			SBP2_128KB_BROKEN_FIRMWARE &&
-			(max_sectors * 512) > (128*1024)) {
-		SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.",
-				NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
-		SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!",
-				max_sectors);
-		workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER;
-	}
-
-	/* Check for a blacklisted set of devices that require us to force
-	 * a 36 byte host inquiry. This can be overriden as a module param
-	 * (to force all hosts).  */
-	for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
-		if ((firmware_revision & 0xffff00) ==
-				sbp2_broken_inquiry_list[i]) {
-			SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
-					NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
-			workarounds |= SBP2_BREAKAGE_INQUIRY_HACK;
-			break; /* No need to continue. */
+	if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
+		for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
+			if (sbp2_workarounds_table[i].firmware_revision &&
+			    sbp2_workarounds_table[i].firmware_revision !=
+			    (firmware_revision & 0xffff00))
+				continue;
+			if (sbp2_workarounds_table[i].model_id &&
+			    sbp2_workarounds_table[i].model_id != ud->model_id)
+				continue;
+			workarounds |= sbp2_workarounds_table[i].workarounds;
+			break;
 		}
-	}
+
+	if (workarounds)
+		SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "
+			  "(firmware_revision 0x%06x, vendor_id 0x%06x,"
+			  " model_id 0x%06x)",
+			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+			  workarounds, firmware_revision,
+			  ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
+			  ud->model_id);
+
+	/* We would need one SCSI host template for each target to adjust
+	 * max_sectors on the fly, therefore warn only. */
+	if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+	    (max_sectors * 512) > (128 * 1024))
+		SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
+			  "max transfer size. WARNING: Current max_sectors "
+			  "setting is larger than 128KB (%d sectors)",
+			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+			  max_sectors);
 
 	/* If this is a logical unit directory entry, process the parent
 	 * to get the values. */
@@ -2447,19 +2522,25 @@ static int sbp2scsi_slave_alloc(struct s
 
 	scsi_id->sdev = sdev;
 
-	if (force_inquiry_hack ||
-	    scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+	if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
 		sdev->inquiry_len = 36;
-		sdev->skip_ms_page_8 = 1;
-	}
 	return 0;
 }
 
 static int sbp2scsi_slave_configure(struct scsi_device *sdev)
 {
+	struct scsi_id_instance_data *scsi_id =
+		(struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
 	blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
+
+	if (sdev->type == TYPE_DISK &&
+	    scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+		sdev->skip_ms_page_8 = 1;
+	if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
+		sdev->fix_capacity = 1;
 	return 0;
 }
 
@@ -2603,7 +2684,9 @@ static int sbp2_module_init(void)
 		scsi_driver_template.cmd_per_lun = 1;
 	}
 
-	/* Set max sectors (module load option). Default is 255 sectors. */
+	if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+	    (max_sectors * 512) > (128 * 1024))
+		max_sectors = 128 * 1024 / 512;
 	scsi_driver_template.max_sectors = max_sectors;
 
 	/* Register our high level driver with 1394 stack */
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index e2d357a..f4ccc9d 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -227,11 +227,6 @@ #define SBP2_UNIT_SPEC_ID_ENTRY					0x00
 #define SBP2_SW_VERSION_ENTRY					0x00010483
 
 /*
- * Other misc defines
- */
-#define SBP2_128KB_BROKEN_FIRMWARE				0xa0b800
-
-/*
  * SCSI specific stuff
  */
 
@@ -239,6 +234,13 @@ #define SBP2_MAX_SG_ELEMENT_LENGTH	0xf00
 #define SBP2_MAX_SECTORS		255	/* Max sectors supported */
 #define SBP2_MAX_CMDS			8	/* This should be safe */
 
+/* Flags for detected oddities and brokeness */
+#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1
+#define SBP2_WORKAROUND_INQUIRY_36	0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8	0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY	0x8
+#define SBP2_WORKAROUND_OVERRIDE	0x100
+
 /* This is the two dma types we use for cmd_dma below */
 enum cmd_dma_types {
 	CMD_DMA_NONE,
@@ -268,10 +270,6 @@ struct sbp2_command_info {
 
 };
 
-/* A list of flags for detected oddities and brokeness. */
-#define SBP2_BREAKAGE_128K_MAX_TRANSFER		0x1
-#define SBP2_BREAKAGE_INQUIRY_HACK		0x2
-
 struct sbp2scsi_host_info;
 
 /*
@@ -345,7 +343,7 @@ struct scsi_id_instance_data {
 	struct Scsi_Host *scsi_host;
 
 	/* Device specific workarounds/brokeness */
-	u32 workarounds;
+	unsigned workarounds;
 };
 
 /* Sbp2 host data structure (one per IEEE1394 host) */
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 7cfedb8..86fee43 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -34,6 +34,8 @@
  *
  * $Id: cm.c 2821 2005-07-08 17:07:28Z sean.hefty $
  */
+
+#include <linux/completion.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/idr.h>
@@ -122,7 +124,7 @@ struct cm_id_private {
 	struct rb_node service_node;
 	struct rb_node sidr_id_node;
 	spinlock_t lock;	/* Do not acquire inside cm.lock */
-	wait_queue_head_t wait;
+	struct completion comp;
 	atomic_t refcount;
 
 	struct ib_mad_send_buf *msg;
@@ -159,7 +161,7 @@ static void cm_work_handler(void *data);
 static inline void cm_deref_id(struct cm_id_private *cm_id_priv)
 {
 	if (atomic_dec_and_test(&cm_id_priv->refcount))
-		wake_up(&cm_id_priv->wait);
+		complete(&cm_id_priv->comp);
 }
 
 static int cm_alloc_msg(struct cm_id_private *cm_id_priv,
@@ -559,7 +561,7 @@ struct ib_cm_id *ib_create_cm_id(struct 
 		goto error;
 
 	spin_lock_init(&cm_id_priv->lock);
-	init_waitqueue_head(&cm_id_priv->wait);
+	init_completion(&cm_id_priv->comp);
 	INIT_LIST_HEAD(&cm_id_priv->work_list);
 	atomic_set(&cm_id_priv->work_count, -1);
 	atomic_set(&cm_id_priv->refcount, 1);
@@ -724,8 +726,8 @@ retest:
 	}
 
 	cm_free_id(cm_id->local_id);
-	atomic_dec(&cm_id_priv->refcount);
-	wait_event(cm_id_priv->wait, !atomic_read(&cm_id_priv->refcount));
+	cm_deref_id(cm_id_priv);
+	wait_for_completion(&cm_id_priv->comp);
 	while ((work = cm_dequeue_work(cm_id_priv)) != NULL)
 		cm_free_work(work);
 	if (cm_id_priv->private_data && cm_id_priv->private_data_len)
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 469b692..5ad41a6 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -352,7 +352,7 @@ struct ib_mad_agent *ib_register_mad_age
 	INIT_WORK(&mad_agent_priv->local_work, local_completions,
 		   mad_agent_priv);
 	atomic_set(&mad_agent_priv->refcount, 1);
-	init_waitqueue_head(&mad_agent_priv->wait);
+	init_completion(&mad_agent_priv->comp);
 
 	return &mad_agent_priv->agent;
 
@@ -467,7 +467,7 @@ struct ib_mad_agent *ib_register_mad_sno
 	mad_snoop_priv->agent.qp = port_priv->qp_info[qpn].qp;
 	mad_snoop_priv->agent.port_num = port_num;
 	mad_snoop_priv->mad_snoop_flags = mad_snoop_flags;
-	init_waitqueue_head(&mad_snoop_priv->wait);
+	init_completion(&mad_snoop_priv->comp);
 	mad_snoop_priv->snoop_index = register_snoop_agent(
 						&port_priv->qp_info[qpn],
 						mad_snoop_priv);
@@ -486,6 +486,18 @@ error1:
 }
 EXPORT_SYMBOL(ib_register_mad_snoop);
 
+static inline void deref_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
+{
+	if (atomic_dec_and_test(&mad_agent_priv->refcount))
+		complete(&mad_agent_priv->comp);
+}
+
+static inline void deref_snoop_agent(struct ib_mad_snoop_private *mad_snoop_priv)
+{
+	if (atomic_dec_and_test(&mad_snoop_priv->refcount))
+		complete(&mad_snoop_priv->comp);
+}
+
 static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
 {
 	struct ib_mad_port_private *port_priv;
@@ -509,9 +521,8 @@ static void unregister_mad_agent(struct 
 	flush_workqueue(port_priv->wq);
 	ib_cancel_rmpp_recvs(mad_agent_priv);
 
-	atomic_dec(&mad_agent_priv->refcount);
-	wait_event(mad_agent_priv->wait,
-		   !atomic_read(&mad_agent_priv->refcount));
+	deref_mad_agent(mad_agent_priv);
+	wait_for_completion(&mad_agent_priv->comp);
 
 	kfree(mad_agent_priv->reg_req);
 	ib_dereg_mr(mad_agent_priv->agent.mr);
@@ -529,9 +540,8 @@ static void unregister_mad_snoop(struct 
 	atomic_dec(&qp_info->snoop_count);
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 
-	atomic_dec(&mad_snoop_priv->refcount);
-	wait_event(mad_snoop_priv->wait,
-		   !atomic_read(&mad_snoop_priv->refcount));
+	deref_snoop_agent(mad_snoop_priv);
+	wait_for_completion(&mad_snoop_priv->comp);
 
 	kfree(mad_snoop_priv);
 }
@@ -600,8 +610,7 @@ static void snoop_send(struct ib_mad_qp_
 		spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 		mad_snoop_priv->agent.snoop_handler(&mad_snoop_priv->agent,
 						    send_buf, mad_send_wc);
-		if (atomic_dec_and_test(&mad_snoop_priv->refcount))
-			wake_up(&mad_snoop_priv->wait);
+		deref_snoop_agent(mad_snoop_priv);
 		spin_lock_irqsave(&qp_info->snoop_lock, flags);
 	}
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
@@ -626,8 +635,7 @@ static void snoop_recv(struct ib_mad_qp_
 		spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 		mad_snoop_priv->agent.recv_handler(&mad_snoop_priv->agent,
 						   mad_recv_wc);
-		if (atomic_dec_and_test(&mad_snoop_priv->refcount))
-			wake_up(&mad_snoop_priv->wait);
+		deref_snoop_agent(mad_snoop_priv);
 		spin_lock_irqsave(&qp_info->snoop_lock, flags);
 	}
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
@@ -968,8 +976,7 @@ void ib_free_send_mad(struct ib_mad_send
 
 	free_send_rmpp_list(mad_send_wr);
 	kfree(send_buf->mad);
-	if (atomic_dec_and_test(&mad_agent_priv->refcount))
-		wake_up(&mad_agent_priv->wait);
+	deref_mad_agent(mad_agent_priv);
 }
 EXPORT_SYMBOL(ib_free_send_mad);
 
@@ -1757,8 +1764,7 @@ static void ib_mad_complete_recv(struct 
 		mad_recv_wc = ib_process_rmpp_recv_wc(mad_agent_priv,
 						      mad_recv_wc);
 		if (!mad_recv_wc) {
-			if (atomic_dec_and_test(&mad_agent_priv->refcount))
-				wake_up(&mad_agent_priv->wait);
+			deref_mad_agent(mad_agent_priv);
 			return;
 		}
 	}
@@ -1770,8 +1776,7 @@ static void ib_mad_complete_recv(struct 
 		if (!mad_send_wr) {
 			spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
 			ib_free_recv_mad(mad_recv_wc);
-			if (atomic_dec_and_test(&mad_agent_priv->refcount))
-				wake_up(&mad_agent_priv->wait);
+			deref_mad_agent(mad_agent_priv);
 			return;
 		}
 		ib_mark_mad_done(mad_send_wr);
@@ -1790,8 +1795,7 @@ static void ib_mad_complete_recv(struct 
 	} else {
 		mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent,
 						   mad_recv_wc);
-		if (atomic_dec_and_test(&mad_agent_priv->refcount))
-			wake_up(&mad_agent_priv->wait);
+		deref_mad_agent(mad_agent_priv);
 	}
 }
 
@@ -2021,8 +2025,7 @@ void ib_mad_complete_send_wr(struct ib_m
 						   mad_send_wc);
 
 	/* Release reference on agent taken when sending */
-	if (atomic_dec_and_test(&mad_agent_priv->refcount))
-		wake_up(&mad_agent_priv->wait);
+	deref_mad_agent(mad_agent_priv);
 	return;
 done:
 	spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index 6c9c133..b4fa28d 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -37,6 +37,7 @@
 #ifndef __IB_MAD_PRIV_H__
 #define __IB_MAD_PRIV_H__
 
+#include <linux/completion.h>
 #include <linux/pci.h>
 #include <linux/kthread.h>
 #include <linux/workqueue.h>
@@ -108,7 +109,7 @@ struct ib_mad_agent_private {
 	struct list_head rmpp_list;
 
 	atomic_t refcount;
-	wait_queue_head_t wait;
+	struct completion comp;
 };
 
 struct ib_mad_snoop_private {
@@ -117,7 +118,7 @@ struct ib_mad_snoop_private {
 	int snoop_index;
 	int mad_snoop_flags;
 	atomic_t refcount;
-	wait_queue_head_t wait;
+	struct completion comp;
 };
 
 struct ib_mad_send_wr_private {
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index dfd4e58..d4704e0 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -49,7 +49,7 @@ struct mad_rmpp_recv {
 	struct list_head list;
 	struct work_struct timeout_work;
 	struct work_struct cleanup_work;
-	wait_queue_head_t wait;
+	struct completion comp;
 	enum rmpp_state state;
 	spinlock_t lock;
 	atomic_t refcount;
@@ -69,10 +69,16 @@ struct mad_rmpp_recv {
 	u8 method;
 };
 
+static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
+{
+	if (atomic_dec_and_test(&rmpp_recv->refcount))
+		complete(&rmpp_recv->comp);
+}
+
 static void destroy_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
 {
-	atomic_dec(&rmpp_recv->refcount);
-	wait_event(rmpp_recv->wait, !atomic_read(&rmpp_recv->refcount));
+	deref_rmpp_recv(rmpp_recv);
+	wait_for_completion(&rmpp_recv->comp);
 	ib_destroy_ah(rmpp_recv->ah);
 	kfree(rmpp_recv);
 }
@@ -253,7 +259,7 @@ create_rmpp_recv(struct ib_mad_agent_pri
 		goto error;
 
 	rmpp_recv->agent = agent;
-	init_waitqueue_head(&rmpp_recv->wait);
+	init_completion(&rmpp_recv->comp);
 	INIT_WORK(&rmpp_recv->timeout_work, recv_timeout_handler, rmpp_recv);
 	INIT_WORK(&rmpp_recv->cleanup_work, recv_cleanup_handler, rmpp_recv);
 	spin_lock_init(&rmpp_recv->lock);
@@ -279,12 +285,6 @@ error:	kfree(rmpp_recv);
 	return NULL;
 }
 
-static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
-{
-	if (atomic_dec_and_test(&rmpp_recv->refcount))
-		wake_up(&rmpp_recv->wait);
-}
-
 static struct mad_rmpp_recv *
 find_rmpp_recv(struct ib_mad_agent_private *agent,
 	       struct ib_mad_recv_wc *mad_recv_wc)
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index f6a0596..9164a09 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -32,6 +32,8 @@
  *
  * $Id: ucm.c 2594 2005-06-13 19:46:02Z libor $
  */
+
+#include <linux/completion.h>
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/module.h>
@@ -72,7 +74,7 @@ struct ib_ucm_file {
 
 struct ib_ucm_context {
 	int                 id;
-	wait_queue_head_t   wait;
+	struct completion   comp;
 	atomic_t            ref;
 	int		    events_reported;
 
@@ -138,7 +140,7 @@ static struct ib_ucm_context *ib_ucm_ctx
 static void ib_ucm_ctx_put(struct ib_ucm_context *ctx)
 {
 	if (atomic_dec_and_test(&ctx->ref))
-		wake_up(&ctx->wait);
+		complete(&ctx->comp);
 }
 
 static inline int ib_ucm_new_cm_id(int event)
@@ -178,7 +180,7 @@ static struct ib_ucm_context *ib_ucm_ctx
 		return NULL;
 
 	atomic_set(&ctx->ref, 1);
-	init_waitqueue_head(&ctx->wait);
+	init_completion(&ctx->comp);
 	ctx->file = file;
 	INIT_LIST_HEAD(&ctx->events);
 
@@ -586,8 +588,8 @@ static ssize_t ib_ucm_destroy_id(struct 
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
-	atomic_dec(&ctx->ref);
-	wait_event(ctx->wait, !atomic_read(&ctx->ref));
+	ib_ucm_ctx_put(ctx);
+	wait_for_completion(&ctx->comp);
 
 	/* No new events will be generated after destroying the cm_id. */
 	ib_destroy_cm_id(ctx->cm_id);
diff --git a/drivers/infiniband/core/uverbs_mem.c b/drivers/infiniband/core/uverbs_mem.c
index 36a32c3..efe147d 100644
--- a/drivers/infiniband/core/uverbs_mem.c
+++ b/drivers/infiniband/core/uverbs_mem.c
@@ -211,8 +211,10 @@ void ib_umem_release_on_close(struct ib_
 	 */
 
 	work = kmalloc(sizeof *work, GFP_KERNEL);
-	if (!work)
+	if (!work) {
+		mmput(mm);
 		return;
+	}
 
 	INIT_WORK(&work->work, ib_umem_account, work);
 	work->mm   = mm;
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 398add4..3697eda 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -116,10 +116,9 @@ #define PCI_DEVICE_ID_INFINIPATH_HT 0xd
 #define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
 
 static const struct pci_device_id ipath_pci_tbl[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE,
-		    PCI_DEVICE_ID_INFINIPATH_HT)},
-	{PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE,
-		    PCI_DEVICE_ID_INFINIPATH_PE800)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
+	{ 0, }
 };
 
 MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 1985b5d..798e13e 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -182,7 +182,7 @@ struct mthca_cmd_context {
 	u8                status;
 };
 
-static int fw_cmd_doorbell = 1;
+static int fw_cmd_doorbell = 0;
 module_param(fw_cmd_doorbell, int, 0644);
 MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero "
 		 "(and supported by FW)");
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 19765f6..07c13be 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -1727,23 +1727,7 @@ int mthca_tavor_post_receive(struct ib_q
 
 	ind = qp->rq.next_ind;
 
-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
-			doorbell[1] = cpu_to_be32(qp->qpn << 8);
-
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
-			size0 = 0;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		if (mthca_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
 			mthca_err(dev, "RQ %06x full (%u head, %u tail,"
 					" %d max, %d nreq)\n", qp->qpn,
@@ -1797,6 +1781,23 @@ int mthca_tavor_post_receive(struct ib_q
 		++ind;
 		if (unlikely(ind >= qp->rq.max))
 			ind -= qp->rq.max;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
+			doorbell[1] = cpu_to_be32(qp->qpn << 8);
+
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
+			size0 = 0;
+		}
 	}
 
 out:
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index c32ce43..9cbdffa 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -340,7 +340,10 @@ static void srp_disconnect_target(struct
 	/* XXX should send SRP_I_LOGOUT request */
 
 	init_completion(&target->done);
-	ib_send_cm_dreq(target->cm_id, NULL, 0);
+	if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
+		printk(KERN_DEBUG PFX "Sending CM DREQ failed\n");
+		return;
+	}
 	wait_for_completion(&target->done);
 }
 
@@ -351,7 +354,6 @@ static void srp_remove_work(void *target
 	spin_lock_irq(target->scsi_host->host_lock);
 	if (target->state != SRP_TARGET_DEAD) {
 		spin_unlock_irq(target->scsi_host->host_lock);
-		scsi_host_put(target->scsi_host);
 		return;
 	}
 	target->state = SRP_TARGET_REMOVED;
@@ -365,8 +367,6 @@ static void srp_remove_work(void *target
 	ib_destroy_cm_id(target->cm_id);
 	srp_free_target_ib(target);
 	scsi_host_put(target->scsi_host);
-	/* And another put to really free the target port... */
-	scsi_host_put(target->scsi_host);
 }
 
 static int srp_connect_target(struct srp_target_port *target)
@@ -1241,7 +1241,7 @@ static int srp_reset_device(struct scsi_
 	list_for_each_entry_safe(req, tmp, &target->req_queue, list)
 		if (req->scmnd->device == scmnd->device) {
 			req->scmnd->result = DID_RESET << 16;
-			scmnd->scsi_done(scmnd);
+			req->scmnd->scsi_done(req->scmnd);
 			srp_remove_req(target, req);
 		}
 
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 9b493f0..173c899 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1499,7 +1499,6 @@ static int __init capi_init(void)
 		printk(KERN_ERR "capi20: unable to get major %d\n", capi_major);
 		return major_ret;
 	}
-	capi_major = major_ret;
 	capi_class = class_create(THIS_MODULE, "capi");
 	if (IS_ERR(capi_class)) {
 		unregister_chrdev(capi_major, "capi20");
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index bfb73fd..d86ab68 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -710,8 +710,8 @@ static int gigaset_probe(struct usb_inte
 	retval = -ENODEV; //FIXME
 
 	/* See if the device offered us matches what we can accept */
-	if ((le16_to_cpu(udev->descriptor.idVendor  != USB_M105_VENDOR_ID)) ||
-	    (le16_to_cpu(udev->descriptor.idProduct != USB_M105_PRODUCT_ID)))
+	if ((le16_to_cpu(udev->descriptor.idVendor)  != USB_M105_VENDOR_ID) ||
+	    (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID))
 		return -ENODEV;
 
 	/* this starts to become ascii art... */
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3585fb1..2ac9024 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -2880,7 +2880,7 @@ #endif
 			p[0]++;
 			i = 0;
 			while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
-			       (i < ISDN_LMSNLEN))
+			       (i < ISDN_LMSNLEN - 1))
 				m->lmsn[i++] = *p[0]++;
 			m->lmsn[i] = '\0';
 			break;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3f5b647..6265062 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -4,8 +4,11 @@ menu "LED devices"
 config NEW_LEDS
 	bool "LED Support"
 	help
-	  Say Y to enable Linux LED support.  This is not related to standard
-	  keyboard LEDs which are controlled via the input system.
+	  Say Y to enable Linux LED support.  This allows control of supported
+	  LEDs from both userspace and optionally, by kernel events (triggers).
+
+	  This is not related to standard keyboard LEDs which are controlled
+	  via the input system.
 
 config LEDS_CLASS
 	tristate "LED Class Support"
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index b0b5d05..c75d0ef 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -19,6 +19,7 @@ #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/timer.h>
 #include <linux/err.h>
+#include <linux/ctype.h>
 #include <linux/leds.h>
 #include "leds.h"
 
@@ -43,9 +44,13 @@ static ssize_t led_brightness_store(stru
 	ssize_t ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
 
-	if (after - buf > 0) {
-		ret = after - buf;
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
+		ret = count;
 		led_set_brightness(led_cdev, state);
 	}
 
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index f484b5d..fbf141e 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -20,6 +20,7 @@ #include <linux/spinlock.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/timer.h>
+#include <linux/ctype.h>
 #include <linux/leds.h>
 #include "leds.h"
 
@@ -69,11 +70,15 @@ static ssize_t led_delay_on_store(struct
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
 
-	if (after - buf > 0) {
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
 		timer_data->delay_on = state;
 		mod_timer(&timer_data->timer, jiffies + 1);
-		ret = after - buf;
+		ret = count;
 	}
 
 	return ret;
@@ -97,11 +102,15 @@ static ssize_t led_delay_off_store(struc
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
+
+	if (*after && isspace(*after))
+		count++;
 
-	if (after - buf > 0) {
+	if (count == size) {
 		timer_data->delay_off = state;
 		mod_timer(&timer_data->timer, jiffies + 1);
-		ret = after - buf;
+		ret = count;
 	}
 
 	return ret;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index d7316b8..3ca3cfb 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2252,7 +2252,7 @@ action_store(mddev_t *mddev, const char 
 	} else {
 		if (cmd_match(page, "check"))
 			set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
-		else if (cmd_match(page, "repair"))
+		else if (!cmd_match(page, "repair"))
 			return -EINVAL;
 		set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 		set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 678f4db..cb8c631 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -331,13 +331,14 @@ static int raid0_run (mddev_t *mddev)
 		goto out_free_conf;
 	size = conf->strip_zone[cur].size;
 
-	for (i=0; i< nb_zone; i++) {
-		conf->hash_table[i] = conf->strip_zone + cur;
+	conf->hash_table[0] = conf->strip_zone + cur;
+	for (i=1; i< nb_zone; i++) {
 		while (size <= conf->hash_spacing) {
 			cur++;
 			size += conf->strip_zone[cur].size;
 		}
 		size -= conf->hash_spacing;
+		conf->hash_table[i] = conf->strip_zone + cur;
 	}
 	if (conf->preshift) {
 		conf->hash_spacing >>= conf->preshift;
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index fffc711..344d83a 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -8,22 +8,54 @@ config VIDEO_DEV
 	tristate "Video For Linux"
 	---help---
 	  Support for audio/video capture and overlay devices and FM radio
-	  cards. The exact capabilities of each device vary. User tools for
-	  this are available from
-	  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+	  cards. The exact capabilities of each device vary.
 
 	  This kernel includes support for the new Video for Linux Two API,
 	  (V4L2) as well as the original system. Drivers and applications
 	  need to be rewritten to use V4L2, but drivers for popular cards
 	  and applications for most video capture functions already exist.
 
-	  Documentation for the original API is included in the file
-	  <file:Documentation/video4linux/API.html>.  Documentation for V4L2 is
-	  available on the web at <http://bytesex.org/v4l/>.
+	  Additional info and docs are available on the web at
+	  <http://linuxtv.org>
+
+	  Documentation for V4L2 is also available on the web at
+	  <http://bytesex.org/v4l/>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called videodev.
 
+config VIDEO_V4L1
+	boolean "Enable Video For Linux API 1 (DEPRECATED)"
+	depends on VIDEO_DEV
+	select VIDEO_V4L1_COMPAT
+	default y
+	---help---
+	  Enables a compatibility API used by most V4L2 devices to allow
+	  its usage with legacy applications that supports only V4L1 api.
+
+	  If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L1_COMPAT
+	boolean "Enable Video For Linux API 1 compatible Layer"
+	depends on VIDEO_DEV
+	default y
+	---help---
+	  This api were developed to be used at Kernel 2.2 and 2.4, but
+	  lacks support for several video standards. There are several
+	  drivers at kernel that still depends on it.
+
+	  Documentation for the original API is included in the file
+	  <Documentation/video4linux/API.html>.
+
+	  User tools for this are available from
+	  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+
+	  If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L2
+	tristate
+	default y
+
 source "drivers/media/video/Kconfig"
 
 source "drivers/media/radio/Kconfig"
@@ -65,4 +97,3 @@ config USB_DABUSB
 	  module will be called dabusb.
 
 endmenu
-
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 6a901a0..9c45b98 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -4,6 +4,7 @@ config VIDEO_SAA7146
 
 config VIDEO_SAA7146_VV
 	tristate
+	select VIDEO_V4L2
 	select VIDEO_BUF
 	select VIDEO_VIDEOBUF
 	select VIDEO_SAA7146
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 3f0ec6b..a97c8f5 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -22,26 +22,26 @@ config DVB
 source "drivers/media/dvb/dvb-core/Kconfig"
 
 comment "Supported SAA7146 based PCI Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/ttpci/Kconfig"
 
 comment "Supported USB Adapters"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && I2C
 source "drivers/media/dvb/dvb-usb/Kconfig"
 source "drivers/media/dvb/ttusb-budget/Kconfig"
 source "drivers/media/dvb/ttusb-dec/Kconfig"
 source "drivers/media/dvb/cinergyT2/Kconfig"
 
 comment "Supported FlexCopII (B2C2) Adapters"
-	depends on DVB_CORE && (PCI || USB)
+	depends on DVB_CORE && (PCI || USB) && I2C
 source "drivers/media/dvb/b2c2/Kconfig"
 
 comment "Supported BT878 Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/bt8xx/Kconfig"
 
 comment "Supported Pluto2 Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/pluto2/Kconfig"
 
 comment "Supported DVB Frontends"
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2963605..d7f1fd5 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -1,6 +1,6 @@
 config DVB_B2C2_FLEXCOP
 	tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select DVB_STV0299
 	select DVB_MT352
 	select DVB_MT312
@@ -16,7 +16,7 @@ config DVB_B2C2_FLEXCOP
 
 config DVB_B2C2_FLEXCOP_PCI
 	tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
-	depends on DVB_B2C2_FLEXCOP && PCI
+	depends on DVB_B2C2_FLEXCOP && PCI && I2C
 	help
 	  Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
 
@@ -24,7 +24,7 @@ config DVB_B2C2_FLEXCOP_PCI
 
 config DVB_B2C2_FLEXCOP_USB
 	tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
-	depends on DVB_B2C2_FLEXCOP && USB
+	depends on DVB_B2C2_FLEXCOP && USB && I2C
 	help
 	  Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
 
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 376ca48..f394002 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,12 +1,13 @@
 config DVB_BT8XX
 	tristate "BT8xx based PCI cards"
-	depends on DVB_CORE && PCI && VIDEO_BT848
+	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
 	select DVB_MT352
 	select DVB_SP887X
 	select DVB_NXT6000
 	select DVB_CX24110
 	select DVB_OR51211
 	select DVB_LGDT330X
+	select DVB_ZL10353
 	select FW_LOADER
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index baa8227..ccc7b2e 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -115,7 +115,7 @@ static int is_pci_slot_eq(struct pci_dev
 	return 0;
 }
 
-static struct bt878 __init *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
+static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
 {
 	unsigned int card_nr;
 
@@ -709,7 +709,7 @@ static void frontend_init(struct dvb_bt8
 		}
 }
 
-static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
 {
 	int result;
 
@@ -794,7 +794,7 @@ static int __init dvb_bt8xx_load_card(st
 	return 0;
 }
 
-static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
+static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
 {
 	struct dvb_bt8xx_card *card;
 	struct pci_dev* bttv_pci_dev;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 71b575d..9325d03 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -902,7 +902,10 @@ static int cinergyt2_probe (struct usb_i
 		return -ENOMEM;
 	}
 
-	dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE);
+	if ((err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE)) < 0) {
+		kfree(cinergyt2);
+		return err;
+	}
 
 	cinergyt2->demux.priv = cinergyt2;
 	cinergyt2->demux.filternum = 256;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 4f8f257..a051790 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -106,6 +106,8 @@ struct dvb_frontend_private {
 	unsigned long tune_mode_flags;
 	unsigned int delay;
 	unsigned int reinitialise;
+	int tone;
+	int voltage;
 
 	/* swzigzag values */
 	unsigned int state;
@@ -537,6 +539,12 @@ static int dvb_frontend_thread(void *dat
 
 		if (fepriv->reinitialise) {
 			dvb_frontend_init(fe);
+			if (fepriv->tone != -1) {
+				fe->ops->set_tone(fe, fepriv->tone);
+			}
+			if (fepriv->voltage != -1) {
+				fe->ops->set_voltage(fe, fepriv->voltage);
+			}
 			fepriv->reinitialise = 0;
 		}
 
@@ -788,6 +796,7 @@ static int dvb_frontend_ioctl(struct ino
 	case FE_SET_TONE:
 		if (fe->ops->set_tone) {
 			err = fe->ops->set_tone(fe, (fe_sec_tone_mode_t) parg);
+			fepriv->tone = (fe_sec_tone_mode_t) parg;
 			fepriv->state = FESTATE_DISEQC;
 			fepriv->status = 0;
 		}
@@ -796,6 +805,7 @@ static int dvb_frontend_ioctl(struct ino
 	case FE_SET_VOLTAGE:
 		if (fe->ops->set_voltage) {
 			err = fe->ops->set_voltage(fe, (fe_sec_voltage_t) parg);
+			fepriv->voltage = (fe_sec_voltage_t) parg;
 			fepriv->state = FESTATE_DISEQC;
 			fepriv->status = 0;
 		}
@@ -995,6 +1005,8 @@ static int dvb_frontend_open(struct inod
 
 		/* normal tune mode when opened R/W */
 		fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT;
+		fepriv->tone = -1;
+		fepriv->voltage = -1;
 	}
 
 	return ret;
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 96fe0ec..3852430 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -219,8 +219,6 @@ int dvb_register_device(struct dvb_adapt
 		return -ENOMEM;
 	}
 
-	mutex_unlock(&dvbdev_register_lock);
-
 	memcpy(dvbdev, template, sizeof(struct dvb_device));
 	dvbdev->type = type;
 	dvbdev->id = id;
@@ -231,6 +229,8 @@ int dvb_register_device(struct dvb_adapt
 
 	list_add_tail (&dvbdev->list_head, &adap->device_list);
 
+	mutex_unlock(&dvbdev_register_lock);
+
 	devfs_mk_cdev(MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
 			S_IFCHR | S_IRUSR | S_IWUSR,
 			"dvb/adapter%d/%s%d", adap->num, dnames[type], id);
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index d3df120..e388fb1 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && I2C
 	select FW_LOADER
 	help
 	  By enabling this you will be able to choose the various supported
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 7edd636..1f0d3e9 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -150,6 +150,15 @@ static int cxusb_power_ctrl(struct dvb_u
 		return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
 }
 
+static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 b = 0;
+	if (onoff)
+		return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
+	else
+		return 0;
+}
+
 static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff)
 {
 	u8 buf[2] = { 0x03, 0x00 };
@@ -544,7 +553,7 @@ static struct dvb_usb_properties cxusb_b
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_lgdt3303_frontend_attach,
 	.tuner_attach     = cxusb_lgh064f_tuner_attach,
 
@@ -589,7 +598,7 @@ static struct dvb_usb_properties cxusb_b
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_dee1601_frontend_attach,
 	.tuner_attach     = cxusb_dee1601_tuner_attach,
 
@@ -638,7 +647,7 @@ static struct dvb_usb_properties cxusb_b
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_mt352_frontend_attach,
 	.tuner_attach     = cxusb_lgz201_tuner_attach,
 
@@ -683,7 +692,7 @@ static struct dvb_usb_properties cxusb_b
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_mt352_frontend_attach,
 	.tuner_attach     = cxusb_dtt7579_tuner_attach,
 
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index d661c6f..691dc84 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -29,6 +29,9 @@ #include <linux/init.h>
 #include "dvb_frontend.h"
 #include "cx24123.h"
 
+#define XTAL 10111000
+
+static int force_band;
 static int debug;
 #define dprintk(args...) \
 	do { \
@@ -52,6 +55,7 @@ struct cx24123_state
 	u32 VGAarg;
 	u32 bandselectarg;
 	u32 pllarg;
+	u32 FILTune;
 
 	/* The Demod/Tuner can't easily provide these, we cache them */
 	u32 currentfreq;
@@ -63,43 +67,33 @@ static struct
 {
 	u32 symbolrate_low;
 	u32 symbolrate_high;
-	u32 VCAslope;
-	u32 VCAoffset;
-	u32 VGA1offset;
-	u32 VGA2offset;
 	u32 VCAprogdata;
 	u32 VGAprogdata;
+	u32 FILTune;
 } cx24123_AGC_vals[] =
 {
 	{
 		.symbolrate_low		= 1000000,
 		.symbolrate_high	= 4999999,
-		.VCAslope		= 0x07,
-		.VCAoffset		= 0x0f,
-		.VGA1offset		= 0x1f8,
-		.VGA2offset		= 0x1f8,
-		.VGAprogdata		= (2 << 18) | (0x1f8 << 9) | 0x1f8,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x07,
+		/* the specs recommend other values for VGA offsets,
+		   but tests show they are wrong */
+		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x07,
+		.FILTune		= 0x27f /* 0.41 V */
 	},
 	{
 		.symbolrate_low		=  5000000,
 		.symbolrate_high	= 14999999,
-		.VCAslope		= 0x1f,
-		.VCAoffset		= 0x1f,
-		.VGA1offset		= 0x1e0,
-		.VGA2offset		= 0x180,
-		.VGAprogdata		= (2 << 18) | (0x180 << 9) | 0x1e0,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x1f,
+		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x1f,
+		.FILTune		= 0x317 /* 0.90 V */
 	},
 	{
 		.symbolrate_low		= 15000000,
 		.symbolrate_high	= 45000000,
-		.VCAslope		= 0x3f,
-		.VCAoffset		= 0x3f,
-		.VGA1offset		= 0x180,
-		.VGA2offset		= 0x100,
-		.VGAprogdata		= (2 << 18) | (0x100 << 9) | 0x180,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x3f,
+		.VGAprogdata		= (1 << 19) | (0x100 << 9) | 0x180,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x3f,
+		.FILTune		= 0x145 /* 2.70 V */
 	},
 };
 
@@ -112,91 +106,80 @@ static struct
 {
 	u32 freq_low;
 	u32 freq_high;
-	u32 bandselect;
 	u32 VCOdivider;
-	u32 VCOnumber;
 	u32 progdata;
 } cx24123_bandselect_vals[] =
 {
+	/* band 1 */
 	{
 		.freq_low	= 950000,
-		.freq_high	= 1018999,
-		.bandselect	= 0x40,
-		.VCOdivider	= 4,
-		.VCOnumber	= 7,
-		.progdata	= (0 << 18) | (0 << 9) | 0x40,
-	},
-	{
-		.freq_low	= 1019000,
 		.freq_high	= 1074999,
-		.bandselect	= 0x80,
 		.VCOdivider	= 4,
-		.VCOnumber	= 8,
-		.progdata	= (0 << 18) | (0 << 9) | 0x80,
+		.progdata	= (0 << 19) | (0 << 9) | 0x40,
 	},
+
+	/* band 2 */
 	{
 		.freq_low	= 1075000,
-		.freq_high	= 1227999,
-		.bandselect	= 0x01,
-		.VCOdivider	= 2,
-		.VCOnumber	= 1,
-		.progdata	= (0 << 18) | (1 << 9) | 0x01,
+		.freq_high	= 1177999,
+		.VCOdivider	= 4,
+		.progdata	= (0 << 19) | (0 << 9) | 0x80,
 	},
+
+	/* band 3 */
 	{
-		.freq_low	= 1228000,
-		.freq_high	= 1349999,
-		.bandselect	= 0x02,
+		.freq_low	= 1178000,
+		.freq_high	= 1295999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 2,
-		.progdata	= (0 << 18) | (1 << 9) | 0x02,
+		.progdata	= (0 << 19) | (1 << 9) | 0x01,
 	},
+
+	/* band 4 */
 	{
-		.freq_low	= 1350000,
-		.freq_high	= 1481999,
-		.bandselect	= 0x04,
+		.freq_low	= 1296000,
+		.freq_high	= 1431999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 3,
-		.progdata	= (0 << 18) | (1 << 9) | 0x04,
+		.progdata	= (0 << 19) | (1 << 9) | 0x02,
 	},
+
+	/* band 5 */
 	{
-		.freq_low	= 1482000,
-		.freq_high	= 1595999,
-		.bandselect	= 0x08,
+		.freq_low	= 1432000,
+		.freq_high	= 1575999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 4,
-		.progdata	= (0 << 18) | (1 << 9) | 0x08,
+		.progdata	= (0 << 19) | (1 << 9) | 0x04,
 	},
+
+	/* band 6 */
 	{
-		.freq_low	= 1596000,
+		.freq_low	= 1576000,
 		.freq_high	= 1717999,
-		.bandselect	= 0x10,
 		.VCOdivider	= 2,
-		.VCOnumber	= 5,
-		.progdata	= (0 << 18) | (1 << 9) | 0x10,
+		.progdata	= (0 << 19) | (1 << 9) | 0x08,
 	},
+
+	/* band 7 */
 	{
 		.freq_low	= 1718000,
 		.freq_high	= 1855999,
-		.bandselect	= 0x20,
 		.VCOdivider	= 2,
-		.VCOnumber	= 6,
-		.progdata	= (0 << 18) | (1 << 9) | 0x20,
+		.progdata	= (0 << 19) | (1 << 9) | 0x10,
 	},
+
+	/* band 8 */
 	{
 		.freq_low	= 1856000,
 		.freq_high	= 2035999,
-		.bandselect	= 0x40,
 		.VCOdivider	= 2,
-		.VCOnumber	= 7,
-		.progdata	= (0 << 18) | (1 << 9) | 0x40,
+		.progdata	= (0 << 19) | (1 << 9) | 0x20,
 	},
+
+	/* band 9 */
 	{
 		.freq_low	= 2036000,
-		.freq_high	= 2149999,
-		.bandselect	= 0x80,
+		.freq_high	= 2150000,
 		.VCOdivider	= 2,
-		.VCOnumber	= 8,
-		.progdata	= (0 << 18) | (1 << 9) | 0x80,
+		.progdata	= (0 << 19) | (1 << 9) | 0x40,
 	},
 };
 
@@ -207,49 +190,44 @@ static struct {
 {
 	{0x00, 0x03}, /* Reset system */
 	{0x00, 0x00}, /* Clear reset */
-	{0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */
-	{0x03, 0x07},
-	{0x04, 0x10},
-	{0x05, 0x04},
-	{0x06, 0x31},
-	{0x0d, 0x02},
-	{0x0e, 0x03},
-	{0x0f, 0xfe},
-	{0x10, 0x01},
-	{0x14, 0x01},
-	{0x15, 0x98},
-	{0x16, 0x00},
-	{0x17, 0x01},
-	{0x1b, 0x05},
-	{0x1c, 0x80},
-	{0x1d, 0x00},
-	{0x1e, 0x00},
-	{0x20, 0x41},
-	{0x21, 0x15},
-	{0x27, 0x14},
-	{0x28, 0x46},
-	{0x29, 0x00},
-	{0x2a, 0xb0},
-	{0x2b, 0x73},
-	{0x2c, 0x00},
+	{0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */
+	{0x04, 0x10}, /* MPEG */
+	{0x05, 0x04}, /* MPEG */
+	{0x06, 0x31}, /* MPEG (default) */
+	{0x0b, 0x00}, /* Freq search start point (default) */
+	{0x0c, 0x00}, /* Demodulator sample gain (default) */
+	{0x0d, 0x02}, /* Frequency search range = Fsymbol / 4 (default) */
+	{0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */
+	{0x0f, 0xfe}, /* FEC search mask (all supported codes) */
+	{0x10, 0x01}, /* Default search inversion, no repeat (default) */
+	{0x16, 0x00}, /* Enable reading of frequency */
+	{0x17, 0x01}, /* Enable EsNO Ready Counter */
+	{0x1c, 0x80}, /* Enable error counter */
+	{0x20, 0x00}, /* Tuner burst clock rate = 500KHz */
+	{0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */
+	{0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */
+	{0x29, 0x00}, /* DiSEqC LNB_DC off */
+	{0x2a, 0xb0}, /* DiSEqC Parameters (default) */
+	{0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */
+	{0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */
 	{0x2d, 0x00},
 	{0x2e, 0x00},
 	{0x2f, 0x00},
 	{0x30, 0x00},
 	{0x31, 0x00},
-	{0x32, 0x8c},
-	{0x33, 0x00},
+	{0x32, 0x8c}, /* DiSEqC Parameters (default) */
+	{0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */
 	{0x34, 0x00},
-	{0x35, 0x03},
-	{0x36, 0x02},
-	{0x37, 0x3a},
-	{0x3a, 0x00},	/* Enable AGC accumulator */
-	{0x44, 0x00},
-	{0x45, 0x00},
-	{0x46, 0x05},
-	{0x56, 0x41},
-	{0x57, 0xff},
-	{0x67, 0x83},
+	{0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */
+	{0x36, 0x02}, /* DiSEqC Parameters (default) */
+	{0x37, 0x3a}, /* DiSEqC Parameters (default) */
+	{0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */
+	{0x44, 0x00}, /* Constellation (default) */
+	{0x45, 0x00}, /* Symbol count (default) */
+	{0x46, 0x0d}, /* Symbol rate estimator on (default) */
+	{0x56, 0x41}, /* Various (default) */
+	{0x57, 0xff}, /* Error Counter Window (default) */
+	{0x67, 0x83}, /* Non-DCII symbol clock */
 };
 
 static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
@@ -258,6 +236,10 @@ static int cx24123_writereg(struct cx241
 	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
 	int err;
 
+	if (debug>1)
+		printk("cx24123: %s:  write reg 0x%02x, value 0x%02x\n",
+						__FUNCTION__,reg, data);
+
 	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
 		printk("%s: writereg error(err == %i, reg == 0x%02x,"
 			 " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -274,6 +256,10 @@ static int cx24123_writelnbreg(struct cx
 	struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
 	int err;
 
+	if (debug>1)
+		printk("cx24123: %s:  writeln addr=0x08, reg 0x%02x, value 0x%02x\n",
+						__FUNCTION__,reg, data);
+
 	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
 		printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
 			 " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -303,6 +289,9 @@ static int cx24123_readreg(struct cx2412
 		return ret;
 	}
 
+	if (debug>1)
+		printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret);
+
 	return b1[0];
 }
 
@@ -313,17 +302,23 @@ static int cx24123_readlnbreg(struct cx2
 
 static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion)
 {
+	u8 nom_reg = cx24123_readreg(state, 0x0e);
+	u8 auto_reg = cx24123_readreg(state, 0x10);
+
 	switch (inversion) {
 	case INVERSION_OFF:
-		cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f);
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+		dprintk("%s:  inversion off\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg & ~0x80);
+		cx24123_writereg(state, 0x10, auto_reg | 0x80);
 		break;
 	case INVERSION_ON:
-		cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80);
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+		dprintk("%s:  inversion on\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x80);
+		cx24123_writereg(state, 0x10, auto_reg | 0x80);
 		break;
 	case INVERSION_AUTO:
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f);
+		dprintk("%s:  inversion auto\n",__FUNCTION__);
+		cx24123_writereg(state, 0x10, auto_reg & ~0x80);
 		break;
 	default:
 		return -EINVAL;
@@ -338,92 +333,191 @@ static int cx24123_get_inversion(struct 
 
 	val = cx24123_readreg(state, 0x1b) >> 7;
 
-	if (val == 0)
+	if (val == 0) {
+		dprintk("%s:  read inversion off\n",__FUNCTION__);
 		*inversion = INVERSION_OFF;
-	else
+	} else {
+		dprintk("%s:  read inversion on\n",__FUNCTION__);
 		*inversion = INVERSION_ON;
+	}
 
 	return 0;
 }
 
 static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
 {
+	u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07;
+
 	if ( (fec < FEC_NONE) || (fec > FEC_AUTO) )
 		fec = FEC_AUTO;
 
-	/* Hardware has 5/11 and 3/5 but are never unused */
 	switch (fec) {
-	case FEC_NONE:
-		return cx24123_writereg(state, 0x0f, 0x01);
 	case FEC_1_2:
-		return cx24123_writereg(state, 0x0f, 0x02);
+		dprintk("%s:  set FEC to 1/2\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x01);
+		cx24123_writereg(state, 0x0f, 0x02);
+		break;
 	case FEC_2_3:
-		return cx24123_writereg(state, 0x0f, 0x04);
+		dprintk("%s:  set FEC to 2/3\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x02);
+		cx24123_writereg(state, 0x0f, 0x04);
+		break;
 	case FEC_3_4:
-		return cx24123_writereg(state, 0x0f, 0x08);
+		dprintk("%s:  set FEC to 3/4\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x03);
+		cx24123_writereg(state, 0x0f, 0x08);
+		break;
+	case FEC_4_5:
+		dprintk("%s:  set FEC to 4/5\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x04);
+		cx24123_writereg(state, 0x0f, 0x10);
+		break;
 	case FEC_5_6:
-		return cx24123_writereg(state, 0x0f, 0x20);
+		dprintk("%s:  set FEC to 5/6\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x05);
+		cx24123_writereg(state, 0x0f, 0x20);
+		break;
+	case FEC_6_7:
+		dprintk("%s:  set FEC to 6/7\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x06);
+		cx24123_writereg(state, 0x0f, 0x40);
+		break;
 	case FEC_7_8:
-		return cx24123_writereg(state, 0x0f, 0x80);
+		dprintk("%s:  set FEC to 7/8\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x07);
+		cx24123_writereg(state, 0x0f, 0x80);
+		break;
 	case FEC_AUTO:
-		return cx24123_writereg(state, 0x0f, 0xae);
+		dprintk("%s:  set FEC to auto\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0f, 0xfe);
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
+
+	return 0;
 }
 
 static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
 {
 	int ret;
-	u8 val;
 
 	ret = cx24123_readreg (state, 0x1b);
 	if (ret < 0)
 		return ret;
-	val = ret & 0x07;
-	switch (val) {
+	ret = ret & 0x07;
+
+	switch (ret) {
 	case 1:
 		*fec = FEC_1_2;
 		break;
-	case 3:
+	case 2:
 		*fec = FEC_2_3;
 		break;
-	case 4:
+	case 3:
 		*fec = FEC_3_4;
 		break;
-	case 5:
+	case 4:
 		*fec = FEC_4_5;
 		break;
-	case 6:
+	case 5:
 		*fec = FEC_5_6;
 		break;
+	case 6:
+		*fec = FEC_6_7;
+		break;
 	case 7:
 		*fec = FEC_7_8;
 		break;
-	case 2:	/* *fec = FEC_3_5; break; */
-	case 0:	/* *fec = FEC_5_11; break; */
-		*fec = FEC_AUTO;
-		break;
 	default:
-		*fec = FEC_NONE; // can't happen
+		/* this can happen when there's no lock */
+		*fec = FEC_NONE;
 	}
 
 	return 0;
 }
 
-/* fixme: Symbol rates < 3MSps may not work because of precision loss */
+/* Approximation of closest integer of log2(a/b). It actually gives the
+   lowest integer i such that 2^i >= round(a/b) */
+static u32 cx24123_int_log2(u32 a, u32 b)
+{
+	u32 exp, nearest = 0;
+	u32 div = a / b;
+	if(a % b >= b / 2) ++div;
+	if(div < (1 << 31))
+	{
+		for(exp = 1; div > exp; nearest++)
+			exp += exp;
+	}
+	return nearest;
+}
+
 static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate)
 {
-	u32 val;
+	u32 tmp, sample_rate, ratio, sample_gain;
+	u8 pll_mult;
+
+	/*  check if symbol rate is within limits */
+	if ((srate > state->ops.info.symbol_rate_max) ||
+	    (srate < state->ops.info.symbol_rate_min))
+		return -EOPNOTSUPP;;
+
+	/* choose the sampling rate high enough for the required operation,
+	   while optimizing the power consumed by the demodulator */
+	if (srate < (XTAL*2)/2)
+		pll_mult = 2;
+	else if (srate < (XTAL*3)/2)
+		pll_mult = 3;
+	else if (srate < (XTAL*4)/2)
+		pll_mult = 4;
+	else if (srate < (XTAL*5)/2)
+		pll_mult = 5;
+	else if (srate < (XTAL*6)/2)
+		pll_mult = 6;
+	else if (srate < (XTAL*7)/2)
+		pll_mult = 7;
+	else if (srate < (XTAL*8)/2)
+		pll_mult = 8;
+	else
+		pll_mult = 9;
+
+
+	sample_rate = pll_mult * XTAL;
+
+	/*
+	    SYSSymbolRate[21:0] = (srate << 23) / sample_rate
+
+	    We have to use 32 bit unsigned arithmetic without precision loss.
+	    The maximum srate is 45000000 or 0x02AEA540. This number has
+	    only 6 clear bits on top, hence we can shift it left only 6 bits
+	    at a time. Borrowed from cx24110.c
+	*/
+
+	tmp = srate << 6;
+	ratio = tmp / sample_rate;
+
+	tmp = (tmp % sample_rate) << 6;
+	ratio = (ratio << 6) + (tmp / sample_rate);
+
+	tmp = (tmp % sample_rate) << 6;
+	ratio = (ratio << 6) + (tmp / sample_rate);
+
+	tmp = (tmp % sample_rate) << 5;
+	ratio = (ratio << 5) + (tmp / sample_rate);
+
+
+	cx24123_writereg(state, 0x01, pll_mult * 6);
 
-	val = (srate / 1185) * 100;
+	cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f );
+	cx24123_writereg(state, 0x09, (ratio >>  8) & 0xff );
+	cx24123_writereg(state, 0x0a, (ratio      ) & 0xff );
 
-	/* Compensate for scaling up, by removing 17 symbols per 1Msps */
-	val = val - (17 * (srate / 1000000));
+	/* also set the demodulator sample gain */
+	sample_gain = cx24123_int_log2(sample_rate, srate);
+	tmp = cx24123_readreg(state, 0x0c) & ~0xe0;
+	cx24123_writereg(state, 0x0c, tmp | sample_gain << 5);
 
-	cx24123_writereg(state, 0x08, (val >> 16) & 0xff );
-	cx24123_writereg(state, 0x09, (val >>  8) & 0xff );
-	cx24123_writereg(state, 0x0a, (val      ) & 0xff );
+	dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", __FUNCTION__, srate, ratio, sample_rate, sample_gain);
 
 	return 0;
 }
@@ -437,6 +531,9 @@ static int cx24123_pll_calculate(struct 
 	struct cx24123_state *state = fe->demodulator_priv;
 	u32 ndiv = 0, adiv = 0, vco_div = 0;
 	int i = 0;
+	int pump = 2;
+	int band = 0;
+	int num_bands = sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]);
 
 	/* Defaults for low freq, low rate */
 	state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
@@ -444,38 +541,49 @@ static int cx24123_pll_calculate(struct 
 	state->bandselectarg = cx24123_bandselect_vals[0].progdata;
 	vco_div = cx24123_bandselect_vals[0].VCOdivider;
 
-	/* For the given symbolerate, determine the VCA and VGA programming bits */
+	/* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */
 	for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
 	{
 		if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
-				(cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
+		    (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
 			state->VCAarg = cx24123_AGC_vals[i].VCAprogdata;
 			state->VGAarg = cx24123_AGC_vals[i].VGAprogdata;
+			state->FILTune = cx24123_AGC_vals[i].FILTune;
 		}
 	}
 
-	/* For the given frequency, determine the bandselect programming bits */
-	for (i = 0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
+	/* determine the band to use */
+	if(force_band < 1 || force_band > num_bands)
 	{
-		if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
-				(cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
-			state->bandselectarg = cx24123_bandselect_vals[i].progdata;
-			vco_div = cx24123_bandselect_vals[i].VCOdivider;
+		for (i = 0; i < num_bands; i++)
+		{
+			if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
+			    (cx24123_bandselect_vals[i].freq_high >= p->frequency) )
+				band = i;
 		}
 	}
+	else
+		band = force_band - 1;
+
+	state->bandselectarg = cx24123_bandselect_vals[band].progdata;
+	vco_div = cx24123_bandselect_vals[band].VCOdivider;
+
+	/* determine the charge pump current */
+	if ( p->frequency < (cx24123_bandselect_vals[band].freq_low + cx24123_bandselect_vals[band].freq_high)/2 )
+		pump = 0x01;
+	else
+		pump = 0x02;
 
 	/* Determine the N/A dividers for the requested lband freq (in kHz). */
-	/* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */
-	ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff;
-	adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f;
+	/* Note: the reference divider R=10, frequency is in KHz, XTAL is in Hz */
+	ndiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) / 32) & 0x1ff;
+	adiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) % 32) & 0x1f;
 
 	if (adiv == 0)
-		adiv++;
+		ndiv++;
 
-	/* determine the correct pll frequency values. */
-	/* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */
-	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14);
-	state->pllarg |= (ndiv << 5) | adiv;
+	/* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */
+	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (pump << 14) | (ndiv << 5) | adiv;
 
 	return 0;
 }
@@ -489,6 +597,8 @@ static int cx24123_pll_writereg(struct d
 	struct cx24123_state *state = fe->demodulator_priv;
 	unsigned long timeout;
 
+	dprintk("%s:  pll writereg called, data=0x%08x\n",__FUNCTION__,data);
+
 	/* align the 21 bytes into to bit23 boundary */
 	data = data << 3;
 
@@ -538,6 +648,9 @@ static int cx24123_pll_writereg(struct d
 static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
 	struct cx24123_state *state = fe->demodulator_priv;
+	u8 val;
+
+	dprintk("frequency=%i\n", p->frequency);
 
 	if (cx24123_pll_calculate(fe, p) != 0) {
 		printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
@@ -552,6 +665,14 @@ static int cx24123_pll_tune(struct dvb_f
 	cx24123_pll_writereg(fe, p, state->bandselectarg);
 	cx24123_pll_writereg(fe, p, state->pllarg);
 
+	/* set the FILTUNE voltage */
+	val = cx24123_readreg(state, 0x28) & ~0x3;
+	cx24123_writereg(state, 0x27, state->FILTune >> 2);
+	cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
+
+	dprintk("%s:  pll tune VCA=%d, band=%d, pll=%d\n",__FUNCTION__,state->VCAarg,
+			state->bandselectarg,state->pllarg);
+
 	return 0;
 }
 
@@ -560,6 +681,8 @@ static int cx24123_initfe(struct dvb_fro
 	struct cx24123_state *state = fe->demodulator_priv;
 	int i;
 
+	dprintk("%s:  init frontend\n",__FUNCTION__);
+
 	/* Configure the demod to a good set of defaults */
 	for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
 		cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
@@ -587,10 +710,13 @@ static int cx24123_set_voltage(struct dv
 
 		switch (voltage) {
 		case SEC_VOLTAGE_13:
+			dprintk("%s:  isl6421 voltage = 13V\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
 		case SEC_VOLTAGE_18:
+			dprintk("%s:  isl6421 voltage = 18V\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
 		case SEC_VOLTAGE_OFF:
+			dprintk("%s:  isl5421 voltage off\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x30);
 		default:
 			return -EINVAL;
@@ -624,13 +750,93 @@ static int cx24123_set_voltage(struct dv
 	return 0;
 }
 
-static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
-				   struct dvb_diseqc_master_cmd *cmd)
+/* wait for diseqc queue to become ready (or timeout) */
+static void cx24123_wait_for_diseqc(struct cx24123_state *state)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(200);
+	while (!(cx24123_readreg(state, 0x29) & 0x40)) {
+		if(time_after(jiffies, timeout)) {
+			printk("%s: diseqc queue not ready, command may be lost.\n", __FUNCTION__);
+			break;
+		}
+		msleep(10);
+	}
+}
+
+static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
 {
-	/* fixme: Implement diseqc */
-	printk("%s: No support yet\n",__FUNCTION__);
+	struct cx24123_state *state = fe->demodulator_priv;
+	int i, val;
+
+	dprintk("%s:\n",__FUNCTION__);
+
+	/* check if continuous tone has been stopped */
+	if (state->config->use_isl6421)
+		val = cx24123_readlnbreg(state, 0x00) & 0x10;
+	else
+		val = cx24123_readreg(state, 0x29) & 0x10;
 
-	return -ENOTSUPP;
+
+	if (val) {
+		printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+		return -ENOTSUPP;
+	}
+
+	/* wait for diseqc queue ready */
+	cx24123_wait_for_diseqc(state);
+
+	/* select tone mode */
+	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xf8);
+
+	for (i = 0; i < cmd->msg_len; i++)
+		cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
+
+	val = cx24123_readreg(state, 0x29);
+	cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | ((cmd->msg_len-3) & 3));
+
+	/* wait for diseqc message to finish sending */
+	cx24123_wait_for_diseqc(state);
+
+	return 0;
+}
+
+static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	int val;
+
+	dprintk("%s:\n", __FUNCTION__);
+
+	/* check if continuous tone has been stoped */
+	if (state->config->use_isl6421)
+		val = cx24123_readlnbreg(state, 0x00) & 0x10;
+	else
+		val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+	if (val) {
+		printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+		return -ENOTSUPP;
+	}
+
+	cx24123_wait_for_diseqc(state);
+
+	/* select tone mode */
+	val = cx24123_readreg(state, 0x2a) & 0xf8;
+	cx24123_writereg(state, 0x2a, val | 0x04);
+
+	val = cx24123_readreg(state, 0x29);
+
+	if (burst == SEC_MINI_A)
+		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00));
+	else if (burst == SEC_MINI_B)
+		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08));
+	else
+		return -EINVAL;
+
+	cx24123_wait_for_diseqc(state);
+
+	return 0;
 }
 
 static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
@@ -642,13 +848,15 @@ static int cx24123_read_status(struct dv
 
 	*status = 0;
 	if (lock & 0x01)
-		*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+		*status |= FE_HAS_SIGNAL;
+	if (sync & 0x02)
+		*status |= FE_HAS_CARRIER;
 	if (sync & 0x04)
 		*status |= FE_HAS_VITERBI;
 	if (sync & 0x08)
-		*status |= FE_HAS_CARRIER;
+		*status |= FE_HAS_SYNC;
 	if (sync & 0x80)
-		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+		*status |= FE_HAS_LOCK;
 
 	return 0;
 }
@@ -681,6 +889,8 @@ static int cx24123_read_ber(struct dvb_f
 	else
 		state->snr = 0;
 
+	dprintk("%s:  BER = %d, S/N index = %d\n",__FUNCTION__,state->lastber, state->snr);
+
 	*ber = state->lastber;
 
 	return 0;
@@ -691,6 +901,8 @@ static int cx24123_read_signal_strength(
 	struct cx24123_state *state = fe->demodulator_priv;
 	*signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */
 
+	dprintk("%s:  Signal strength = %d\n",__FUNCTION__,*signal_strength);
+
 	return 0;
 }
 
@@ -699,6 +911,8 @@ static int cx24123_read_snr(struct dvb_f
 	struct cx24123_state *state = fe->demodulator_priv;
 	*snr = state->snr;
 
+	dprintk("%s:  read S/N index = %d\n",__FUNCTION__,*snr);
+
 	return 0;
 }
 
@@ -707,6 +921,8 @@ static int cx24123_read_ucblocks(struct 
 	struct cx24123_state *state = fe->demodulator_priv;
 	*ucblocks = state->lastber;
 
+	dprintk("%s:  ucblocks (ber) = %d\n",__FUNCTION__,*ucblocks);
+
 	return 0;
 }
 
@@ -714,6 +930,8 @@ static int cx24123_set_frontend(struct d
 {
 	struct cx24123_state *state = fe->demodulator_priv;
 
+	dprintk("%s:  set_frontend\n",__FUNCTION__);
+
 	if (state->config->set_ts_params)
 		state->config->set_ts_params(fe, 0);
 
@@ -737,6 +955,8 @@ static int cx24123_get_frontend(struct d
 {
 	struct cx24123_state *state = fe->demodulator_priv;
 
+	dprintk("%s:  get_frontend\n",__FUNCTION__);
+
 	if (cx24123_get_inversion(state, &p->inversion) != 0) {
 		printk("%s: Failed to get inversion status\n",__FUNCTION__);
 		return -EREMOTEIO;
@@ -763,8 +983,10 @@ static int cx24123_set_tone(struct dvb_f
 
 		switch (tone) {
 		case SEC_TONE_ON:
+			dprintk("%s:  isl6421 sec tone on\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val | 0x10);
 		case SEC_TONE_OFF:
+			dprintk("%s:  isl6421 sec tone off\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x2f);
 		default:
 			printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
@@ -855,12 +1077,13 @@ static struct dvb_frontend_ops cx24123_o
 		.frequency_min = 950000,
 		.frequency_max = 2150000,
 		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
-		.frequency_tolerance = 29500,
+		.frequency_tolerance = 5000,
 		.symbol_rate_min = 1000000,
 		.symbol_rate_max = 45000000,
 		.caps = FE_CAN_INVERSION_AUTO |
 			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
 			FE_CAN_QPSK | FE_CAN_RECOVER
 	},
 
@@ -875,12 +1098,16 @@ static struct dvb_frontend_ops cx24123_o
 	.read_snr = cx24123_read_snr,
 	.read_ucblocks = cx24123_read_ucblocks,
 	.diseqc_send_master_cmd = cx24123_send_diseqc_msg,
+	.diseqc_send_burst = cx24123_diseqc_send_burst,
 	.set_tone = cx24123_set_tone,
 	.set_voltage = cx24123_set_voltage,
 };
 
 module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+module_param(force_band, int, 0644);
+MODULE_PARM_DESC(force_band, "Force a specific band select (1-9, default:off).");
 
 MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware");
 MODULE_AUTHOR("Steven Toth");
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index b6e2c38..791706e 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -235,8 +235,8 @@ struct dvb_pll_desc dvb_pll_tdvs_tua6034
 	.max   = 863000000,
 	.count = 3,
 	.entries = {
-		{  160000000, 44000000, 62500, 0xce, 0x01 },
-		{  455000000, 44000000, 62500, 0xce, 0x02 },
+		{  165000000, 44000000, 62500, 0xce, 0x01 },
+		{  450000000, 44000000, 62500, 0xce, 0x02 },
 		{  999999999, 44000000, 62500, 0xce, 0x04 },
 	},
 };
diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig
index 84f8f9f..48252e9 100644
--- a/drivers/media/dvb/pluto2/Kconfig
+++ b/drivers/media/dvb/pluto2/Kconfig
@@ -1,6 +1,6 @@
 config DVB_PLUTO2
 	tristate "Pluto2 cards"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 	select I2C
 	select I2C_ALGOBIT
 	select DVB_TDA1004X
diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile
index 86ca84b..ce6a9aa 100644
--- a/drivers/media/dvb/pluto2/Makefile
+++ b/drivers/media/dvb/pluto2/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_DVB_PLUTO2) = pluto2.o
+obj-$(CONFIG_DVB_PLUTO2) += pluto2.o
 
 EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 5b2aadb..b5ac7df 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,8 +1,7 @@
 config DVB_AV7110
 	tristate "AV7110 cards"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select FW_LOADER
-	select VIDEO_DEV
 	select VIDEO_SAA7146_VV
 	select DVB_VES1820
 	select DVB_VES1X93
@@ -59,7 +58,7 @@ config DVB_AV7110_OSD
 
 config DVB_BUDGET
 	tristate "Budget cards"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146
 	select DVB_STV0299
 	select DVB_VES1X93
@@ -80,7 +79,7 @@ config DVB_BUDGET
 
 config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146
 	select DVB_STV0297
 	select DVB_STV0299
@@ -100,8 +99,7 @@ config DVB_BUDGET_CI
 
 config DVB_BUDGET_AV
 	tristate "Budget cards with analog video inputs"
-	depends on DVB_CORE && PCI
-	select VIDEO_DEV
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
 	select DVB_STV0299
 	select DVB_TDA1004X
@@ -119,7 +117,7 @@ config DVB_BUDGET_AV
 
 config DVB_BUDGET_PATCH
 	tristate "AV7110 cards with Budget Patch"
-	depends on DVB_CORE && DVB_BUDGET
+	depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
 	select DVB_AV7110
 	select DVB_STV0299
 	select DVB_VES1X93
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 8efe3ce..8a7cd7d 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1190,8 +1190,6 @@ static int budget_av_attach(struct saa71
 						SAA7146_HPS_SYNC_PORT_A);
 
 		saa7113_setinput(budget_av, 0);
-	} else {
-		ciintf_init(budget_av);
 	}
 
 	/* fixme: find some sane values here... */
@@ -1211,6 +1209,10 @@ static int budget_av_attach(struct saa71
 	budget_av->budget.dvb_adapter.priv = budget_av;
 	frontend_init(budget_av);
 
+	if (!budget_av->has_saa7113) {
+		ciintf_init(budget_av);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 5f91036..e64a609 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -71,6 +71,7 @@ struct budget_ci {
 	struct tasklet_struct msp430_irq_tasklet;
 	struct tasklet_struct ciintf_irq_tasklet;
 	int slot_status;
+	int ci_irq;
 	struct dvb_ca_en50221 ca;
 	char ir_dev_name[50];
 	u8 tuner_pll_address; /* used for philips_tdm1316l configs */
@@ -276,8 +277,10 @@ static int ciintf_slot_reset(struct dvb_
 	if (slot != 0)
 		return -EINVAL;
 
-	// trigger on RISING edge during reset so we know when READY is re-asserted
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	if (budget_ci->ci_irq) {
+		// trigger on RISING edge during reset so we know when READY is re-asserted
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	}
 	budget_ci->slot_status = SLOTSTATUS_RESET;
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
 	msleep(1);
@@ -370,11 +373,50 @@ static void ciintf_interrupt(unsigned lo
 	}
 }
 
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+	unsigned int flags;
+
+	// ensure we don't get spurious IRQs during initialisation
+	if (!budget_ci->budget.ci_present)
+		return -EINVAL;
+
+	// read the CAM status
+	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+	if (flags & CICONTROL_CAMDETECT) {
+		// mark it as present if it wasn't before
+		if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+			budget_ci->slot_status = SLOTSTATUS_PRESENT;
+		}
+
+		// during a RESET, we check if we can read from IO memory to see when CAM is ready
+		if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+			if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+				budget_ci->slot_status = SLOTSTATUS_READY;
+			}
+		}
+	} else {
+		budget_ci->slot_status = SLOTSTATUS_NONE;
+	}
+
+	if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+		if (budget_ci->slot_status & SLOTSTATUS_READY) {
+			return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+		}
+		return DVB_CA_EN50221_POLL_CAM_PRESENT;
+	}
+
+	return 0;
+}
+
 static int ciintf_init(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
 	int flags;
 	int result;
+	int ci_version;
+	int ca_flags;
 
 	memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
 
@@ -382,16 +424,29 @@ static int ciintf_init(struct budget_ci 
 	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
 
 	// test if it is there
-	if ((ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0) & 0xa0) != 0xa0) {
+	ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
+	if ((ci_version & 0xa0) != 0xa0) {
 		result = -ENODEV;
 		goto error;
 	}
+
 	// determine whether a CAM is present or not
 	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
 	budget_ci->slot_status = SLOTSTATUS_NONE;
 	if (flags & CICONTROL_CAMDETECT)
 		budget_ci->slot_status = SLOTSTATUS_PRESENT;
 
+	// version 0xa2 of the CI firmware doesn't generate interrupts
+	if (ci_version == 0xa2) {
+		ca_flags = 0;
+		budget_ci->ci_irq = 0;
+	} else {
+		ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
+				DVB_CA_EN50221_FLAG_IRQ_FR |
+				DVB_CA_EN50221_FLAG_IRQ_DA;
+		budget_ci->ci_irq = 1;
+	}
+
 	// register CI interface
 	budget_ci->ca.owner = THIS_MODULE;
 	budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
@@ -401,23 +456,27 @@ static int ciintf_init(struct budget_ci 
 	budget_ci->ca.slot_reset = ciintf_slot_reset;
 	budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
 	budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
+	budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
 	budget_ci->ca.data = budget_ci;
 	if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
 					  &budget_ci->ca,
-					  DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
-					  DVB_CA_EN50221_FLAG_IRQ_FR |
-					  DVB_CA_EN50221_FLAG_IRQ_DA, 1)) != 0) {
+					  ca_flags, 1)) != 0) {
 		printk("budget_ci: CI interface detected, but initialisation failed.\n");
 		goto error;
 	}
+
 	// Setup CI slot IRQ
-	tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
-	if (budget_ci->slot_status != SLOTSTATUS_NONE) {
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
-	} else {
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	if (budget_ci->ci_irq) {
+		tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
+		if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+		} else {
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+		}
+		saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
 	}
-	saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+
+	// enable interface
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
 			       CICONTROL_RESET, 1, 0);
 
@@ -426,10 +485,12 @@ static int ciintf_init(struct budget_ci 
 	budget_ci->budget.ci_present = 1;
 
 	// forge a fake CI IRQ so the CAM state is setup correctly
-	flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
-	if (budget_ci->slot_status != SLOTSTATUS_NONE)
-		flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
-	dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+	if (budget_ci->ci_irq) {
+		flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+		if (budget_ci->slot_status != SLOTSTATUS_NONE)
+			flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
+		dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+	}
 
 	return 0;
 
@@ -443,9 +504,13 @@ static void ciintf_deinit(struct budget_
 	struct saa7146_dev *saa = budget_ci->budget.dev;
 
 	// disable CI interrupts
-	saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
-	tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+	if (budget_ci->ci_irq) {
+		saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+		tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+	}
+
+	// reset interface
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
 	msleep(1);
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
@@ -473,7 +538,7 @@ static void budget_ci_irq(struct saa7146
 	if (*isr & MASK_10)
 		ttpci_budget_irq10_handler(dev, isr);
 
-	if ((*isr & MASK_03) && (budget_ci->budget.ci_present))
+	if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
 		tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
 }
 
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 248fdc7..6ceae38 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -1507,7 +1507,11 @@ static int ttusb_probe(struct usb_interf
 
 	mutex_unlock(&ttusb->semi2c);
 
-	dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
+	if ((result = dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE)) < 0) {
+		ttusb_free_iso_urbs(ttusb);
+		kfree(ttusb);
+		return result;
+	}
 	ttusb->adapter.priv = ttusb;
 
 	/* i2c */
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d318be3..3fff757 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -7,7 +7,7 @@ menu "Radio Adapters"
 
 config RADIO_CADET
 	tristate "ADS Cadet AM/FM Tuner"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these AM/FM radio cards, and then
 	  fill in the port address below.
@@ -25,7 +25,7 @@ config RADIO_CADET
 
 config RADIO_RTRACK
 	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
@@ -59,7 +59,7 @@ config RADIO_RTRACK_PORT
 
 config RADIO_RTRACK2
 	tristate "AIMSlab RadioTrack II support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below.
@@ -82,7 +82,7 @@ config RADIO_RTRACK2_PORT
 
 config RADIO_AZTECH
 	tristate "Aztech/Packard Bell Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
@@ -106,7 +106,7 @@ config RADIO_AZTECH_PORT
 
 config RADIO_GEMTEK
 	tristate "GemTek Radio Card support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below.
@@ -131,7 +131,7 @@ config RADIO_GEMTEK_PORT
 
 config RADIO_GEMTEK_PCI
 	tristate "GemTek PCI Radio Card support"
-	depends on VIDEO_DEV && PCI
+	depends on VIDEO_V4L1 && PCI
 	---help---
 	  Choose Y here if you have this PCI FM radio card.
 
@@ -145,7 +145,7 @@ config RADIO_GEMTEK_PCI
 
 config RADIO_MAXIRADIO
 	tristate "Guillemot MAXI Radio FM 2000 radio"
-	depends on VIDEO_DEV && PCI
+	depends on VIDEO_V4L1 && PCI
 	---help---
 	  Choose Y here if you have this radio card.  This card may also be
 	  found as Gemtek PCI FM.
@@ -160,7 +160,7 @@ config RADIO_MAXIRADIO
 
 config RADIO_MAESTRO
 	tristate "Maestro on board radio"
-	depends on VIDEO_DEV
+	depends on VIDEO_V4L1
 	---help---
 	  Say Y here to directly support the on-board radio tuner on the
 	  Maestro 2 or 2E sound card.
@@ -175,7 +175,7 @@ config RADIO_MAESTRO
 
 config RADIO_MIROPCM20
 	tristate "miroSOUND PCM20 radio"
-	depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
+	depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
 	---help---
 	  Choose Y here if you have this FM radio card. You also need to say Y
 	  to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
@@ -208,7 +208,7 @@ config RADIO_MIROPCM20_RDS
 
 config RADIO_SF16FMI
 	tristate "SF16FMI Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards.  If you
 	  compile the driver into the kernel and your card is not PnP one, you
@@ -225,7 +225,7 @@ config RADIO_SF16FMI
 
 config RADIO_SF16FMR2
 	tristate "SF16FMR2 Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards.
 
@@ -239,7 +239,7 @@ config RADIO_SF16FMR2
 
 config RADIO_TERRATEC
 	tristate "TerraTec ActiveRadio ISA Standalone"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below. (TODO)
@@ -268,7 +268,7 @@ config RADIO_TERRATEC_PORT
 
 config RADIO_TRUST
 	tristate "Trust FM radio card"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	help
 	  This is a driver for the Trust FM radio cards. Say Y if you have
 	  such a card and want to use it under Linux.
@@ -286,7 +286,7 @@ config RADIO_TRUST_PORT
 
 config RADIO_TYPHOON
 	tristate "Typhoon Radio (a.k.a. EcoRadio)"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address and the frequency used for muting below.
@@ -330,7 +330,7 @@ config RADIO_TYPHOON_MUTEFREQ
 
 config RADIO_ZOLTRIX
 	tristate "Zoltrix Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 85888a8..6b41970 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -2,10 +2,10 @@ #
 # Multimedia Video device configuration
 #
 
-menu "Video For Linux"
+menu "Video Capture Adapters"
 	depends on VIDEO_DEV
 
-comment "Video Adapters"
+comment "Video Capture Adapters"
 
 config VIDEO_ADV_DEBUG
 	bool "Enable advanced debug functionality"
@@ -16,11 +16,23 @@ config VIDEO_ADV_DEBUG
 	  V4L devices.
 	  In doubt, say N.
 
+config VIDEO_VIVI
+	tristate "Virtual Video Driver"
+	depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+	select VIDEO_BUF
+	default n
+	---help---
+	  Enables a virtual video driver. This device shows a color bar
+	  and a timestamp, as a real device would generate by using V4L2
+	  api.
+	  Say Y here if you want to test video apps or debug V4L devices.
+	  In doubt, say N.
+
 source "drivers/media/video/bt8xx/Kconfig"
 
 config VIDEO_SAA6588
 	tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
-	depends on VIDEO_DEV && I2C && VIDEO_BT848
+	depends on I2C && VIDEO_BT848
 
 	help
 	  Support for  Radio Data System (RDS) decoder. This allows seeing
@@ -32,7 +44,7 @@ config VIDEO_SAA6588
 
 config VIDEO_PMS
 	tristate "Mediavision Pro Movie Studio Video For Linux"
-	depends on VIDEO_DEV && ISA
+	depends on ISA && VIDEO_V4L1
 	help
 	  Say Y if you have such a thing.
 
@@ -41,7 +53,7 @@ config VIDEO_PMS
 
 config VIDEO_PLANB
 	tristate "PlanB Video-In on PowerMac"
-	depends on PPC_PMAC && VIDEO_DEV && BROKEN
+	depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
 	help
 	  PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
 	  input hardware. If you want to experiment with this, say Y.
@@ -52,7 +64,7 @@ config VIDEO_PLANB
 
 config VIDEO_BWQCAM
 	tristate "Quickcam BW Video For Linux"
-	depends on VIDEO_DEV && PARPORT
+	depends on PARPORT && VIDEO_V4L1
 	help
 	  Say Y have if you the black and white version of the QuickCam
 	  camera. See the next option for the color version.
@@ -62,7 +74,7 @@ config VIDEO_BWQCAM
 
 config VIDEO_CQCAM
 	tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIDEO_DEV && PARPORT
+	depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
 	help
 	  This is the video4linux driver for the colour version of the
 	  Connectix QuickCam.  If you have one of these cameras, say Y here,
@@ -73,7 +85,7 @@ config VIDEO_CQCAM
 
 config VIDEO_W9966
 	tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
-	depends on PARPORT_1284 && VIDEO_DEV && PARPORT
+	depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
 	help
 	  Video4linux driver for Winbond's w9966 based Webcams.
 	  Currently tested with the LifeView FlyCam Supra.
@@ -86,7 +98,7 @@ config VIDEO_W9966
 
 config VIDEO_CPIA
 	tristate "CPiA Video For Linux"
-	depends on VIDEO_DEV
+	depends on VIDEO_V4L1
 	---help---
 	  This is the video4linux driver for cameras based on Vision's CPiA
 	  (Colour Processor Interface ASIC), such as the Creative Labs Video
@@ -123,7 +135,7 @@ source "drivers/media/video/cpia2/Kconfi
 
 config VIDEO_SAA5246A
 	tristate "SAA5246A, SAA5281 Teletext processor"
-	depends on VIDEO_DEV && I2C
+	depends on I2C && VIDEO_V4L1
 	help
 	  Support for I2C bus based teletext using the SAA5246A or SAA5281
 	  chip. Useful only if you live in Europe.
@@ -150,7 +162,7 @@ config TUNER_3036
 
 config VIDEO_VINO
 	tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
-	depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL
+	depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
 	select I2C_ALGO_SGI
 	help
 	  Say Y here to build in support for the Vino video input system found
@@ -158,7 +170,7 @@ config VIDEO_VINO
 
 config VIDEO_STRADIS
 	tristate "Stradis 4:2:2 MPEG-2 video driver  (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIDEO_DEV && PCI
+	depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
 	help
 	  Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
 	  driver for PCI.  There is a product page at
@@ -166,7 +178,7 @@ config VIDEO_STRADIS
 
 config VIDEO_ZORAN
 	tristate "Zoran ZR36057/36067 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C_ALGOBIT
+	depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
 	help
 	  Say Y for support for MJPEG capture cards based on the Zoran
 	  36057/36067 PCI controller chipset. This includes the Iomega
@@ -214,7 +226,7 @@ config VIDEO_ZORAN_LML33R10
 
 config VIDEO_ZR36120
 	tristate "Zoran ZR36120/36125 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C && BROKEN
+	depends on PCI && I2C && VIDEO_V4L1 && BROKEN
 	help
 	  Support for ZR36120/ZR36125 based frame grabber/overlay boards.
 	  This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
@@ -226,7 +238,7 @@ config VIDEO_ZR36120
 
 config VIDEO_MEYE
 	tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
-	depends on VIDEO_DEV && PCI && SONYPI
+	depends on PCI && SONYPI && VIDEO_V4L1
 	---help---
 	  This is the video4linux driver for the Motion Eye camera found
 	  in the Vaio Picturebook laptops. Please read the material in
@@ -242,7 +254,7 @@ source "drivers/media/video/saa7134/Kcon
 
 config VIDEO_MXB
 	tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
 	select VIDEO_TUNER
 	---help---
@@ -254,8 +266,9 @@ config VIDEO_MXB
 
 config VIDEO_DPC
 	tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the 'dpc7146 demonstration
 	  board' by Philips-Semiconductors. It's the reference design
@@ -268,8 +281,9 @@ config VIDEO_DPC
 
 config VIDEO_HEXIUM_ORION
 	tristate "Hexium HV-PCI6 and Orion frame grabber"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the Hexium HV-PCI6 and
 	  Orion frame grabber cards by Hexium.
@@ -279,8 +293,9 @@ config VIDEO_HEXIUM_ORION
 
 config VIDEO_HEXIUM_GEMINI
 	tristate "Hexium Gemini frame grabber"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the Hexium Gemini frame
 	  grabber card by Hexium. Please note that the Gemini Dual
@@ -293,7 +308,7 @@ source "drivers/media/video/cx88/Kconfig
 
 config VIDEO_OVCAMCHIP
 	tristate "OmniVision Camera Chip support"
-	depends on VIDEO_DEV && I2C
+	depends on I2C && VIDEO_V4L1
 	---help---
 	  Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
 	  This driver is intended to be used with the ov511 and w9968cf USB
@@ -304,7 +319,7 @@ config VIDEO_OVCAMCHIP
 
 config VIDEO_M32R_AR
 	tristate "AR devices"
-	depends on M32R
+	depends on M32R && VIDEO_V4L1
 	---help---
 	  This is a video4linux driver for the Renesas AR (Artificial Retina)
 	  camera module.
@@ -365,17 +380,17 @@ config VIDEO_WM8739
 source "drivers/media/video/cx25840/Kconfig"
 
 config VIDEO_SAA711X
-	tristate "Philips SAA7113/4/5 video decoders"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	tristate "Philips SAA7113/4/5 video decoders (OBSOLETED)"
+	depends on VIDEO_V4L1 && I2C && EXPERIMENTAL
 	---help---
-	  Support for the Philips SAA7113/4/5 video decoders.
+	  Old support for the Philips SAA7113/4 video decoders.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa7115.
 
 config VIDEO_SAA7127
 	tristate "Philips SAA7127/9 digital video encoders"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the Philips SAA7127/9 digital video encoders.
 
@@ -384,7 +399,7 @@ config VIDEO_SAA7127
 
 config VIDEO_UPD64031A
 	tristate "NEC Electronics uPD64031A Ghost Reduction"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the NEC Electronics uPD64031A Ghost Reduction
 	  video chip. It is most often found in NTSC TV cards made for
@@ -396,7 +411,7 @@ config VIDEO_UPD64031A
 
 config VIDEO_UPD64083
 	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
 	  separation video chip. It is used to improve the quality of
@@ -418,7 +433,7 @@ source "drivers/media/video/em28xx/Kconf
 
 config USB_DSBR
 	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
-	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
 	---help---
 	  Say Y here if you want to connect this type of radio to your
 	  computer's USB port. Note that the audio is not digital, and
@@ -434,7 +449,7 @@ source "drivers/media/video/et61x251/Kco
 
 config USB_OV511
 	tristate "USB OV511 Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. See <file:Documentation/video4linux/ov511.txt>
@@ -445,7 +460,7 @@ config USB_OV511
 
 config USB_SE401
 	tristate "USB SE401 Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. See <file:Documentation/video4linux/se401.txt>
@@ -458,7 +473,7 @@ source "drivers/media/video/sn9c102/Kcon
 
 config USB_STV680
 	tristate "USB STV680 (Pencam) Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. This includes the Pencam line of cameras.
@@ -470,7 +485,7 @@ config USB_STV680
 
 config USB_W9968CF
 	tristate "USB W996[87]CF JPEG Dual Mode Camera support"
-	depends on USB && VIDEO_DEV && I2C
+	depends on USB && VIDEO_V4L1 && I2C
 	select VIDEO_OVCAMCHIP
 	---help---
 	  Say Y here if you want support for cameras based on OV681 or
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index b3ea2d6..e5bf268 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,7 +10,11 @@ tuner-objs	:=	tuner-core.o tuner-types.o
 
 msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
-obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
+obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o
+
+ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
+  obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
+endif
 
 obj-$(CONFIG_VIDEO_BT848) += bt8xx/
 obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
@@ -84,4 +88,8 @@ obj-$(CONFIG_USB_IBMCAM)        += usbvi
 obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
 obj-$(CONFIG_USB_VICAM)         += usbvideo/
 
+obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+extra-cflags-$(CONFIG_VIDEO_V4L1_COMPAT) += -DCONFIG_VIDEO_V4L1_COMPAT
+
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 085477c..153f6a4 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_BT848
 	tristate "BT848 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C
+	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX
diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile
index db641a3..a096a03 100644
--- a/drivers/media/video/bt8xx/Makefile
+++ b/drivers/media/video/bt8xx/Makefile
@@ -8,5 +8,5 @@ bttv-objs      :=      bttv-driver.o btt
 
 obj-$(CONFIG_VIDEO_BT848) += bttv.o
 
-EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -Idrivers/media/video
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f209a74..2b64aa8 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2991,13 +2991,13 @@ void __devinit bttv_idcard(struct bttv *
 
 	if (UNSET != audiomux[0]) {
 		gpiobits = 0;
-		for (i = 0; i < 5; i++) {
+		for (i = 0; i < 4; i++) {
 			bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
 			gpiobits |= audiomux[i];
 		}
 	} else {
 		gpiobits = audioall;
-		for (i = 0; i < 5; i++) {
+		for (i = 0; i < 4; i++) {
 			bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
 		}
 	}
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 16323a5..afcfe71 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -233,7 +233,7 @@ bttv_risc_overlay(struct bttv *btv, stru
 		  const struct bttv_format *fmt, struct bttv_overlay *ov,
 		  int skip_even, int skip_odd)
 {
-	int instructions,rc,line,maxy,start,end,skip,nskips;
+	int dwords,rc,line,maxy,start,end,skip,nskips;
 	struct btcx_skiplist *skips;
 	u32 *rp,ri,ra;
 	u32 addr;
@@ -242,12 +242,12 @@ bttv_risc_overlay(struct bttv *btv, stru
 	if (NULL == (skips = kmalloc(sizeof(*skips) * ov->nclips,GFP_KERNEL)))
 		return -ENOMEM;
 
-	/* estimate risc mem: worst case is (clip+1) * lines instructions
+	/* estimate risc mem: worst case is (1.5*clip+1) * lines instructions
 	   + sync + jump (all 2 dwords) */
-	instructions  = (ov->nclips + 1) *
-		((skip_even || skip_odd) ? ov->w.height>>1 :  ov->w.height);
-	instructions += 2;
-	if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,instructions*8)) < 0) {
+	dwords  = (3 * ov->nclips + 2) *
+		((skip_even || skip_odd) ? (ov->w.height+1)>>1 :  ov->w.height);
+	dwords += 4;
+	if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,dwords*4)) < 0) {
 		kfree(skips);
 		return rc;
 	}
@@ -276,8 +276,6 @@ bttv_risc_overlay(struct bttv *btv, stru
 		if (line > maxy)
 			btcx_calc_skips(line, ov->w.width, &maxy,
 					skips, &nskips, ov->clips, ov->nclips);
-		else
-			nskips = 0;
 
 		/* write out risc code */
 		for (start = 0, skip = 0; start < ov->w.width; start = end) {
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
index f59ced1..1958d40 100644
--- a/drivers/media/video/cx25840/cx25840-firmware.c
+++ b/drivers/media/video/cx25840/cx25840-firmware.c
@@ -39,29 +39,12 @@ #define FWSEND 48
 
 #define FWDEV(x) &((x)->adapter->dev)
 
-static int fastfw = 1;
 static char *firmware = FWFILE;
 
-module_param(fastfw, bool, 0444);
 module_param(firmware, charp, 0444);
 
-MODULE_PARM_DESC(fastfw, "Load firmware fast [0=100MHz 1=333MHz (default)]");
 MODULE_PARM_DESC(firmware, "Firmware image [default: " FWFILE "]");
 
-static void set_i2c_delay(struct i2c_client *client, int delay)
-{
-	struct i2c_algo_bit_data *algod = client->adapter->algo_data;
-
-	/* We aren't guaranteed to be using algo_bit,
-	 * so avoid the null pointer dereference
-	 * and disable the 'fast firmware load' */
-	if (algod) {
-		algod->udelay = delay;
-	} else {
-		fastfw = 0;
-	}
-}
-
 static void start_fw_load(struct i2c_client *client)
 {
 	/* DL_ADDR_LB=0 DL_ADDR_HB=0 */
@@ -71,16 +54,10 @@ static void start_fw_load(struct i2c_cli
 	cx25840_write(client, 0x803, 0x0b);
 	/* AUTO_INC_DIS=1 */
 	cx25840_write(client, 0x000, 0x20);
-
-	if (fastfw)
-		set_i2c_delay(client, 3);
 }
 
 static void end_fw_load(struct i2c_client *client)
 {
-	if (fastfw)
-		set_i2c_delay(client, 10);
-
 	/* AUTO_INC_DIS=0 */
 	cx25840_write(client, 0x000, 0x00);
 	/* DL_ENABLE=0 */
@@ -107,30 +84,8 @@ static int fw_write(struct i2c_client *c
 	int sent;
 
 	if ((sent = i2c_master_send(client, data, size)) < size) {
-
-		if (fastfw) {
-			v4l_err(client, "333MHz i2c firmware load failed\n");
-			fastfw = 0;
-			set_i2c_delay(client, 10);
-
-			if (sent > 2) {
-				u16 dl_addr = cx25840_read(client, 0x801) << 8;
-				dl_addr |= cx25840_read(client, 0x800);
-				dl_addr -= sent - 2;
-				cx25840_write(client, 0x801, dl_addr >> 8);
-				cx25840_write(client, 0x800, dl_addr & 0xff);
-			}
-
-			if (i2c_master_send(client, data, size) < size) {
-				v4l_err(client, "100MHz i2c firmware load failed\n");
-				return -ENOSYS;
-			}
-
-		} else {
-			v4l_err(client, "firmware load i2c failure\n");
-			return -ENOSYS;
-		}
-
+		v4l_err(client, "firmware load i2c failure\n");
+		return -ENOSYS;
 	}
 
 	return 0;
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index c7042cf..f80154b 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -564,7 +564,7 @@ struct cx88_board cx88_boards[] = {
 	},
 	[CX88_BOARD_PCHDTV_HD3000] = {
 		.name           = "pcHDTV HD3000 HDTV",
-		.tuner_type     = TUNER_THOMSON_DTT7610,
+		.tuner_type     = TUNER_THOMSON_DTT761X,
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 2c3d9f1..e1092d5 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -146,9 +146,11 @@ int cx88_risc_buffer(struct pci_dev *pci
 		fields++;
 
 	/* estimate risc mem: worst case is one write per page border +
-	   one write per scan line + syncs + jump (all 2 dwords) */
-	instructions  = (bpl * lines * fields) / PAGE_SIZE + lines * fields;
-	instructions += 3 + 4;
+	   one write per scan line + syncs + jump (all 2 dwords).  Padding
+	   can cause next bpl to start close to a page border.  First DMA
+	   region may be smaller than PAGE_SIZE */
+	instructions  = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines);
+	instructions += 2;
 	if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
 		return rc;
 
@@ -176,9 +178,11 @@ int cx88_risc_databuffer(struct pci_dev 
 	int rc;
 
 	/* estimate risc mem: worst case is one write per page border +
-	   one write per scan line + syncs + jump (all 2 dwords) */
-	instructions  = (bpl * lines) / PAGE_SIZE + lines;
-	instructions += 3 + 4;
+	   one write per scan line + syncs + jump (all 2 dwords).  Here
+	   there is no padding and no sync.  First DMA region may be smaller
+	   than PAGE_SIZE */
+	instructions  = 1 + (bpl * lines) / PAGE_SIZE + lines;
+	instructions += 1;
 	if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
 		return rc;
 
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index f0ea9b5..3619a44 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -372,7 +372,7 @@ static int or51132_set_ts_param(struct d
 static struct or51132_config pchdtv_hd3000 = {
 	.demod_address    = 0x15,
 	.pll_address      = 0x61,
-	.pll_desc         = &dvb_pll_thomson_dtt7610,
+	.pll_desc         = &dvb_pll_thomson_dtt761x,
 	.set_ts_params    = or51132_set_ts_param,
 };
 #endif
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 72a417b..694d1d8 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -35,8 +35,10 @@ #include <asm/div64.h>
 #include "cx88.h"
 #include <media/v4l2-common.h>
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
 #include <linux/videodev.h>
+#endif
 
 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 5a793ae..dfb15bf 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_EM28XX
 	tristate "Empia EM2800/2820/2840 USB video capture support"
-	depends on VIDEO_DEV && USB && I2C
+	depends on VIDEO_V4L1 && USB && I2C
 	select VIDEO_BUF
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index ddc92cb..cf7cdf9 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1576,8 +1576,8 @@ #endif
 	errCode = em28xx_config(dev);
 	if (errCode) {
 		em28xx_errdev("error configuring device\n");
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1603,8 +1603,8 @@ #endif
 	dev->vdev = video_device_alloc();
 	if (NULL == dev->vdev) {
 		em28xx_errdev("cannot allocate video_device.\n");
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1612,8 +1612,8 @@ #endif
 	if (NULL == dev->vbi_dev) {
 		em28xx_errdev("cannot allocate video_device.\n");
 		kfree(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1650,8 +1650,8 @@ #endif
 		mutex_unlock(&dev->lock);
 		list_del(&dev->devlist);
 		video_device_release(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENODEV;
 	}
 
@@ -1662,8 +1662,8 @@ #endif
 		list_del(&dev->devlist);
 		video_device_release(dev->vbi_dev);
 		video_device_release(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENODEV;
 	} else {
 		printk("registered VBI\n");
diff --git a/drivers/media/video/et61x251/Kconfig b/drivers/media/video/et61x251/Kconfig
index 6c43a90..c6bff70 100644
--- a/drivers/media/video/et61x251/Kconfig
+++ b/drivers/media/video/et61x251/Kconfig
@@ -1,6 +1,6 @@
 config USB_ET61X251
 	tristate "USB ET61X[12]51 PC Camera Controller support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on Etoms ET61X151
 	  or ET61X251 PC Camera Controllers.
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 8637655..53cbc95 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,6 @@
 config USB_PWC
 	tristate "USB Philips Cameras"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y or M here if you want to use one of these Philips & OEM
 	  webcams:
diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile
index 8326684..33d6012 100644
--- a/drivers/media/video/pwc/Makefile
+++ b/drivers/media/video/pwc/Makefile
@@ -1,20 +1,3 @@
-ifneq ($(KERNELRELEASE),)
-
 pwc-objs	:= pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o
 
 obj-$(CONFIG_USB_PWC) += pwc.o
-
-else
-
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default:
-	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-
-endif
-
-clean:
-	rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c
-	rm -rf .tmp_versions
-
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 133f9e5..c271e2e 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -142,6 +142,7 @@ struct i2c_reg_value {
 static const struct i2c_reg_value saa7129_init_config_extra[] = {
 	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0x38 },
 	{ SAA7127_REG_VTRIG, 				0xfa },
+	{ 0, 0 }
 };
 
 static const struct i2c_reg_value saa7127_init_config_common[] = {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index e666a44..86eae35 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3504,6 +3504,7 @@ int saa7134_board_init1(struct saa7134_d
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+		break;
 	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
 		/* this turns the remote control chip off to work around a bug in it */
 		saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 13de055..f0c2111 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -548,6 +548,8 @@ static irqreturn_t saa7134_irq(int irq, 
 		if (report & SAA7134_IRQ_REPORT_GPIO16) {
 			switch (dev->has_remote) {
 				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
 					if  (dev->remote->mask_keydown & 0x10000) {
 						saa7134_input_irq(dev);
 					}
@@ -564,6 +566,8 @@ static irqreturn_t saa7134_irq(int irq, 
 		if (report & SAA7134_IRQ_REPORT_GPIO18) {
 			switch (dev->has_remote) {
 				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
 					if ((dev->remote->mask_keydown & 0x40000) ||
 					    (dev->remote->mask_keyup & 0x40000)) {
 						saa7134_input_irq(dev);
@@ -676,7 +680,7 @@ static int saa7134_hwinit2(struct saa713
 		SAA7134_IRQ2_INTE_PE      |
 		SAA7134_IRQ2_INTE_AR;
 
-	if (dev->has_remote == SAA7134_REMOTE_GPIO) {
+	if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
 		if (dev->remote->mask_keydown & 0x10000)
 			irq2_mask |= SAA7134_IRQ2_INTE_GPIO16;
 		else if (dev->remote->mask_keydown & 0x40000)
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index aeef80f..e4156ec 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -31,8 +31,10 @@ #include "saa7134-reg.h"
 #include "saa7134.h"
 #include <media/v4l2-common.h>
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
 #include <linux/videodev.h>
+#endif
 
 /* ------------------------------------------------------------------ */
 
diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/video/sn9c102/Kconfig
index 55f2bc1..cf552e6 100644
--- a/drivers/media/video/sn9c102/Kconfig
+++ b/drivers/media/video/sn9c102/Kconfig
@@ -1,6 +1,6 @@
 config USB_SN9C102
 	tristate "USB SN9C10x PC Camera Controller support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on SONiX SN9C101,
 	  SN9C102 or SN9C103 PC Camera Controllers.
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
index 72e0f01..a1ae036 100644
--- a/drivers/media/video/tuner-types.c
+++ b/drivers/media/video/tuner-types.c
@@ -877,8 +877,8 @@ static struct tuner_params tuner_philips
 /* ------------ TUNER_LG_TDVS_H062F - INFINEON ATSC ------------ */
 
 static struct tuner_range tuner_tua6034_ntsc_ranges[] = {
-	{ 16 * 160.00 /*MHz*/, 0x8e, 0x01 },
-	{ 16 * 455.00 /*MHz*/, 0x8e, 0x02 },
+	{ 16 * 165.00 /*MHz*/, 0x8e, 0x01 },
+	{ 16 * 450.00 /*MHz*/, 0x8e, 0x02 },
 	{ 16 * 999.99        , 0x8e, 0x04 },
 };
 
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 431c3e2..b463e99 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -218,7 +218,7 @@ hauppauge_tuner[] =
 	/* 110-119 */
 	{ TUNER_ABSENT,        "Thompson DTT75105"},
 	{ TUNER_ABSENT,        "Conexant_CX24109"},
-	{ TUNER_ABSENT,        "TCL M2523_5N_E"},
+	{ TUNER_TCL_2002N,     "TCL M2523_5N_E"},
 	{ TUNER_ABSENT,        "TCL M2523_3DB_E"},
 	{ TUNER_ABSENT,        "Philips 8275A"},
 	{ TUNER_ABSENT,        "Microtune MT2060"},
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index 08a5d20..39269a2 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_USBVIDEO
 
 config USB_VICAM
 	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
-	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +13,7 @@ config USB_VICAM
 
 config USB_IBMCAM
 	tristate "USB IBM (Xirlink) C-it Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +28,7 @@ config USB_IBMCAM
 
 config USB_KONICAWC
 	tristate "USB Konica Webcam support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you want support for webcams based on a Konica
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 5e81340..779db26 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -26,6 +26,11 @@ #include <linux/pci.h>
 #include <linux/random.h>
 #include <linux/version.h>
 #include <linux/videodev2.h>
+#include <linux/dma-mapping.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+/* Include V4L1 specific functions. Should be removed soon */
+#include <linux/videodev.h>
+#endif
 #include <linux/interrupt.h>
 #include <media/video-buf.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
index c3bf886..115833e 100644
--- a/drivers/media/video/zc0301/Kconfig
+++ b/drivers/media/video/zc0301/Kconfig
@@ -1,6 +1,6 @@
 config USB_ZC0301
 	tristate "USB ZC0301 Image Processor and Control Chip support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on the ZC0301
 	  Image Processor and Control Chip.
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index 914d62b..5dc4bee 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct
 		}
 		else
 			data->bytes_xfered =
-				(data->blocks * (1 << data->blksz_bits)) -
+				(data->blocks * data->blksz) -
 				host->pio.len;
 	}
 
@@ -575,7 +575,7 @@ static int
 au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 {
 
-	int datalen = data->blocks * (1 << data->blksz_bits);
+	int datalen = data->blocks * data->blksz;
 
 	if (dma != 0)
 		host->flags |= HOST_F_DMA;
@@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host
 	if (host->dma.len == 0)
 		return MMC_ERR_TIMEOUT;
 
-	au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+	au_writel(data->blksz - 1, HOST_BLKSIZE(host));
 
 	if (host->flags & HOST_F_DMA) {
 		int i;
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index 79358e2..a4eb1d0 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -218,8 +218,10 @@ static int imxmci_busy_wait_for_status(s
 	if(!loops)
 		return 0;
 
-	dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
-		loops, where, *pstat, stat_mask);
+	/* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+	if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+		dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+			loops, where, *pstat, stat_mask);
 	return loops;
 }
 
@@ -333,6 +335,9 @@ static void imxmci_start_cmd(struct imxm
 	WARN_ON(host->cmd != NULL);
 	host->cmd = cmd;
 
+	/* Ensure, that clock are stopped else command programming and start fails */
+	imxmci_stop_clock(host);
+
 	if (cmd->flags & MMC_RSP_BUSY)
 		cmdat |= CMD_DAT_CONT_BUSY;
 
@@ -553,7 +558,7 @@ static int imxmci_cpu_driven_data(struct
 	int trans_done = 0;
 	unsigned int stat = *pstat;
 
-	if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+	if(host->actual_bus_width != MMC_BUS_WIDTH_4)
 		burst_len = 16;
 	else
 		burst_len = 64;
@@ -591,8 +596,7 @@ static int imxmci_cpu_driven_data(struct
 			stat = MMC_STATUS;
 
 			/* Flush extra bytes from FIFO */
-			while(flush_len >= 2){
-				flush_len -= 2;
+			while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
 				i = MMC_BUFFER_ACCESS;
 				stat = MMC_STATUS;
 				stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@@ -746,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned 
 			data_dir_mask = STATUS_DATA_TRANS_DONE;
 		}
 
-		imxmci_busy_wait_for_status(host, &stat,
-				data_dir_mask,
-				50, "imxmci_tasklet_fnc data");
-
 		if(stat & data_dir_mask) {
 			clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
 			imxmci_data_done(host, stat);
@@ -865,7 +865,11 @@ static void imxmci_set_ios(struct mmc_ho
 
 		imxmci_stop_clock(host);
 		MMC_CLK_RATE = (prescaler<<3) | clk;
-		imxmci_start_clock(host);
+		/*
+		 * Under my understanding, clock should not be started there, because it would
+		 * initiate SDHC sequencer and send last or random command into card
+		 */
+		/*imxmci_start_clock(host);*/
 
 		dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
 	} else {
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 1ca2c8b..6201f30 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -951,6 +951,7 @@ static void mmc_read_scrs(struct mmc_hos
 		data.timeout_ns = card->csd.tacc_ns * 10;
 		data.timeout_clks = card->csd.tacc_clks * 10;
 		data.blksz_bits = 3;
+		data.blksz = 1 << 3;
 		data.blocks = 1;
 		data.flags = MMC_DATA_READ;
 		data.sg = &sg;
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 06bd1f4..e39cc05 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_q
 		brq.data.timeout_ns = card->csd.tacc_ns * 10;
 		brq.data.timeout_clks = card->csd.tacc_clks * 10;
 		brq.data.blksz_bits = md->block_bits;
+		brq.data.blksz = 1 << md->block_bits;
 		brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
 		brq.stop.opcode = MMC_STOP_TRANSMISSION;
 		brq.stop.arg = 0;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index f97b472..b49368f 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxa
 		nob = 0xffff;
 
 	writel(nob, host->base + MMC_NOB);
-	writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
+	writel(data->blksz, host->base + MMC_BLKLEN);
 
 	clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
 	do_div(clks, 1000000000UL);
@@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamc
 	 * data blocks as being in error.
 	 */
 	if (data->error == MMC_ERR_NONE)
-		data->bytes_xfered = data->blocks << data->blksz_bits;
+		data->bytes_xfered = data->blocks * data->blksz;
 	else
 		data->bytes_xfered = 0;
 
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 39b3d97..8167332 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbs
 	unsigned long dmaflags;
 
 	DBGF("blksz %04x blks %04x flags %08x\n",
-		1 << data->blksz_bits, data->blocks, data->flags);
+		data->blksz, data->blocks, data->flags);
 	DBGF("tsac %d ms nsac %d clk\n",
 		data->timeout_ns / 1000000, data->timeout_clks);
 
 	/*
 	 * Calculate size.
 	 */
-	host->size = data->blocks << data->blksz_bits;
+	host->size = data->blocks * data->blksz;
 
 	/*
 	 * Check timeout values for overflow.
@@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbs
 	 * Two bytes are needed for each data line.
 	 */
 	if (host->bus_width == MMC_BUS_WIDTH_1) {
-		blksize = (1 << data->blksz_bits) + 2;
+		blksize = data->blksz + 2;
 
 		wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0);
 		wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
 	} else if (host->bus_width == MMC_BUS_WIDTH_4) {
-		blksize = (1 << data->blksz_bits) + 2 * 4;
+		blksize = data->blksz + 2 * 4;
 
 		wbsd_write_index(host, WBSD_IDX_PBSMSB,
 			((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 3d30668..d8233e0 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -650,9 +650,11 @@ static int b44_alloc_rx_skb(struct b44 *
 
 	/* Hardware bug work-around, the chip is unable to do PCI DMA
 	   to/from anything above 1GB :-( */
-	if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) ||
+		mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
 		/* Sigh... */
-		pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+		if (!dma_mapping_error(mapping))
+			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 		dev_kfree_skb_any(skb);
 		skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
 		if (skb == NULL)
@@ -660,8 +662,10 @@ static int b44_alloc_rx_skb(struct b44 *
 		mapping = pci_map_single(bp->pdev, skb->data,
 					 RX_PKT_BUF_SZ,
 					 PCI_DMA_FROMDEVICE);
-		if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
-			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+		if (dma_mapping_error(mapping) ||
+			mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+			if (!dma_mapping_error(mapping))
+				pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 			dev_kfree_skb_any(skb);
 			return -ENOMEM;
 		}
@@ -967,9 +971,10 @@ static int b44_start_xmit(struct sk_buff
 	}
 
 	mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-	if (mapping + len > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
-		pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
+		if (!dma_mapping_error(mapping))
+			pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
 
 		bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
 					     GFP_ATOMIC|GFP_DMA);
@@ -978,8 +983,9 @@ static int b44_start_xmit(struct sk_buff
 
 		mapping = pci_map_single(bp->pdev, bounce_skb->data,
 					 len, PCI_DMA_TODEVICE);
-		if (mapping + len > B44_DMA_MASK) {
-			pci_unmap_single(bp->pdev, mapping,
+		if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
+			if (!dma_mapping_error(mapping))
+				pci_unmap_single(bp->pdev, mapping,
 					 len, PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(bounce_skb);
 			goto err_out;
@@ -1203,7 +1209,8 @@ static int b44_alloc_consistent(struct b
 		                             DMA_TABLE_BYTES,
 		                             DMA_BIDIRECTIONAL);
 
-		if (rx_ring_dma + size > B44_DMA_MASK) {
+		if (dma_mapping_error(rx_ring_dma) ||
+			rx_ring_dma + size > B44_DMA_MASK) {
 			kfree(rx_ring);
 			goto out_err;
 		}
@@ -1229,7 +1236,8 @@ static int b44_alloc_consistent(struct b
 		                             DMA_TABLE_BYTES,
 		                             DMA_TO_DEVICE);
 
-		if (tx_ring_dma + size > B44_DMA_MASK) {
+		if (dma_mapping_error(tx_ring_dma) ||
+			tx_ring_dma + size > B44_DMA_MASK) {
 			kfree(tx_ring);
 			goto out_err;
 		}
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ca99e2..54161ae 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -55,8 +55,8 @@ #include "bnx2_fw.h"
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.4.39"
-#define DRV_MODULE_RELDATE	"March 22, 2006"
+#define DRV_MODULE_VERSION	"1.4.40"
+#define DRV_MODULE_RELDATE	"May 22, 2006"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -2945,7 +2945,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 of
 		int buf_size)
 {
 	u32 written, offset32, len32;
-	u8 *buf, start[4], end[4];
+	u8 *buf, start[4], end[4], *flash_buffer = NULL;
 	int rc = 0;
 	int align_start, align_end;
 
@@ -2985,12 +2985,19 @@ bnx2_nvram_write(struct bnx2 *bp, u32 of
 		memcpy(buf + align_start, data_buf, buf_size);
 	}
 
+	if (bp->flash_info->buffered == 0) {
+		flash_buffer = kmalloc(264, GFP_KERNEL);
+		if (flash_buffer == NULL) {
+			rc = -ENOMEM;
+			goto nvram_write_end;
+		}
+	}
+
 	written = 0;
 	while ((written < len32) && (rc == 0)) {
 		u32 page_start, page_end, data_start, data_end;
 		u32 addr, cmd_flags;
 		int i;
-		u8 flash_buffer[264];
 
 	        /* Find the page_start addr */
 		page_start = offset32 + written;
@@ -3061,7 +3068,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 of
 		}
 
 		/* Loop to write the new data from data_start to data_end */
-		for (addr = data_start; addr < data_end; addr += 4, i++) {
+		for (addr = data_start; addr < data_end; addr += 4, i += 4) {
 			if ((addr == page_end - 4) ||
 				((bp->flash_info->buffered) &&
 				 (addr == data_end - 4))) {
@@ -3109,6 +3116,9 @@ bnx2_nvram_write(struct bnx2 *bp, u32 of
 	}
 
 nvram_write_end:
+	if (bp->flash_info->buffered == 0)
+		kfree(flash_buffer);
+
 	if (align_start || align_end)
 		kfree(buf);
 	return rc;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 1ddefd2..038447f 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -53,6 +53,7 @@ #define DRV_NAME	"D-Link DL2000-based li
 #define DRV_VERSION	"v1.17b"
 #define DRV_RELDATE	"2006/03/10"
 #include "dl2k.h"
+#include <linux/dma-mapping.h>
 
 static char version[] __devinitdata =
       KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";	
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index f7235c9..705e122 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2891,78 +2891,6 @@ static int nv_open(struct net_device *de
 		goto out_drain;
 	}
 
-	if (np->msi_flags & NV_MSI_X_CAPABLE) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
-			np->msi_x_entry[i].entry = i;
-		}
-		if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
-			np->msi_flags |= NV_MSI_X_ENABLED;
-			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
-				/* Request irq for rx handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-				/* Request irq for tx handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-				/* Request irq for link and timer handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-
-				/* map interrupts to their respective vector */
-				writel(0, base + NvRegMSIXMap0);
-				writel(0, base + NvRegMSIXMap1);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
-			} else {
-				/* Request irq for all interrupts */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-
-				/* map interrupts to vector 0 */
-				writel(0, base + NvRegMSIXMap0);
-				writel(0, base + NvRegMSIXMap1);
-			}
-		}
-	}
-	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
-		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
-			np->msi_flags |= NV_MSI_ENABLED;
-			if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-				pci_disable_msi(np->pci_dev);
-				np->msi_flags &= ~NV_MSI_ENABLED;
-				goto out_drain;
-			}
-
-			/* map interrupts to vector 0 */
-			writel(0, base + NvRegMSIMap0);
-			writel(0, base + NvRegMSIMap1);
-			/* enable msi vector 0 */
-			writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
-		}
-	}
-	if (ret != 0) {
-		if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
-			goto out_drain;
-	}
-
 	/* ask for interrupts */
 	nv_enable_hw_interrupts(dev, np->irqmask);
 
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index 6f7dce8..b67f586 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -149,6 +149,8 @@ static void enp2611_check_link_status(un
 		int status;
 
 		dev = nds[i];
+		if (dev == NULL)
+			continue;
 
 		status = pm3386_is_link_up(i);
 		if (status && !netif_carrier_ok(dev)) {
@@ -191,6 +193,7 @@ static void enp2611_set_port_admin_statu
 
 static int __init enp2611_init_module(void)
 { 
+	int ports;
 	int i;
 
 	if (!machine_is_enp2611())
@@ -199,7 +202,8 @@ static int __init enp2611_init_module(vo
 	caleb_reset();
 	pm3386_reset();
 
-	for (i = 0; i < 3; i++) {
+	ports = pm3386_port_count();
+	for (i = 0; i < ports; i++) {
 		nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
 		if (nds[i] == NULL) {
 			while (--i >= 0)
@@ -215,9 +219,10 @@ static int __init enp2611_init_module(vo
 
 	ixp2400_msf_init(&enp2611_msf_parameters);
 
-	if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
-		for (i = 0; i < 3; i++)
-			free_netdev(nds[i]);
+	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
+		for (i = 0; i < ports; i++)
+			if (nds[i])
+				free_netdev(nds[i]);
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c
index 5c7ab75..5224651 100644
--- a/drivers/net/ixp2000/pm3386.c
+++ b/drivers/net/ixp2000/pm3386.c
@@ -86,40 +86,53 @@ static void pm3386_port_reg_write(int po
 	pm3386_reg_write(port >> 1, reg, value);
 }
 
+int pm3386_secondary_present(void)
+{
+	return pm3386_reg_read(1, 0) == 0x3386;
+}
 
 void pm3386_reset(void)
 {
 	u8 mac[3][6];
+	int secondary;
+
+	secondary = pm3386_secondary_present();
 
 	/* Save programmed MAC addresses.  */
 	pm3386_get_mac(0, mac[0]);
 	pm3386_get_mac(1, mac[1]);
-	pm3386_get_mac(2, mac[2]);
+	if (secondary)
+		pm3386_get_mac(2, mac[2]);
 
 	/* Assert analog and digital reset.  */
 	pm3386_reg_write(0, 0x002, 0x0060);
-	pm3386_reg_write(1, 0x002, 0x0060);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0060);
 	mdelay(1);
 
 	/* Deassert analog reset.  */
 	pm3386_reg_write(0, 0x002, 0x0062);
-	pm3386_reg_write(1, 0x002, 0x0062);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0062);
 	mdelay(10);
 
 	/* Deassert digital reset.  */
 	pm3386_reg_write(0, 0x002, 0x0063);
-	pm3386_reg_write(1, 0x002, 0x0063);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0063);
 	mdelay(10);
 
 	/* Restore programmed MAC addresses.  */
 	pm3386_set_mac(0, mac[0]);
 	pm3386_set_mac(1, mac[1]);
-	pm3386_set_mac(2, mac[2]);
+	if (secondary)
+		pm3386_set_mac(2, mac[2]);
 
 	/* Disable carrier on all ports.  */
 	pm3386_set_carrier(0, 0);
 	pm3386_set_carrier(1, 0);
-	pm3386_set_carrier(2, 0);
+	if (secondary)
+		pm3386_set_carrier(2, 0);
 }
 
 static u16 swaph(u16 x)
@@ -127,6 +140,11 @@ static u16 swaph(u16 x)
 	return ((x << 8) | (x >> 8)) & 0xffff;
 }
 
+int pm3386_port_count(void)
+{
+	return 2 + pm3386_secondary_present();
+}
+
 void pm3386_init_port(int port)
 {
 	int pm = port >> 1;
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h
index fe92bb0..cc4183d 100644
--- a/drivers/net/ixp2000/pm3386.h
+++ b/drivers/net/ixp2000/pm3386.h
@@ -13,6 +13,7 @@ #ifndef __PM3386_H
 #define __PM3386_H
 
 void pm3386_reset(void);
+int pm3386_port_count(void);
 void pm3386_init_port(int port);
 void pm3386_get_mac(int port, u8 *mac);
 void pm3386_set_mac(int port, u8 *mac);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 448a094..2ea66ac 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1691,17 +1691,6 @@ static void do_set_multicast_list(struct
 		memset(ei_local->mcfilter, 0xFF, 8);
 	}
 
-	/* 
-	 * DP8390 manuals don't specify any magic sequence for altering
-	 * the multicast regs on an already running card. To be safe, we
-	 * ensure multicast mode is off prior to loading up the new hash
-	 * table. If this proves to be not enough, we can always resort
-	 * to stopping the NIC, loading the table and then restarting.
-	 */
-	 
-	if (netif_running(dev))
-		outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
-
 	outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
 	for(i = 0; i < 8; i++) 
 	{
@@ -1715,6 +1704,8 @@ static void do_set_multicast_list(struct
   		outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
   	else
   		outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
+
+	outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
 }
 
 /*
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index a70c2b0..5ca5a1b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -78,8 +78,7 @@ static const struct pci_device_id skge_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },	/* DGE-530T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
@@ -402,7 +401,7 @@ static int skge_set_ring_param(struct ne
 	int err;
 
 	if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
-	    p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
+	    p->tx_pending < MAX_SKB_FRAGS+1 || p->tx_pending > MAX_TX_RING_SIZE)
 		return -EINVAL;
 
 	skge->rx_ring.count = p->rx_pending;
@@ -2717,8 +2716,7 @@ static int skge_poll(struct net_device *
 		if (control & BMU_OWN)
 			break;
 
-		skb = skge_rx_get(skge, e, control, rd->status,
-				  le16_to_cpu(rd->csum2));
+		skb = skge_rx_get(skge, e, control, rd->status, rd->csum2);
 		if (likely(skb)) {
 			dev->last_rx = jiffies;
 			netif_receive_skb(skb);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index ffd267f..60779eb 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@ #endif
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.3"
+#define DRV_VERSION		"1.4"
 #define PFX			DRV_NAME " "
 
 /*
@@ -105,6 +105,7 @@ MODULE_PARM_DESC(idle_timeout, "Idle tim
 static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },	/* DGE-560T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
@@ -235,6 +236,7 @@ static int sky2_set_power_state(struct s
 		}
 
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+			sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
 			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
 			reg1 &= P_ASPM_CONTROL_MSK;
@@ -306,7 +308,7 @@ static void sky2_phy_init(struct sky2_hw
 	u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
 
 	if (sky2->autoneg == AUTONEG_ENABLE &&
-	    (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+	    !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
 		u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
 
 		ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -1020,7 +1022,25 @@ static int sky2_up(struct net_device *de
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
 	u32 ramsize, rxspace, imask;
-	int err = -ENOMEM;
+	int cap, err = -ENOMEM;
+	struct net_device *otherdev = hw->dev[sky2->port^1];
+
+	/*
+ 	 * On dual port PCI-X card, there is an problem where status
+	 * can be received out of order due to split transactions
+	 */
+	if (otherdev && netif_running(otherdev) &&
+ 	    (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+ 		struct sky2_port *osky2 = netdev_priv(otherdev);
+ 		u16 cmd;
+
+ 		cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ 		cmd &= ~PCI_X_CMD_MAX_SPLIT;
+ 		sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+
+ 		sky2->rx_csum = 0;
+ 		osky2->rx_csum = 0;
+ 	}
 
 	if (netif_msg_ifup(sky2))
 		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
@@ -1899,6 +1919,12 @@ static inline void sky2_tx_done(struct n
 	}
 }
 
+/* Is status ring empty or is there more to do? */
+static inline int sky2_more_work(const struct sky2_hw *hw)
+{
+	return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
+}
+
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
@@ -2171,19 +2197,19 @@ static int sky2_poll(struct net_device *
 	if (status & Y2_IS_CHK_TXA2)
 		sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
 
-	if (status & Y2_IS_STAT_BMU)
-		sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
 	work_done = sky2_status_intr(hw, work_limit);
 	*budget -= work_done;
 	dev0->quota -= work_done;
 
-	if (work_done >= work_limit)
+	if (status & Y2_IS_STAT_BMU)
+		sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
+	if (sky2_more_work(hw))
 		return 1;
 
 	netif_rx_complete(dev0);
 
-	status = sky2_read32(hw, B0_Y2_SP_LISR);
+	sky2_read32(hw, B0_Y2_SP_LISR);
 	return 0;
 }
 
@@ -3067,12 +3093,7 @@ #endif
 	sky2->duplex = -1;
 	sky2->speed = -1;
 	sky2->advertising = sky2_supported_modes(hw);
-
-	/* Receive checksum disabled for Yukon XL
-	 * because of observed problems with incorrect
-	 * values when multiple packets are received in one interrupt
-	 */
-	sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
+	sky2->rx_csum = 1;
 
 	spin_lock_init(&sky2->phy_lock);
 	sky2->tx_pending = TX_DEF_PENDING;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8012994..8a0bc55 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -214,6 +214,8 @@ #define RAM_BUFFER(port, reg)	(reg | (po
 enum {
 	Y2_VMAIN_AVAIL	= 1<<17,/* VMAIN available (YUKON-2 only) */
 	Y2_VAUX_AVAIL	= 1<<16,/* VAUX available (YUKON-2 only) */
+	Y2_HW_WOL_ON	= 1<<15,/* HW WOL On  (Yukon-EC Ultra A1 only) */
+	Y2_HW_WOL_OFF	= 1<<14,/* HW WOL On  (Yukon-EC Ultra A1 only) */
 	Y2_ASF_ENABLE	= 1<<13,/* ASF Unit Enable (YUKON-2 only) */
 	Y2_ASF_DISABLE	= 1<<12,/* ASF Unit Disable (YUKON-2 only) */
 	Y2_CLK_RUN_ENA	= 1<<11,/* CLK_RUN Enable  (YUKON-2 only) */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 2bd9592..49ad60b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@ #include "tg3.h"
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.57"
-#define DRV_MODULE_RELDATE	"Apr 28, 2006"
+#define DRV_MODULE_VERSION	"3.58"
+#define DRV_MODULE_RELDATE	"May 22, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -6488,6 +6488,10 @@ static void tg3_periodic_fetch_stats(str
 	TG3_STAT_ADD32(&sp->rx_frame_too_long_errors, MAC_RX_STATS_FRAME_TOO_LONG);
 	TG3_STAT_ADD32(&sp->rx_jabbers, MAC_RX_STATS_JABBERS);
 	TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
+
+	TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
+	TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+	TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
 }
 
 static void tg3_timer(unsigned long __opaque)
@@ -7653,21 +7657,23 @@ static int tg3_get_settings(struct net_d
 		cmd->supported |= (SUPPORTED_1000baseT_Half |
 				   SUPPORTED_1000baseT_Full);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
+	if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
 		cmd->supported |= (SUPPORTED_100baseT_Half |
 				  SUPPORTED_100baseT_Full |
 				  SUPPORTED_10baseT_Half |
 				  SUPPORTED_10baseT_Full |
 				  SUPPORTED_MII);
-	else
+		cmd->port = PORT_TP;
+	} else {
 		cmd->supported |= SUPPORTED_FIBRE;
+		cmd->port = PORT_FIBRE;
+	}
   
 	cmd->advertising = tp->link_config.advertising;
 	if (netif_running(dev)) {
 		cmd->speed = tp->link_config.active_speed;
 		cmd->duplex = tp->link_config.active_duplex;
 	}
-	cmd->port = 0;
 	cmd->phy_address = PHY_ADDR;
 	cmd->transceiver = 0;
 	cmd->autoneg = tp->link_config.autoneg;
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index ba05ded..136a70c 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -850,7 +850,7 @@ static void init_rxtx_rings(struct net_d
 			break;
 		skb->dev = dev;			/* Mark as being used by this device. */
 		np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
-					skb->len,PCI_DMA_FROMDEVICE);
+					np->rx_buf_sz,PCI_DMA_FROMDEVICE);
 
 		np->rx_ring[i].buffer1 = np->rx_addr[i];
 		np->rx_ring[i].status = DescOwn;
@@ -1316,7 +1316,7 @@ #endif
 			skb->dev = dev;			/* Mark as being used by this device. */
 			np->rx_addr[entry] = pci_map_single(np->pci_dev,
 							skb->data,
-							skb->len, PCI_DMA_FROMDEVICE);
+							np->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			np->rx_ring[entry].buffer1 = np->rx_addr[entry];
 		}
 		wmb();
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index a6dc53b..fdc2103 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -491,8 +491,6 @@ struct rhine_private {
 	u8 tx_thresh, rx_thresh;
 
 	struct mii_if_info mii_if;
-	struct work_struct tx_timeout_task;
-	struct work_struct check_media_task;
 	void __iomem *base;
 };
 
@@ -500,8 +498,6 @@ static int  mdio_read(struct net_device 
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
 static int  rhine_open(struct net_device *dev);
 static void rhine_tx_timeout(struct net_device *dev);
-static void rhine_tx_timeout_task(struct net_device *dev);
-static void rhine_check_media_task(struct net_device *dev);
 static int  rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
 static void rhine_tx(struct net_device *dev);
@@ -856,12 +852,6 @@ #endif
 	if (rp->quirks & rqRhineI)
 		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
 
-	INIT_WORK(&rp->tx_timeout_task,
-		  (void (*)(void *))rhine_tx_timeout_task, dev);
-
-	INIT_WORK(&rp->check_media_task,
-		  (void (*)(void *))rhine_check_media_task, dev);
-
 	/* dev->name not defined before register_netdev()! */
 	rc = register_netdev(dev);
 	if (rc)
@@ -1108,11 +1098,6 @@ static void rhine_set_carrier(struct mii
 		       netif_carrier_ok(mii->dev));
 }
 
-static void rhine_check_media_task(struct net_device *dev)
-{
-	rhine_check_media(dev, 0);
-}
-
 static void init_registers(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
@@ -1166,8 +1151,8 @@ static void rhine_disable_linkmon(void _
 	if (quirks & rqRhineI) {
 		iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR
 
-		/* Do not call from ISR! */
-		msleep(1);
+		/* Can be called from ISR. Evil. */
+		mdelay(1);
 
 		/* 0x80 must be set immediately before turning it off */
 		iowrite8(0x80, ioaddr + MIICmd);
@@ -1257,16 +1242,6 @@ static int rhine_open(struct net_device 
 static void rhine_tx_timeout(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
-
-	/*
-	 * Move bulk of work outside of interrupt context
-	 */
-	schedule_work(&rp->tx_timeout_task);
-}
-
-static void rhine_tx_timeout_task(struct net_device *dev)
-{
-	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
 
 	printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1677,7 +1652,7 @@ static void rhine_error(struct net_devic
 	spin_lock(&rp->lock);
 
 	if (intr_status & IntrLinkChange)
-		schedule_work(&rp->check_media_task);
+		rhine_check_media(dev, 0);
 	if (intr_status & IntrStatsMax) {
 		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
 		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1927,9 +1902,6 @@ static int rhine_close(struct net_device
 	spin_unlock_irq(&rp->lock);
 
 	free_irq(rp->pdev->irq, dev);
-
-	flush_scheduled_work();
-
 	free_rbufs(dev);
 	free_tbufs(dev);
 	free_ring(dev);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index e2982a8..7ed18ca 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3271,6 +3271,9 @@ static int bcm43xx_init_board(struct bcm
 	bcm43xx_sysfs_register(bcm);
 	//FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
 
+	/*FIXME: This should be handled by softmac instead. */
+	schedule_work(&bcm->softmac->associnfo.work);
+
 	assert(err == 0);
 out:
 	return err;
@@ -3946,9 +3949,6 @@ static int bcm43xx_resume(struct pci_dev
 
 	netif_device_attach(net_dev);
 	
-	/*FIXME: This should be handled by softmac instead. */
-	schedule_work(&bcm->softmac->associnfo.work);
-
 	dprintk(KERN_INFO PFX "Device resumed.\n");
 
 	return 0;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 06523e2..c2d0b09 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -812,7 +812,6 @@ static void orinoco_rx_monitor(struct ne
 	if (datalen > IEEE80211_DATA_LEN + 12) {
 		printk(KERN_DEBUG "%s: oversized monitor frame, "
 		       "data length = %d\n", dev->name, datalen);
-		err = -EIO;
 		stats->rx_length_errors++;
 		goto update_stats;
 	}
@@ -821,8 +820,7 @@ static void orinoco_rx_monitor(struct ne
 	if (!skb) {
 		printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
 		       dev->name);
-		err = -ENOMEM;
-		goto drop;
+		goto update_stats;
 	}
 
 	/* Copy the 802.11 header to the skb */
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 6917c6c..c2ecae5 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -33,13 +33,10 @@ acpi_query_osc (
 	acpi_status		status;
 	struct acpi_object_list	input;
 	union acpi_object 	in_params[4];
-	struct acpi_buffer	output;
-	union acpi_object 	out_obj;	
+	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object 	*out_obj;
 	u32			osc_dw0;
 
-	/* Setting up output buffer */
-	output.length = sizeof(out_obj) + 3*sizeof(u32);  
-	output.pointer = &out_obj;
 	
 	/* Setting up input parameters */
 	input.count = 4;
@@ -61,12 +58,15 @@ acpi_query_osc (
 			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
 		return status;
 	}
-	if (out_obj.type != ACPI_TYPE_BUFFER) {
+	out_obj = output.pointer;
+
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
 		printk(KERN_DEBUG  
 			"Evaluate _OSC returns wrong type\n");
-		return AE_TYPE;
+		status = AE_TYPE;
+		goto query_osc_out;
 	}
-	osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+	osc_dw0 = *((u32 *) out_obj->buffer.pointer);
 	if (osc_dw0) {
 		if (osc_dw0 & OSC_REQUEST_ERROR)
 			printk(KERN_DEBUG "_OSC request fails\n"); 
@@ -76,15 +76,21 @@ acpi_query_osc (
 			printk(KERN_DEBUG "_OSC invalid revision\n"); 
 		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
 			/* Update Global Control Set */
-			global_ctrlsets = *((u32 *)(out_obj.buffer.pointer+8));
-			return AE_OK;
+			global_ctrlsets = *((u32 *)(out_obj->buffer.pointer+8));
+			status = AE_OK;
+			goto query_osc_out;
 		}
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto query_osc_out;
 	}
 
 	/* Update Global Control Set */
-	global_ctrlsets = *((u32 *)(out_obj.buffer.pointer + 8));
-	return AE_OK;
+	global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
+	status = AE_OK;
+
+query_osc_out:
+	kfree(output.pointer);
+	return status;
 }
 
 
@@ -96,14 +102,10 @@ acpi_run_osc (
 	acpi_status		status;
 	struct acpi_object_list	input;
 	union acpi_object 	in_params[4];
-	struct acpi_buffer	output;
-	union acpi_object 	out_obj;	
+	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object 	*out_obj;
 	u32			osc_dw0;
 
-	/* Setting up output buffer */
-	output.length = sizeof(out_obj) + 3*sizeof(u32);  
-	output.pointer = &out_obj;
-	
 	/* Setting up input parameters */
 	input.count = 4;
 	input.pointer = in_params;
@@ -124,12 +126,14 @@ acpi_run_osc (
 			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
 		return status;
 	}
-	if (out_obj.type != ACPI_TYPE_BUFFER) {
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
 		printk(KERN_DEBUG  
 			"Evaluate _OSC returns wrong type\n");
-		return AE_TYPE;
+		status = AE_TYPE;
+		goto run_osc_out;
 	}
-	osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+	osc_dw0 = *((u32 *) out_obj->buffer.pointer);
 	if (osc_dw0) {
 		if (osc_dw0 & OSC_REQUEST_ERROR)
 			printk(KERN_DEBUG "_OSC request fails\n"); 
@@ -139,11 +143,17 @@ acpi_run_osc (
 			printk(KERN_DEBUG "_OSC invalid revision\n"); 
 		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
 			printk(KERN_DEBUG "_OSC FW not grant req. control\n");
-			return AE_SUPPORT;
+			status = AE_SUPPORT;
+			goto run_osc_out;
 		}
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto run_osc_out;
 	}
-	return AE_OK;
+	status = AE_OK;
+
+run_osc_out:
+	kfree(output.pointer);
+	return status;
 }
 
 /**
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 19e2b17..d378478 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -634,6 +634,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_V
  * non-x86 architectures (yes Via exists on PPC among other places),
  * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
  * interrupts delivered properly.
+ *
+ * Some of the on-chip devices are actually '586 devices' so they are
+ * listed here.
  */
 static void quirk_via_irq(struct pci_dev *dev)
 {
@@ -648,6 +651,10 @@ static void quirk_via_irq(struct pci_dev
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
@@ -895,6 +902,7 @@ static void __init k8t_sound_hostbridge(
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
 
+#ifndef CONFIG_ACPI_SLEEP
 /*
  * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
  * is not activated. The myth is that Asus said that they do not want the
@@ -906,8 +914,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_V
  * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 
  * becomes necessary to do this tweak in two steps -- I've chosen the Host
  * bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
  */
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;
 
 static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 {
@@ -1050,6 +1062,8 @@ static void __init asus_hides_smbus_lpc_
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6 );
 
+#endif
+
 /*
  * SiS 96x south bridge: BIOS typically hides SMBus device...
  */
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index c53db7c..738b1ef 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -426,7 +426,7 @@ static int ds_open(struct inode *inode, 
 
     if (!warning_printed) {
 	    printk(KERN_INFO "pcmcia: Detected deprecated PCMCIA ioctl "
-			"usage.\n");
+			"usage from process: %s.\n", current->comm);
 	    printk(KERN_INFO "pcmcia: This interface will soon be removed from "
 			"the kernel; please expect breakage unless you upgrade "
 			"to new tools.\n");
@@ -601,8 +601,12 @@ static int ds_ioctl(struct inode * inode
 	    ret = CS_BAD_ARGS;
 	else {
 	    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function);
-	    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
-	    pcmcia_put_dev(p_dev);
+	    if (p_dev == NULL)
+		    ret = CS_BAD_ARGS;
+	    else {
+		    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
+		    pcmcia_put_dev(p_dev);
+	    }
 	}
 	break;
     case DS_GET_FIRST_TUPLE:
@@ -632,8 +636,12 @@ static int ds_ioctl(struct inode * inode
 		    ret = CS_BAD_ARGS;
 	    else {
 		    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function);
-		    ret = pccard_get_status(s, p_dev, &buf->status);
-		    pcmcia_put_dev(p_dev);
+		    if (p_dev == NULL)
+			    ret = CS_BAD_ARGS;
+		    else {
+			    ret = pccard_get_status(s, p_dev, &buf->status);
+			    pcmcia_put_dev(p_dev);
+		    }
 	    }
 	    break;
     case DS_VALIDATE_CIS:
@@ -665,9 +673,10 @@ static int ds_ioctl(struct inode * inode
 	if (!(buf->conf_reg.Function &&
 	     (buf->conf_reg.Function >= s->functions))) {
 		struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->conf_reg.Function);
-		if (p_dev)
+		if (p_dev) {
 			ret = pcmcia_access_configuration_register(p_dev, &buf->conf_reg);
-		pcmcia_put_dev(p_dev);
+			pcmcia_put_dev(p_dev);
+		}
 	}
 	break;
     case DS_GET_FIRST_REGION:
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 16d1ea7..247ab83 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -589,7 +589,7 @@ static int pd6729_check_irq(int irq, int
 	return 0;
 }
 
-static u_int __init pd6729_isa_scan(void)
+static u_int __devinit pd6729_isa_scan(void)
 {
 	u_int mask0, mask = 0;
 	int i;
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 6c9ad92..2011567 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -141,13 +141,13 @@ static int rtc_dev_ioctl(struct inode *i
 	/* try the driver's ioctl interface */
 	if (ops->ioctl) {
 		err = ops->ioctl(class_dev->dev, cmd, arg);
-		if (err != -EINVAL)
+		if (err != -ENOIOCTLCMD)
 			return err;
 	}
 
 	/* if the driver does not provide the ioctl interface
 	 * or if that particular ioctl was not implemented
-	 * (-EINVAL), we will try to emulate here.
+	 * (-ENOIOCTLCMD), we will try to emulate here.
 	 */
 
 	switch (cmd) {
@@ -233,7 +233,7 @@ #endif
 		break;
 
 	default:
-		err = -EINVAL;
+		err = -ENOTTY;
 		break;
 	}
 
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 2bc8aad..a997529 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -247,7 +247,7 @@ static int sa1100_rtc_ioctl(struct devic
 		rtc_freq = arg;
 		return 0;
 	}
-	return -EINVAL;
+	return -ENOIOCTLCMD;
 }
 
 static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index e1f7e8e..e1fa5fe 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -71,7 +71,7 @@ static int test_rtc_ioctl(struct device 
 		return 0;
 
 	default:
-		return -EINVAL;
+		return -ENOIOCTLCMD;
 	}
 }
 
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index 4d49fd5..277596c 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -270,7 +270,7 @@ static int vr41xx_rtc_ioctl(struct devic
 		epoch = arg;
 		break;
 	default:
-		return -EINVAL;
+		return -ENOIOCTLCMD;
 	}
 
 	return 0;
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 5d6b7a5..e65da92 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1348,7 +1348,7 @@ lcs_irq(struct ccw_device *cdev, unsigne
 		index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa) 
 			- channel->ccws;
 		if ((irb->scsw.actl & SCSW_ACTL_SUSPENDED) ||
-		    (irb->scsw.cstat | SCHN_STAT_PCI))
+		    (irb->scsw.cstat & SCHN_STAT_PCI))
 			/* Bloody io subsystem tells us lies about cpa... */
 			index = (index - 1) & (LCS_NUM_BUFFS - 1);
 		while (channel->io_idx != index) {
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 383a95f..239e108 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -392,13 +392,16 @@ static int openprom_bsd_ioctl(struct ino
 			return -ENOMEM;
 		}
 
-		prom_getproperty(op.op_nodeid, str, tmp, len);
-
-		tmp[len] = '\0';
+		cnt = prom_getproperty(op.op_nodeid, str, tmp, len);
+		if (cnt <= 0) {
+			error = -EINVAL;
+		} else {
+			tmp[len] = '\0';
 
-		if (__copy_to_user(argp, &op, sizeof(op)) != 0
-		    || copy_to_user(op.op_buf, tmp, len) != 0)
-			error = -EFAULT;
+			if (__copy_to_user(argp, &op, sizeof(op)) != 0 ||
+			    copy_to_user(op.op_buf, tmp, len) != 0)
+				error = -EFAULT;
+		}
 
 		kfree(tmp);
 		kfree(str);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index bd14720..823dfa7 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -864,6 +864,9 @@ static unsigned int ata_id_xfermask(cons
 /**
  *	ata_port_queue_task - Queue port_task
  *	@ap: The ata_port to queue port_task for
+ *	@fn: workqueue function to be scheduled
+ *	@data: data value to pass to workqueue function
+ *	@delay: delay time for workqueue function
  *
  *	Schedule @fn(@data) for execution after @delay jiffies using
  *	port_task.  There is one port_task per port and it's the
@@ -2739,6 +2742,8 @@ static unsigned int ata_dev_set_xfermode
  *	ata_dev_init_params - Issue INIT DEV PARAMS command
  *	@ap: Port associated with device @dev
  *	@dev: Device to which command will be sent
+ *	@heads: Number of heads (taskfile parameter)
+ *	@sectors: Number of sectors (taskfile parameter)
  *
  *	LOCKING:
  *	Kernel thread context (may sleep)
@@ -4302,6 +4307,7 @@ int ata_device_resume(struct ata_port *a
  *	ata_device_suspend - prepare a device for suspend
  *	@ap: port the device is connected to
  *	@dev: the device to suspend
+ *	@state: target power management state
  *
  *	Flush the cache on the drive, if appropriate, then issue a
  *	standbynow command.
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index d5fdcb9..9b8bca1 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -37,7 +37,7 @@ #include <linux/libata.h>
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.6"
+#define DRV_VERSION	"0.7"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -50,6 +50,12 @@ enum {
 
 	MV_PCI_REG_BASE		= 0,
 	MV_IRQ_COAL_REG_BASE	= 0x18000,	/* 6xxx part only */
+	MV_IRQ_COAL_CAUSE		= (MV_IRQ_COAL_REG_BASE + 0x08),
+	MV_IRQ_COAL_CAUSE_LO		= (MV_IRQ_COAL_REG_BASE + 0x88),
+	MV_IRQ_COAL_CAUSE_HI		= (MV_IRQ_COAL_REG_BASE + 0x8c),
+	MV_IRQ_COAL_THRESHOLD		= (MV_IRQ_COAL_REG_BASE + 0xcc),
+	MV_IRQ_COAL_TIME_THRESHOLD	= (MV_IRQ_COAL_REG_BASE + 0xd0),
+
 	MV_SATAHC0_REG_BASE	= 0x20000,
 	MV_FLASH_CTL		= 0x1046c,
 	MV_GPIO_PORT_CTL	= 0x104f0,
@@ -302,9 +308,6 @@ struct mv_port_priv {
 	dma_addr_t		crpb_dma;
 	struct mv_sg		*sg_tbl;
 	dma_addr_t		sg_tbl_dma;
-
-	unsigned		req_producer;		/* cp of req_in_ptr */
-	unsigned		rsp_consumer;		/* cp of rsp_out_ptr */
 	u32			pp_flags;
 };
 
@@ -937,8 +940,6 @@ static int mv_port_start(struct ata_port
 	writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
 		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
-	pp->req_producer = pp->rsp_consumer = 0;
-
 	/* Don't turn on EDMA here...do it before DMA commands only.  Else
 	 * we'll be unable to send non-data, PIO, etc due to restricted access
 	 * to shadow regs.
@@ -1022,16 +1023,16 @@ static void mv_fill_sg(struct ata_queued
 	}
 }
 
-static inline unsigned mv_inc_q_index(unsigned *index)
+static inline unsigned mv_inc_q_index(unsigned index)
 {
-	*index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
-	return *index;
+	return (index + 1) & MV_MAX_Q_DEPTH_MASK;
 }
 
 static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
 {
-	*cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+	u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
 		(last ? CRQB_CMD_LAST : 0);
+	*cmdw = cpu_to_le16(tmp);
 }
 
 /**
@@ -1053,15 +1054,11 @@ static void mv_qc_prep(struct ata_queued
 	u16 *cw;
 	struct ata_taskfile *tf;
 	u16 flags = 0;
+	unsigned in_index;
 
  	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
-
 	/* Fill in command request block
 	 */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1069,13 +1066,17 @@ static void mv_qc_prep(struct ata_queued
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
 
-	pp->crqb[pp->req_producer].sg_addr =
+	/* get current queue index from hardware */
+	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+	pp->crqb[in_index].sg_addr =
 		cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
-	pp->crqb[pp->req_producer].sg_addr_hi =
+	pp->crqb[in_index].sg_addr_hi =
 		cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
-	pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+	pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
 
-	cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+	cw = &pp->crqb[in_index].ata_cmd[0];
 	tf = &qc->tf;
 
 	/* Sadly, the CRQB cannot accomodate all registers--there are
@@ -1144,16 +1145,12 @@ static void mv_qc_prep_iie(struct ata_qu
 	struct mv_port_priv *pp = ap->private_data;
 	struct mv_crqb_iie *crqb;
 	struct ata_taskfile *tf;
+	unsigned in_index;
 	u32 flags = 0;
 
  	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
-
 	/* Fill in Gen IIE command request block
 	 */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1162,7 +1159,11 @@ static void mv_qc_prep_iie(struct ata_qu
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
 
-	crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+	/* get current queue index from hardware */
+	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+	crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
 	crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
 	crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
 	crqb->flags = cpu_to_le32(flags);
@@ -1210,6 +1211,7 @@ static unsigned int mv_qc_issue(struct a
 {
 	void __iomem *port_mmio = mv_ap_base(qc->ap);
 	struct mv_port_priv *pp = qc->ap->private_data;
+	unsigned in_index;
 	u32 in_ptr;
 
 	if (ATA_PROT_DMA != qc->tf.protocol) {
@@ -1221,23 +1223,20 @@ static unsigned int mv_qc_issue(struct a
 		return ata_qc_issue_prot(qc);
 	}
 
-	in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	in_ptr   = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
 	/* until we do queuing, the queue should be empty at this point */
-	WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+	WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+		>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
-	mv_inc_q_index(&pp->req_producer);	/* now incr producer index */
+	in_index = mv_inc_q_index(in_index);	/* now incr producer index */
 
 	mv_start_dma(port_mmio, pp);
 
 	/* and write the request in pointer to kick the EDMA to life */
 	in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
-	in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+	in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
 	writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
 
 	return 0;
@@ -1260,28 +1259,26 @@ static u8 mv_get_crpb_status(struct ata_
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
+	unsigned out_index;
 	u32 out_ptr;
 	u8 ata_status;
 
-	out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	out_ptr   = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
-	/* the response consumer index should be the same as we remember it */
-	WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->rsp_consumer);
-
-	ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+	ata_status = le16_to_cpu(pp->crpb[out_index].flags)
+					>> CRPB_FLAG_STATUS_SHIFT;
 
 	/* increment our consumer index... */
-	pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+	out_index = mv_inc_q_index(out_index);
 
 	/* and, until we do NCQ, there should only be 1 CRPB waiting */
-	WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
-		  EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->rsp_consumer);
+	WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+		>> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
 	/* write out our inc'd consumer index so EDMA knows we're caught up */
 	out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
-	out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+	out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
 	writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
 	/* Return ATA status register for completed CRPB */
@@ -1291,6 +1288,7 @@ static u8 mv_get_crpb_status(struct ata_
 /**
  *      mv_err_intr - Handle error interrupts on the port
  *      @ap: ATA channel to manipulate
+ *      @reset_allowed: bool: 0 == don't trigger from reset here
  *
  *      In most cases, just clear the interrupt and move on.  However,
  *      some cases require an eDMA reset, which is done right before
@@ -1301,7 +1299,7 @@ static u8 mv_get_crpb_status(struct ata_
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_err_intr(struct ata_port *ap)
+static void mv_err_intr(struct ata_port *ap, int reset_allowed)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	u32 edma_err_cause, serr = 0;
@@ -1323,9 +1321,8 @@ static void mv_err_intr(struct ata_port 
 	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
 	/* check for fatal here and recover if needed */
-	if (EDMA_ERR_FATAL & edma_err_cause) {
+	if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
 		mv_stop_and_reset(ap);
-	}
 }
 
 /**
@@ -1374,12 +1371,12 @@ static void mv_host_intr(struct ata_host
 		struct ata_port *ap = host_set->ports[port];
 		struct mv_port_priv *pp = ap->private_data;
 
-		hard_port = port & MV_PORT_MASK;	/* range 0-3 */
+		hard_port = mv_hardport_from_port(port); /* range 0..3 */
 		handled = 0;	/* ensure ata_status is set if handled++ */
 
 		/* Note that DEV_IRQ might happen spuriously during EDMA,
-		 * and should be ignored in such cases.  We could mask it,
-		 * but it's pretty rare and may not be worth the overhead.
+		 * and should be ignored in such cases.
+		 * The cause of this is still under investigation.
 		 */ 
 		if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
 			/* EDMA: check for response queue interrupt */
@@ -1393,6 +1390,11 @@ static void mv_host_intr(struct ata_host
 				ata_status = readb((void __iomem *)
 					   ap->ioaddr.status_addr);
 				handled = 1;
+				/* ignore spurious intr if drive still BUSY */
+				if (ata_status & ATA_BUSY) {
+					ata_status = 0;
+					handled = 0;
+				}
 			}
 		}
 
@@ -1406,7 +1408,7 @@ static void mv_host_intr(struct ata_host
 			shift++;	/* skip bit 8 in the HC Main IRQ reg */
 		}
 		if ((PORT0_ERR << shift) & relevant) {
-			mv_err_intr(ap);
+			mv_err_intr(ap, 1);
 			err_mask |= AC_ERR_OTHER;
 			handled = 1;
 		}
@@ -1448,6 +1450,7 @@ static irqreturn_t mv_interrupt(int irq,
 	struct ata_host_set *host_set = dev_instance;
 	unsigned int hc, handled = 0, n_hcs;
 	void __iomem *mmio = host_set->mmio_base;
+	struct mv_host_priv *hpriv;
 	u32 irq_stat;
 
 	irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
@@ -1469,6 +1472,17 @@ static irqreturn_t mv_interrupt(int irq,
 			handled++;
 		}
 	}
+
+	hpriv = host_set->private_data;
+	if (IS_60XX(hpriv)) {
+		/* deal with the interrupt coalescing bits */
+		if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
+		}
+	}
+
 	if (PCI_ERR & irq_stat) {
 		printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
 		       readl(mmio + PCI_IRQ_CAUSE_OFS));
@@ -1867,7 +1881,8 @@ static void mv_channel_reset(struct mv_h
 
 	if (IS_60XX(hpriv)) {
 		u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
-		ifctl |= (1 << 12) | (1 << 7);
+		ifctl |= (1 << 7);		/* enable gen2i speed */
+		ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
 		writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
 	}
 
@@ -2031,11 +2046,14 @@ static void mv_eng_timeout(struct ata_po
 	       ap->host_set->mmio_base, ap, qc, qc->scsicmd,
 	       &qc->scsicmd->cmnd);
 
-	mv_err_intr(ap);
+	mv_err_intr(ap, 0);
 	mv_stop_and_reset(ap);
 
-	qc->err_mask |= AC_ERR_TIMEOUT;
-	ata_eh_qc_complete(qc);
+	WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
+	if (qc->flags & ATA_QCFLAG_ACTIVE) {
+		qc->err_mask |= AC_ERR_TIMEOUT;
+		ata_eh_qc_complete(qc);
+	}
 }
 
 /**
@@ -2229,7 +2247,8 @@ static int mv_init_host(struct pci_dev *
 			void __iomem *port_mmio = mv_port_base(mmio, port);
 
 			u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
-			ifctl |= (1 << 12);
+			ifctl |= (1 << 7);		/* enable gen2i speed */
+			ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
 			writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
 		}
 
@@ -2330,6 +2349,7 @@ static int mv_init_one(struct pci_dev *p
 	if (rc) {
 		return rc;
 	}
+	pci_set_master(pdev);
 
 	rc = pci_request_regions(pdev, DRV_NAME);
 	if (rc) {
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index d40e7c8..56cb490 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4054,7 +4054,7 @@ static int st_probe(struct device *dev)
 	}
 
 	sdev_printk(KERN_WARNING, SDp,
-		    "Attached scsi tape %s", tape_name(tpnt));
+		    "Attached scsi tape %s\n", tape_name(tpnt));
 	printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n",
 	       tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
 	       queue_dma_alignment(SDp->request_queue) + 1);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index aeb8153..17839e7 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1907,9 +1907,12 @@ #endif /* CONFIG_SERIAL_CORE_CONSOLE */
 static void uart_change_pm(struct uart_state *state, int pm_state)
 {
 	struct uart_port *port = state->port;
-	if (port->ops->pm)
-		port->ops->pm(port, pm_state, state->pm_state);
-	state->pm_state = pm_state;
+
+	if (state->pm_state != pm_state) {
+		if (port->ops->pm)
+			port->ops->pm(port, pm_state, state->pm_state);
+		state->pm_state = pm_state;
+	}
 }
 
 int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 1c4396c..2b4f965 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1730,3 +1730,4 @@ #endif
 
 module_init(sunsu_probe);
 module_exit(sunsu_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7a75fae..23334c8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,11 +75,45 @@ config SPI_BUTTERFLY
 	  inexpensive battery powered microcontroller evaluation board.
 	  This same cable can be used to flash new firmware.
 
+config SPI_MPC83xx
+	tristate "Freescale MPC83xx SPI controller"
+	depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+	select SPI_BITBANG
+	help
+	  This enables using the Freescale MPC83xx SPI controller in master
+	  mode.
+
+	  Note, this driver uniquely supports the SPI controller on the MPC83xx
+	  family of PowerPC processors.  The MPC83xx uses a simple set of shift
+	  registers for data (opposed to the CPM based descriptor model).
+
+config SPI_PXA2XX
+	tristate "PXA2xx SSP SPI master"
+	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+	help
+	  This enables using a PXA2xx SSP port as a SPI master controller.
+	  The driver can be configured to use any SSP port and additional
+	  documentation can be found a Documentation/spi/pxa2xx.
+
+config SPI_S3C24XX_GPIO
+	tristate "Samsung S3C24XX series SPI by GPIO"
+	depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL
+	help
+	  SPI driver for Samsung S3C24XX series ARM SoCs using
+	  GPIO lines to provide the SPI bus. This can be used where
+	  the inbuilt hardware cannot provide the transfer mode, or
+	  where the board is using non hardware connected pins.
 #
 # Add new SPI master controllers in alphabetical order above this line
 #
 
 
+config SPI_S3C24XX
+	tristate "Samsung S3C24XX series SPI"
+	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+	help
+	  SPI driver for Samsung S3C24XX series ARM SoCs
+
 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index c2c87e8..8f4cb67 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_SPI_MASTER)		+= spi.o
 # SPI master controller drivers (bus)
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
+obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
+obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
+obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
new file mode 100644
index 0000000..29aec77
--- /dev/null
+++ b/drivers/spi/pxa2xx_spi.c
@@ -0,0 +1,1486 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/delay.h>
+#include <asm/dma.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+
+MODULE_AUTHOR("Stephen Street");
+MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller");
+MODULE_LICENSE("GPL");
+
+#define MAX_BUSES 3
+
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+
+#define DEFINE_SSP_REG(reg, off) \
+static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
+static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); }
+
+DEFINE_SSP_REG(SSCR0, 0x00)
+DEFINE_SSP_REG(SSCR1, 0x04)
+DEFINE_SSP_REG(SSSR, 0x08)
+DEFINE_SSP_REG(SSITR, 0x0c)
+DEFINE_SSP_REG(SSDR, 0x10)
+DEFINE_SSP_REG(SSTO, 0x28)
+DEFINE_SSP_REG(SSPSP, 0x2c)
+
+#define START_STATE ((void*)0)
+#define RUNNING_STATE ((void*)1)
+#define DONE_STATE ((void*)2)
+#define ERROR_STATE ((void*)-1)
+
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
+
+struct driver_data {
+	/* Driver model hookup */
+	struct platform_device *pdev;
+
+	/* SPI framework hookup */
+	enum pxa_ssp_type ssp_type;
+	struct spi_master *master;
+
+	/* PXA hookup */
+	struct pxa2xx_spi_master *master_info;
+
+	/* DMA setup stuff */
+	int rx_channel;
+	int tx_channel;
+	u32 *null_dma_buf;
+
+	/* SSP register addresses */
+	void *ioaddr;
+	u32 ssdr_physical;
+
+	/* SSP masks*/
+	u32 dma_cr1;
+	u32 int_cr1;
+	u32 clear_sr;
+	u32 mask_sr;
+
+	/* Driver message queue */
+	struct workqueue_struct	*workqueue;
+	struct work_struct pump_messages;
+	spinlock_t lock;
+	struct list_head queue;
+	int busy;
+	int run;
+
+	/* Message Transfer pump */
+	struct tasklet_struct pump_transfers;
+
+	/* Current message transfer state info */
+	struct spi_message* cur_msg;
+	struct spi_transfer* cur_transfer;
+	struct chip_data *cur_chip;
+	size_t len;
+	void *tx;
+	void *tx_end;
+	void *rx;
+	void *rx_end;
+	int dma_mapped;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+	size_t rx_map_len;
+	size_t tx_map_len;
+	u8 n_bytes;
+	u32 dma_width;
+	int cs_change;
+	void (*write)(struct driver_data *drv_data);
+	void (*read)(struct driver_data *drv_data);
+	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+struct chip_data {
+	u32 cr0;
+	u32 cr1;
+	u32 to;
+	u32 psp;
+	u32 timeout;
+	u8 n_bytes;
+	u32 dma_width;
+	u32 dma_burst_size;
+	u32 threshold;
+	u32 dma_threshold;
+	u8 enable_dma;
+	u8 bits_per_word;
+	u32 speed_hz;
+	void (*write)(struct driver_data *drv_data);
+	void (*read)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+static void pump_messages(void *data);
+
+static int flush(struct driver_data *drv_data)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	void *reg = drv_data->ioaddr;
+
+	do {
+		while (read_SSSR(reg) & SSSR_RNE) {
+			read_SSDR(reg);
+		}
+	} while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+	write_SSSR(SSSR_ROR, reg);
+
+	return limit;
+}
+
+static void restore_state(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	/* Clear status and disable clock */
+	write_SSSR(drv_data->clear_sr, reg);
+	write_SSCR0(drv_data->cur_chip->cr0 & ~SSCR0_SSE, reg);
+
+	/* Load the registers */
+	write_SSCR1(drv_data->cur_chip->cr1, reg);
+	write_SSCR0(drv_data->cur_chip->cr0, reg);
+	if (drv_data->ssp_type != PXA25x_SSP) {
+		write_SSTO(0, reg);
+		write_SSPSP(drv_data->cur_chip->psp, reg);
+	}
+}
+
+static void null_cs_control(u32 command)
+{
+}
+
+static void null_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+	u8 n_bytes = drv_data->n_bytes;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(0, reg);
+		drv_data->tx += n_bytes;
+	}
+}
+
+static void null_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+	u8 n_bytes = drv_data->n_bytes;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		read_SSDR(reg);
+		drv_data->rx += n_bytes;
+	}
+}
+
+static void u8_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u8 *)(drv_data->tx), reg);
+		++drv_data->tx;
+	}
+}
+
+static void u8_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u8 *)(drv_data->rx) = read_SSDR(reg);
+		++drv_data->rx;
+	}
+}
+
+static void u16_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u16 *)(drv_data->tx), reg);
+		drv_data->tx += 2;
+	}
+}
+
+static void u16_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u16 *)(drv_data->rx) = read_SSDR(reg);
+		drv_data->rx += 2;
+	}
+}
+static void u32_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u32 *)(drv_data->tx), reg);
+		drv_data->tx += 4;
+	}
+}
+
+static void u32_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u32 *)(drv_data->rx) = read_SSDR(reg);
+		drv_data->rx += 4;
+	}
+}
+
+static void *next_transfer(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct spi_transfer *trans = drv_data->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		drv_data->cur_transfer =
+			list_entry(trans->transfer_list.next,
+					struct spi_transfer,
+					transfer_list);
+		return RUNNING_STATE;
+	} else
+		return DONE_STATE;
+}
+
+static int map_dma_buffers(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct device *dev = &msg->spi->dev;
+
+	if (!drv_data->cur_chip->enable_dma)
+		return 0;
+
+	if (msg->is_dma_mapped)
+		return  drv_data->rx_dma && drv_data->tx_dma;
+
+	if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
+		return 0;
+
+	/* Modify setup if rx buffer is null */
+	if (drv_data->rx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->rx = drv_data->null_dma_buf;
+		drv_data->rx_map_len = 4;
+	} else
+		drv_data->rx_map_len = drv_data->len;
+
+
+	/* Modify setup if tx buffer is null */
+	if (drv_data->tx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->tx = drv_data->null_dma_buf;
+		drv_data->tx_map_len = 4;
+	} else
+		drv_data->tx_map_len = drv_data->len;
+
+	/* Stream map the rx buffer */
+	drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
+						drv_data->rx_map_len,
+						DMA_FROM_DEVICE);
+	if (dma_mapping_error(drv_data->rx_dma))
+		return 0;
+
+	/* Stream map the tx buffer */
+	drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
+						drv_data->tx_map_len,
+						DMA_TO_DEVICE);
+
+	if (dma_mapping_error(drv_data->tx_dma)) {
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void unmap_dma_buffers(struct driver_data *drv_data)
+{
+	struct device *dev;
+
+	if (!drv_data->dma_mapped)
+		return;
+
+	if (!drv_data->cur_msg->is_dma_mapped) {
+		dev = &drv_data->cur_msg->spi->dev;
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		dma_unmap_single(dev, drv_data->tx_dma,
+					drv_data->tx_map_len, DMA_TO_DEVICE);
+	}
+
+	drv_data->dma_mapped = 0;
+}
+
+/* caller already set message->status; dma and pio irqs are blocked */
+static void giveback(struct driver_data *drv_data)
+{
+	struct spi_transfer* last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	msg = drv_data->cur_msg;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	if (!last_transfer->cs_change)
+		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+}
+
+static int wait_ssp_rx_stall(void *ioaddr)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+		cpu_relax();
+
+	return limit;
+}
+
+static int wait_dma_channel_stop(int channel)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+		cpu_relax();
+
+	return limit;
+}
+
+static void dma_handler(int channel, void *data, struct pt_regs *regs)
+{
+	struct driver_data *drv_data = data;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+	u32 irq_status = DCSR(channel) & DMA_INT_MASK;
+	u32 trailing_sssr = 0;
+
+	if (irq_status & DCSR_BUSERR) {
+
+		/* Disable interrupts, clear status and reset DMA */
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+
+		if (flush(drv_data) == 0)
+			dev_err(&drv_data->pdev->dev,
+					"dma_handler: flush fail\n");
+
+		unmap_dma_buffers(drv_data);
+
+		if (channel == drv_data->tx_channel)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: bad bus address on "
+				"tx channel %d, source %x target = %x\n",
+				channel, DSADR(channel), DTADR(channel));
+		else
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: bad bus address on "
+				"rx channel %d, source %x target = %x\n",
+				channel, DSADR(channel), DTADR(channel));
+
+		msg->state = ERROR_STATE;
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+
+	/* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
+	if ((drv_data->ssp_type == PXA25x_SSP)
+		&& (channel == drv_data->tx_channel)
+		&& (irq_status & DCSR_ENDINTR)) {
+
+		/* Wait for rx to stall */
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: ssp rx stall failed\n");
+
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: dma rx channel stop failed\n");
+
+		unmap_dma_buffers(drv_data);
+
+		/* Read trailing bytes */
+		/* Calculate number of trailing bytes, read them */
+		trailing_sssr = read_SSSR(reg);
+		if ((trailing_sssr & 0xf008) != 0xf000) {
+			drv_data->rx = drv_data->rx_end -
+					(((trailing_sssr >> 12) & 0x0f) + 1);
+			drv_data->read(drv_data);
+		}
+		msg->actual_length += drv_data->len;
+
+		/* Release chip select if requested, transfer delays are
+		 * handled in pump_transfers */
+		if (drv_data->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+		/* Move to next transfer */
+		msg->state = next_transfer(drv_data);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+}
+
+static irqreturn_t dma_transfer(struct driver_data *drv_data)
+{
+	u32 irq_status;
+	u32 trailing_sssr = 0;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+
+	irq_status = read_SSSR(reg) & drv_data->mask_sr;
+	if (irq_status & SSSR_ROR) {
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		unmap_dma_buffers(drv_data);
+
+		if (flush(drv_data) == 0)
+			dev_err(&drv_data->pdev->dev,
+					"dma_transfer: flush fail\n");
+
+		dev_warn(&drv_data->pdev->dev, "dma_transfer: fifo overun\n");
+
+		drv_data->cur_msg->state = ERROR_STATE;
+		tasklet_schedule(&drv_data->pump_transfers);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Check for false positive timeout */
+	if ((irq_status & SSSR_TINT) && DCSR(drv_data->tx_channel) & DCSR_RUN) {
+		write_SSSR(SSSR_TINT, reg);
+		return IRQ_HANDLED;
+	}
+
+	if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
+
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+
+		if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_transfer: dma rx channel stop failed\n");
+
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_transfer: ssp rx stall failed\n");
+
+		unmap_dma_buffers(drv_data);
+
+		/* Calculate number of trailing bytes, read them */
+		trailing_sssr = read_SSSR(reg);
+		if ((trailing_sssr & 0xf008) != 0xf000) {
+			drv_data->rx = drv_data->rx_end -
+					(((trailing_sssr >> 12) & 0x0f) + 1);
+			drv_data->read(drv_data);
+		}
+		msg->actual_length += drv_data->len;
+
+		/* Release chip select if requested, transfer delays are
+		 * handled in pump_transfers */
+		if (drv_data->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+		/* Move to next transfer */
+		msg->state = next_transfer(drv_data);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Opps problem detected */
+	return IRQ_NONE;
+}
+
+static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+	unsigned long limit = loops_per_jiffy << 1;
+	u32 irq_status;
+	u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
+			drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
+
+	while ((irq_status = read_SSSR(reg) & irq_mask)) {
+
+		if (irq_status & SSSR_ROR) {
+
+			/* Clear and disable interrupts */
+			write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+			write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+			if (drv_data->ssp_type != PXA25x_SSP)
+				write_SSTO(0, reg);
+			write_SSSR(drv_data->clear_sr, reg);
+
+			if (flush(drv_data) == 0)
+				dev_err(&drv_data->pdev->dev,
+					"interrupt_transfer: flush fail\n");
+
+			/* Stop the SSP */
+
+			dev_warn(&drv_data->pdev->dev,
+					"interrupt_transfer: fifo overun\n");
+
+			msg->state = ERROR_STATE;
+			tasklet_schedule(&drv_data->pump_transfers);
+
+			return IRQ_HANDLED;
+		}
+
+		/* Look for false positive timeout */
+		if ((irq_status & SSSR_TINT)
+				&& (drv_data->rx < drv_data->rx_end))
+			write_SSSR(SSSR_TINT, reg);
+
+		/* Pump data */
+		drv_data->read(drv_data);
+		drv_data->write(drv_data);
+
+		if (drv_data->tx == drv_data->tx_end) {
+			/* Disable tx interrupt */
+			write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
+			irq_mask = drv_data->mask_sr & ~SSSR_TFS;
+
+			/* PXA25x_SSP has no timeout, read trailing bytes */
+			if (drv_data->ssp_type == PXA25x_SSP) {
+				while ((read_SSSR(reg) & SSSR_BSY) && limit--)
+					drv_data->read(drv_data);
+
+				if (limit == 0)
+					dev_err(&drv_data->pdev->dev,
+						"interrupt_transfer: "
+						"trailing byte read failed\n");
+			}
+		}
+
+		if ((irq_status & SSSR_TINT)
+				|| (drv_data->rx == drv_data->rx_end)) {
+
+			/* Clear timeout */
+			write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+			if (drv_data->ssp_type != PXA25x_SSP)
+				write_SSTO(0, reg);
+			write_SSSR(drv_data->clear_sr, reg);
+
+			/* Update total byte transfered */
+			msg->actual_length += drv_data->len;
+
+			/* Release chip select if requested, transfer delays are
+			 * handled in pump_transfers */
+			if (drv_data->cs_change)
+				drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+			/* Move to next transfer */
+			msg->state = next_transfer(drv_data);
+
+			/* Schedule transfer tasklet */
+			tasklet_schedule(&drv_data->pump_transfers);
+		}
+	}
+
+	/* We did something */
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct driver_data *drv_data = (struct driver_data *)dev_id;
+	void *reg = drv_data->ioaddr;
+
+	if (!drv_data->cur_msg) {
+
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+
+		dev_err(&drv_data->pdev->dev, "bad message state "
+				"in interrupt handler");
+
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	return drv_data->transfer_handler(drv_data);
+}
+
+static void pump_transfers(unsigned long data)
+{
+	struct driver_data *drv_data = (struct driver_data *)data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip = NULL;
+	void *reg = drv_data->ioaddr;
+	u32 clk_div = 0;
+	u8 bits = 0;
+	u32 speed = 0;
+	u32 cr0;
+
+	/* Get current state information */
+	message = drv_data->cur_msg;
+	transfer = drv_data->cur_transfer;
+	chip = drv_data->cur_chip;
+
+	/* Handle for abort */
+	if (message->state == ERROR_STATE) {
+		message->status = -EIO;
+		giveback(drv_data);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == DONE_STATE) {
+		message->status = 0;
+		giveback(drv_data);
+		return;
+	}
+
+	/* Delay if requested at end of transfer*/
+	if (message->state == RUNNING_STATE) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			udelay(previous->delay_usecs);
+	}
+
+	/* Setup the transfer state based on the type of transfer */
+	if (flush(drv_data) == 0) {
+		dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
+		message->status = -EIO;
+		giveback(drv_data);
+		return;
+	}
+	drv_data->n_bytes = chip->n_bytes;
+	drv_data->dma_width = chip->dma_width;
+	drv_data->cs_control = chip->cs_control;
+	drv_data->tx = (void *)transfer->tx_buf;
+	drv_data->tx_end = drv_data->tx + transfer->len;
+	drv_data->rx = transfer->rx_buf;
+	drv_data->rx_end = drv_data->rx + transfer->len;
+	drv_data->rx_dma = transfer->rx_dma;
+	drv_data->tx_dma = transfer->tx_dma;
+	drv_data->len = transfer->len;
+	drv_data->write = drv_data->tx ? chip->write : null_writer;
+	drv_data->read = drv_data->rx ? chip->read : null_reader;
+	drv_data->cs_change = transfer->cs_change;
+
+	/* Change speed and bit per word on a per transfer */
+	if (transfer->speed_hz || transfer->bits_per_word) {
+
+		/* Disable clock */
+		write_SSCR0(chip->cr0 & ~SSCR0_SSE, reg);
+		cr0 = chip->cr0;
+		bits = chip->bits_per_word;
+		speed = chip->speed_hz;
+
+		if (transfer->speed_hz)
+			speed = transfer->speed_hz;
+
+		if (transfer->bits_per_word)
+			bits = transfer->bits_per_word;
+
+		if (reg == SSP1_VIRT)
+			clk_div = SSP1_SerClkDiv(speed);
+		else if (reg == SSP2_VIRT)
+			clk_div = SSP2_SerClkDiv(speed);
+		else if (reg == SSP3_VIRT)
+			clk_div = SSP3_SerClkDiv(speed);
+
+		if (bits <= 8) {
+			drv_data->n_bytes = 1;
+			drv_data->dma_width = DCMD_WIDTH1;
+			drv_data->read = drv_data->read != null_reader ?
+						u8_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u8_writer : null_writer;
+		} else if (bits <= 16) {
+			drv_data->n_bytes = 2;
+			drv_data->dma_width = DCMD_WIDTH2;
+			drv_data->read = drv_data->read != null_reader ?
+						u16_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u16_writer : null_writer;
+		} else if (bits <= 32) {
+			drv_data->n_bytes = 4;
+			drv_data->dma_width = DCMD_WIDTH4;
+			drv_data->read = drv_data->read != null_reader ?
+						u32_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u32_writer : null_writer;
+		}
+
+		cr0 = clk_div
+			| SSCR0_Motorola
+			| SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
+			| SSCR0_SSE
+			| (bits > 16 ? SSCR0_EDSS : 0);
+
+		/* Start it back up */
+		write_SSCR0(cr0, reg);
+	}
+
+	message->state = RUNNING_STATE;
+
+	/* Try to map dma buffer and do a dma transfer if successful */
+	if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+
+		/* Ensure we have the correct interrupt handler */
+		drv_data->transfer_handler = dma_transfer;
+
+		/* Setup rx DMA Channel */
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
+		DTADR(drv_data->rx_channel) = drv_data->rx_dma;
+		if (drv_data->rx == drv_data->null_dma_buf)
+			/* No target address increment */
+			DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+		else
+			DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
+							| DCMD_FLOWSRC
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+
+		/* Setup tx DMA Channel */
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DSADR(drv_data->tx_channel) = drv_data->tx_dma;
+		DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
+		if (drv_data->tx == drv_data->null_dma_buf)
+			/* No source address increment */
+			DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+		else
+			DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
+							| DCMD_FLOWTRG
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+
+		/* Enable dma end irqs on SSP to detect end of transfer */
+		if (drv_data->ssp_type == PXA25x_SSP)
+			DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
+
+		/* Fix me, need to handle cs polarity */
+		drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+		/* Go baby, go */
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->rx_channel) |= DCSR_RUN;
+		DCSR(drv_data->tx_channel) |= DCSR_RUN;
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(chip->timeout, reg);
+		write_SSCR1(chip->cr1
+				| chip->dma_threshold
+				| drv_data->dma_cr1,
+				reg);
+	} else {
+		/* Ensure we have the correct interrupt handler	*/
+		drv_data->transfer_handler = interrupt_transfer;
+
+		/* Fix me, need to handle cs polarity */
+		drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+		/* Go baby, go */
+		write_SSSR(drv_data->clear_sr, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(chip->timeout, reg);
+		write_SSCR1(chip->cr1
+				| chip->threshold
+				| drv_data->int_cr1,
+				reg);
+	}
+}
+
+static void pump_messages(void *data)
+{
+	struct driver_data *drv_data = data;
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&drv_data->lock, flags);
+	if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
+		drv_data->busy = 0;
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Make sure we are not already running a message */
+	if (drv_data->cur_msg) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Extract head of queue */
+	drv_data->cur_msg = list_entry(drv_data->queue.next,
+					struct spi_message, queue);
+	list_del_init(&drv_data->cur_msg->queue);
+
+	/* Initial message state*/
+	drv_data->cur_msg->state = START_STATE;
+	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+						struct spi_transfer,
+						transfer_list);
+
+	/* Setup the SSP using the per chip configuration */
+	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+	restore_state(drv_data);
+
+	/* Mark as busy and launch transfers */
+	tasklet_schedule(&drv_data->pump_transfers);
+
+	drv_data->busy = 1;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+static int transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = START_STATE;
+
+	list_add_tail(&msg->queue, &drv_data->queue);
+
+	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
+		queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return 0;
+}
+
+static int setup(struct spi_device *spi)
+{
+	struct pxa2xx_spi_chip *chip_info = NULL;
+	struct chip_data *chip;
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned int clk_div;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if (drv_data->ssp_type != PXA25x_SSP
+			&& (spi->bits_per_word < 4 || spi->bits_per_word > 32))
+		return -EINVAL;
+	else if (spi->bits_per_word < 4 || spi->bits_per_word > 16)
+		return -EINVAL;
+
+	/* Only alloc (or use chip_info) on first setup */
+	chip = spi_get_ctldata(spi);
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip)
+			return -ENOMEM;
+
+		chip->cs_control = null_cs_control;
+		chip->enable_dma = 0;
+		chip->timeout = SSP_TIMEOUT(1000);
+		chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
+		chip->dma_burst_size = drv_data->master_info->enable_dma ?
+					DCMD_BURST8 : 0;
+
+		chip_info = spi->controller_data;
+	}
+
+	/* chip_info isn't always needed */
+	if (chip_info) {
+		if (chip_info->cs_control)
+			chip->cs_control = chip_info->cs_control;
+
+		chip->timeout = SSP_TIMEOUT(chip_info->timeout_microsecs);
+
+		chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold)
+					| SSCR1_TxTresh(chip_info->tx_threshold);
+
+		chip->enable_dma = chip_info->dma_burst_size != 0
+					&& drv_data->master_info->enable_dma;
+		chip->dma_threshold = 0;
+
+		if (chip->enable_dma) {
+			if (chip_info->dma_burst_size <= 8) {
+				chip->dma_threshold = SSCR1_RxTresh(8)
+							| SSCR1_TxTresh(8);
+				chip->dma_burst_size = DCMD_BURST8;
+			} else if (chip_info->dma_burst_size <= 16) {
+				chip->dma_threshold = SSCR1_RxTresh(16)
+							| SSCR1_TxTresh(16);
+				chip->dma_burst_size = DCMD_BURST16;
+			} else {
+				chip->dma_threshold = SSCR1_RxTresh(32)
+							| SSCR1_TxTresh(32);
+				chip->dma_burst_size = DCMD_BURST32;
+			}
+		}
+
+
+		if (chip_info->enable_loopback)
+			chip->cr1 = SSCR1_LBM;
+	}
+
+	if (drv_data->ioaddr == SSP1_VIRT)
+		clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
+	else if (drv_data->ioaddr == SSP2_VIRT)
+		clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
+	else if (drv_data->ioaddr == SSP3_VIRT)
+		clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
+	else
+		return -ENODEV;
+	chip->speed_hz = spi->max_speed_hz;
+
+	chip->cr0 = clk_div
+			| SSCR0_Motorola
+			| SSCR0_DataSize(spi->bits_per_word > 16 ?
+				spi->bits_per_word - 16 : spi->bits_per_word)
+			| SSCR0_SSE
+			| (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
+	chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
+			| (((spi->mode & SPI_CPOL) != 0) << 3);
+
+	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
+	if (drv_data->ssp_type != PXA25x_SSP)
+		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+				spi->bits_per_word,
+				(CLOCK_SPEED_HZ)
+					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+				spi->mode & 0x3);
+	else
+		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+				spi->bits_per_word,
+				(CLOCK_SPEED_HZ/2)
+					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+				spi->mode & 0x3);
+
+	if (spi->bits_per_word <= 8) {
+		chip->n_bytes = 1;
+		chip->dma_width = DCMD_WIDTH1;
+		chip->read = u8_reader;
+		chip->write = u8_writer;
+	} else if (spi->bits_per_word <= 16) {
+		chip->n_bytes = 2;
+		chip->dma_width = DCMD_WIDTH2;
+		chip->read = u16_reader;
+		chip->write = u16_writer;
+	} else if (spi->bits_per_word <= 32) {
+		chip->cr0 |= SSCR0_EDSS;
+		chip->n_bytes = 4;
+		chip->dma_width = DCMD_WIDTH4;
+		chip->read = u32_reader;
+		chip->write = u32_writer;
+	} else {
+		dev_err(&spi->dev, "invalid wordsize\n");
+		kfree(chip);
+		return -ENODEV;
+	}
+	chip->bits_per_word = spi->bits_per_word;
+
+	spi_set_ctldata(spi, chip);
+
+	return 0;
+}
+
+static void cleanup(const struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+
+	kfree(chip);
+}
+
+static int init_queue(struct driver_data *drv_data)
+{
+	INIT_LIST_HEAD(&drv_data->queue);
+	spin_lock_init(&drv_data->lock);
+
+	drv_data->run = QUEUE_STOPPED;
+	drv_data->busy = 0;
+
+	tasklet_init(&drv_data->pump_transfers,
+			pump_transfers,	(unsigned long)drv_data);
+
+	INIT_WORK(&drv_data->pump_messages, pump_messages, drv_data);
+	drv_data->workqueue = create_singlethread_workqueue(
+					drv_data->master->cdev.dev->bus_id);
+	if (drv_data->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int start_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -EBUSY;
+	}
+
+	drv_data->run = QUEUE_RUNNING;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	return 0;
+}
+
+static int stop_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the drv_data->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	drv_data->run = QUEUE_STOPPED;
+	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&drv_data->lock, flags);
+	}
+
+	if (!list_empty(&drv_data->queue) || drv_data->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct driver_data *drv_data)
+{
+	int status;
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(drv_data->workqueue);
+
+	return 0;
+}
+
+static int pxa2xx_spi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pxa2xx_spi_master *platform_info;
+	struct spi_master *master;
+	struct driver_data *drv_data = 0;
+	struct resource *memory_resource;
+	int irq;
+	int status = 0;
+
+	platform_info = dev->platform_data;
+
+	if (platform_info->ssp_type == SSP_UNDEFINED) {
+		dev_err(&pdev->dev, "undefined SSP\n");
+		return -ENODEV;
+	}
+
+	/* Allocate master with space for drv_data and null dma buffer */
+	master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
+	if (!master) {
+		dev_err(&pdev->dev, "can not alloc spi_master\n");
+		return -ENOMEM;
+	}
+	drv_data = spi_master_get_devdata(master);
+	drv_data->master = master;
+	drv_data->master_info = platform_info;
+	drv_data->pdev = pdev;
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = cleanup;
+	master->setup = setup;
+	master->transfer = transfer;
+
+	drv_data->ssp_type = platform_info->ssp_type;
+	drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
+						sizeof(struct driver_data)), 8);
+
+	/* Setup register addresses */
+	memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memory_resource) {
+		dev_err(&pdev->dev, "memory resources not defined\n");
+		status = -ENODEV;
+		goto out_error_master_alloc;
+	}
+
+	drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
+	drv_data->ssdr_physical = memory_resource->start + 0x00000010;
+	if (platform_info->ssp_type == PXA25x_SSP) {
+		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
+		drv_data->dma_cr1 = 0;
+		drv_data->clear_sr = SSSR_ROR;
+		drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
+	} else {
+		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
+		drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
+		drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
+		drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
+	}
+
+	/* Attach to IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "irq resource not defined\n");
+		status = -ENODEV;
+		goto out_error_master_alloc;
+	}
+
+	status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can not get IRQ\n");
+		goto out_error_master_alloc;
+	}
+
+	/* Setup DMA if requested */
+	drv_data->tx_channel = -1;
+	drv_data->rx_channel = -1;
+	if (platform_info->enable_dma) {
+
+		/* Get two DMA channels	(rx and tx) */
+		drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
+							DMA_PRIO_HIGH,
+							dma_handler,
+							drv_data);
+		if (drv_data->rx_channel < 0) {
+			dev_err(dev, "problem (%d) requesting rx channel\n",
+				drv_data->rx_channel);
+			status = -ENODEV;
+			goto out_error_irq_alloc;
+		}
+		drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
+							DMA_PRIO_MEDIUM,
+							dma_handler,
+							drv_data);
+		if (drv_data->tx_channel < 0) {
+			dev_err(dev, "problem (%d) requesting tx channel\n",
+				drv_data->tx_channel);
+			status = -ENODEV;
+			goto out_error_dma_alloc;
+		}
+
+		if (drv_data->ioaddr == SSP1_VIRT) {
+				DRCMRRXSSDR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSSDR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else if (drv_data->ioaddr == SSP2_VIRT) {
+				DRCMRRXSS2DR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSS2DR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else if (drv_data->ioaddr == SSP3_VIRT) {
+				DRCMRRXSS3DR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSS3DR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else {
+			dev_err(dev, "bad SSP type\n");
+			goto out_error_dma_alloc;
+		}
+	}
+
+	/* Enable SOC clock */
+	pxa_set_cken(platform_info->clock_enable, 1);
+
+	/* Load default SSP configuration */
+	write_SSCR0(0, drv_data->ioaddr);
+	write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr);
+	write_SSCR0(SSCR0_SerClkDiv(2)
+			| SSCR0_Motorola
+			| SSCR0_DataSize(8),
+			drv_data->ioaddr);
+	if (drv_data->ssp_type != PXA25x_SSP)
+		write_SSTO(0, drv_data->ioaddr);
+	write_SSPSP(0, drv_data->ioaddr);
+
+	/* Initial and start queue */
+	status = init_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem initializing queue\n");
+		goto out_error_clock_enabled;
+	}
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue\n");
+		goto out_error_clock_enabled;
+	}
+
+	/* Register with the SPI framework */
+	platform_set_drvdata(pdev, drv_data);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem registering spi master\n");
+		goto out_error_queue_alloc;
+	}
+
+	return status;
+
+out_error_queue_alloc:
+	destroy_queue(drv_data);
+
+out_error_clock_enabled:
+	pxa_set_cken(platform_info->clock_enable, 0);
+
+out_error_dma_alloc:
+	if (drv_data->tx_channel != -1)
+		pxa_free_dma(drv_data->tx_channel);
+	if (drv_data->rx_channel != -1)
+		pxa_free_dma(drv_data->rx_channel);
+
+out_error_irq_alloc:
+	free_irq(irq, drv_data);
+
+out_error_master_alloc:
+	spi_master_put(master);
+	return status;
+}
+
+static int pxa2xx_spi_remove(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int irq;
+	int status = 0;
+
+	if (!drv_data)
+		return 0;
+
+	/* Remove the queue */
+	status = destroy_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	/* Disable the SSP at the peripheral and SOC level */
+	write_SSCR0(0, drv_data->ioaddr);
+	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+	/* Release DMA */
+	if (drv_data->master_info->enable_dma) {
+		if (drv_data->ioaddr == SSP1_VIRT) {
+			DRCMRRXSSDR = 0;
+			DRCMRTXSSDR = 0;
+		} else if (drv_data->ioaddr == SSP2_VIRT) {
+			DRCMRRXSS2DR = 0;
+			DRCMRTXSS2DR = 0;
+		} else if (drv_data->ioaddr == SSP3_VIRT) {
+			DRCMRRXSS3DR = 0;
+			DRCMRTXSS3DR = 0;
+		}
+		pxa_free_dma(drv_data->tx_channel);
+		pxa_free_dma(drv_data->rx_channel);
+	}
+
+	/* Release IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0)
+		free_irq(irq, drv_data);
+
+	/* Disconnect from the SPI framework */
+	spi_unregister_master(drv_data->master);
+
+	/* Prevent double remove */
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static void pxa2xx_spi_shutdown(struct platform_device *pdev)
+{
+	int status = 0;
+
+	if ((status = pxa2xx_spi_remove(pdev)) != 0)
+		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
+}
+
+#ifdef CONFIG_PM
+static int suspend_devices(struct device *dev, void *pm_message)
+{
+	pm_message_t *state = pm_message;
+
+	if (dev->power.power_state.event != state->event) {
+		dev_warn(dev, "pm state does not match request\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Check all childern for current power state */
+	if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) {
+		dev_warn(&pdev->dev, "suspend aborted\n");
+		return -1;
+	}
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+	write_SSCR0(0, drv_data->ioaddr);
+	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+	return 0;
+}
+
+static int pxa2xx_spi_resume(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Enable the SSP clock */
+	pxa_set_cken(drv_data->master_info->clock_enable, 1);
+
+	/* Start the queue running */
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+		return status;
+	}
+
+	return 0;
+}
+#else
+#define pxa2xx_spi_suspend NULL
+#define pxa2xx_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver driver = {
+	.driver = {
+		.name = "pxa2xx-spi",
+		.bus = &platform_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe = pxa2xx_spi_probe,
+	.remove = __devexit_p(pxa2xx_spi_remove),
+	.shutdown = pxa2xx_spi_shutdown,
+	.suspend = pxa2xx_spi_suspend,
+	.resume = pxa2xx_spi_resume,
+};
+
+static int __init pxa2xx_spi_init(void)
+{
+	platform_driver_register(&driver);
+
+	return 0;
+}
+module_init(pxa2xx_spi_init);
+
+static void __exit pxa2xx_spi_exit(void)
+{
+	platform_driver_unregister(&driver);
+}
+module_exit(pxa2xx_spi_exit);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 94f5e8e..1cea4a6 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -338,18 +338,18 @@ static struct class spi_master_class = {
  * spi_alloc_master - allocate SPI master controller
  * @dev: the controller, possibly using the platform_bus
  * @size: how much driver-private data to preallocate; the pointer to this
- * 	memory is in the class_data field of the returned class_device,
+ *	memory is in the class_data field of the returned class_device,
  *	accessible with spi_master_get_devdata().
  *
  * This call is used only by SPI master controller drivers, which are the
  * only ones directly touching chip registers.  It's how they allocate
- * an spi_master structure, prior to calling spi_add_master().
+ * an spi_master structure, prior to calling spi_register_master().
  *
  * This must be called from context that can sleep.  It returns the SPI
  * master structure on success, else NULL.
  *
  * The caller is responsible for assigning the bus number and initializing
- * the master's methods before calling spi_add_master(); and (after errors
+ * the master's methods before calling spi_register_master(); and (after errors
  * adding the device) calling spi_master_put() to prevent a memory leak.
  */
 struct spi_master * __init_or_module
@@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master);
 int __init_or_module
 spi_register_master(struct spi_master *master)
 {
-	static atomic_t		dyn_bus_id = ATOMIC_INIT(0);
+	static atomic_t		dyn_bus_id = ATOMIC_INIT((1<<16) - 1);
 	struct device		*dev = master->cdev.dev;
 	int			status = -ENODEV;
 	int			dynamic = 0;
@@ -404,7 +404,7 @@ spi_register_master(struct spi_master *m
 		return -ENODEV;
 
 	/* convention:  dynamically assigned bus IDs count down from the max */
-	if (master->bus_num == 0) {
+	if (master->bus_num < 0) {
 		master->bus_num = atomic_dec_return(&dyn_bus_id);
 		dynamic = 1;
 	}
@@ -522,7 +522,8 @@ int spi_sync(struct spi_device *spi, str
 }
 EXPORT_SYMBOL_GPL(spi_sync);
 
-#define	SPI_BUFSIZ	(SMP_CACHE_BYTES)
+/* portable code must never pass more than 32 bytes */
+#define	SPI_BUFSIZ	max(32,SMP_CACHE_BYTES)
 
 static u8	*buf;
 
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index f037e55..dd2f950 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -138,6 +138,45 @@ static unsigned bitbang_txrx_32(
 	return t->len - count;
 }
 
+int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct spi_bitbang_cs	*cs = spi->controller_state;
+	u8			bits_per_word;
+	u32			hz;
+
+	if (t) {
+		bits_per_word = t->bits_per_word;
+		hz = t->speed_hz;
+	} else {
+		bits_per_word = 0;
+		hz = 0;
+	}
+
+	/* spi_transfer level calls that work per-word */
+	if (!bits_per_word)
+		bits_per_word = spi->bits_per_word;
+	if (bits_per_word <= 8)
+		cs->txrx_bufs = bitbang_txrx_8;
+	else if (bits_per_word <= 16)
+		cs->txrx_bufs = bitbang_txrx_16;
+	else if (bits_per_word <= 32)
+		cs->txrx_bufs = bitbang_txrx_32;
+	else
+		return -EINVAL;
+
+	/* nsecs = (clock period)/2 */
+	if (!hz)
+		hz = spi->max_speed_hz;
+	if (hz) {
+		cs->nsecs = (1000000000/2) / hz;
+		if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer);
+
 /**
  * spi_bitbang_setup - default setup for per-word I/O loops
  */
@@ -145,8 +184,16 @@ int spi_bitbang_setup(struct spi_device 
 {
 	struct spi_bitbang_cs	*cs = spi->controller_state;
 	struct spi_bitbang	*bitbang;
+	int			retval;
 
-	if (!spi->max_speed_hz)
+	bitbang = spi_master_get_devdata(spi->master);
+
+	/* REVISIT: some systems will want to support devices using lsb-first
+	 * bit encodings on the wire.  In pure software that would be trivial,
+	 * just bitbang_txrx_le_cphaX() routines shifting the other way, and
+	 * some hardware controllers also have this support.
+	 */
+	if ((spi->mode & SPI_LSB_FIRST) != 0)
 		return -EINVAL;
 
 	if (!cs) {
@@ -155,32 +202,20 @@ int spi_bitbang_setup(struct spi_device 
 			return -ENOMEM;
 		spi->controller_state = cs;
 	}
-	bitbang = spi_master_get_devdata(spi->master);
 
 	if (!spi->bits_per_word)
 		spi->bits_per_word = 8;
 
-	/* spi_transfer level calls that work per-word */
-	if (spi->bits_per_word <= 8)
-		cs->txrx_bufs = bitbang_txrx_8;
-	else if (spi->bits_per_word <= 16)
-		cs->txrx_bufs = bitbang_txrx_16;
-	else if (spi->bits_per_word <= 32)
-		cs->txrx_bufs = bitbang_txrx_32;
-	else
-		return -EINVAL;
-
 	/* per-word shift register access, in hardware or bitbanging */
 	cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
 	if (!cs->txrx_word)
 		return -EINVAL;
 
-	/* nsecs = (clock period)/2 */
-	cs->nsecs = (1000000000/2) / (spi->max_speed_hz);
-	if (cs->nsecs > MAX_UDELAY_MS * 1000)
-		return -EINVAL;
+	retval = spi_bitbang_setup_transfer(spi, NULL);
+	if (retval < 0)
+		return retval;
 
-	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
 			__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
 			spi->bits_per_word, 2 * cs->nsecs);
 
@@ -246,6 +281,8 @@ static void bitbang_work(void *_bitbang)
 		unsigned		tmp;
 		unsigned		cs_change;
 		int			status;
+		int			(*setup_transfer)(struct spi_device *,
+						struct spi_transfer *);
 
 		m = container_of(bitbang->queue.next, struct spi_message,
 				queue);
@@ -262,6 +299,7 @@ static void bitbang_work(void *_bitbang)
 		tmp = 0;
 		cs_change = 1;
 		status = 0;
+		setup_transfer = NULL;
 
 		list_for_each_entry (t, &m->transfers, transfer_list) {
 			if (bitbang->shutdown) {
@@ -269,6 +307,20 @@ static void bitbang_work(void *_bitbang)
 				break;
 			}
 
+			/* override or restore speed and wordsize */
+			if (t->speed_hz || t->bits_per_word) {
+				setup_transfer = bitbang->setup_transfer;
+				if (!setup_transfer) {
+					status = -ENOPROTOOPT;
+					break;
+				}
+			}
+			if (setup_transfer) {
+				status = setup_transfer(spi, t);
+				if (status < 0)
+					break;
+			}
+
 			/* set up default clock polarity, and activate chip;
 			 * this implicitly updates clock and spi modes as
 			 * previously recorded for this device via setup().
@@ -325,6 +377,10 @@ static void bitbang_work(void *_bitbang)
 		m->status = status;
 		m->complete(m->context);
 
+		/* restore speed and wordsize */
+		if (setup_transfer)
+			setup_transfer(spi, NULL);
+
 		/* normally deactivate chipselect ... unless no error and
 		 * cs_change has hinted that the next message will probably
 		 * be for this chip too.
@@ -348,6 +404,7 @@ int spi_bitbang_transfer(struct spi_devi
 {
 	struct spi_bitbang	*bitbang;
 	unsigned long		flags;
+	int			status = 0;
 
 	m->actual_length = 0;
 	m->status = -EINPROGRESS;
@@ -357,11 +414,15 @@ int spi_bitbang_transfer(struct spi_devi
 		return -ESHUTDOWN;
 
 	spin_lock_irqsave(&bitbang->lock, flags);
-	list_add_tail(&m->queue, &bitbang->queue);
-	queue_work(bitbang->workqueue, &bitbang->work);
+	if (!spi->max_speed_hz)
+		status = -ENETDOWN;
+	else {
+		list_add_tail(&m->queue, &bitbang->queue);
+		queue_work(bitbang->workqueue, &bitbang->work);
+	}
 	spin_unlock_irqrestore(&bitbang->lock, flags);
 
-	return 0;
+	return status;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
 
@@ -406,6 +467,9 @@ int spi_bitbang_start(struct spi_bitbang
 		bitbang->use_dma = 0;
 		bitbang->txrx_bufs = spi_bitbang_bufs;
 		if (!bitbang->master->setup) {
+			if (!bitbang->setup_transfer)
+				bitbang->setup_transfer =
+					 spi_bitbang_setup_transfer;
 			bitbang->master->setup = spi_bitbang_setup;
 			bitbang->master->cleanup = spi_bitbang_cleanup;
 		}
diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c
index ff9e5fa..a006a1e 100644
--- a/drivers/spi/spi_butterfly.c
+++ b/drivers/spi/spi_butterfly.c
@@ -321,6 +321,7 @@ static void butterfly_attach(struct parp
 	 * (firmware resets at45, acts as spi slave) or neither (we ignore
 	 * both, AVR uses AT45).  Here we expect firmware for the first option.
 	 */
+
 	pp->info[0].max_speed_hz = 15 * 1000 * 1000;
 	strcpy(pp->info[0].modalias, "mtd_dataflash");
 	pp->info[0].platform_data = &flash;
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
new file mode 100644
index 0000000..5d92a7e
--- /dev/null
+++ b/drivers/spi/spi_mpc83xx.c
@@ -0,0 +1,483 @@
+/*
+ * MPC83xx SPI controller driver.
+ *
+ * Maintainer: Kumar Gala
+ *
+ * Copyright (C) 2006 Polycom, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+/* SPI Controller registers */
+struct mpc83xx_spi_reg {
+	u8 res1[0x20];
+	__be32 mode;
+	__be32 event;
+	__be32 mask;
+	__be32 command;
+	__be32 transmit;
+	__be32 receive;
+};
+
+/* SPI Controller mode register definitions */
+#define	SPMODE_CI_INACTIVEHIGH	(1 << 29)
+#define	SPMODE_CP_BEGIN_EDGECLK	(1 << 28)
+#define	SPMODE_DIV16		(1 << 27)
+#define	SPMODE_REV		(1 << 26)
+#define	SPMODE_MS		(1 << 25)
+#define	SPMODE_ENABLE		(1 << 24)
+#define	SPMODE_LEN(x)		((x) << 20)
+#define	SPMODE_PM(x)		((x) << 16)
+
+/*
+ * Default for SPI Mode:
+ * 	SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk
+ */
+#define	SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \
+			 SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf))
+
+/* SPIE register values */
+#define	SPIE_NE		0x00000200	/* Not empty */
+#define	SPIE_NF		0x00000100	/* Not full */
+
+/* SPIM register values */
+#define	SPIM_NE		0x00000200	/* Not empty */
+#define	SPIM_NF		0x00000100	/* Not full */
+
+/* SPI Controller driver's private data. */
+struct mpc83xx_spi {
+	/* bitbang has to be first */
+	struct spi_bitbang bitbang;
+	struct completion done;
+
+	struct mpc83xx_spi_reg __iomem *base;
+
+	/* rx & tx bufs from the spi_transfer */
+	const void *tx;
+	void *rx;
+
+	/* functions to deal with different sized buffers */
+	void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
+	u32(*get_tx) (struct mpc83xx_spi *);
+
+	unsigned int count;
+	u32 irq;
+
+	unsigned nsecs;		/* (clock cycle time)/2 */
+
+	u32 sysclk;
+	void (*activate_cs) (u8 cs, u8 polarity);
+	void (*deactivate_cs) (u8 cs, u8 polarity);
+};
+
+static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
+{
+	out_be32(reg, val);
+}
+
+static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)
+{
+	return in_be32(reg);
+}
+
+#define MPC83XX_SPI_RX_BUF(type) 					  \
+void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
+{									  \
+	type * rx = mpc83xx_spi->rx;					  \
+	*rx++ = (type)data;						  \
+	mpc83xx_spi->rx = rx;						  \
+}
+
+#define MPC83XX_SPI_TX_BUF(type)				\
+u32 mpc83xx_spi_tx_buf_##type(struct mpc83xx_spi *mpc83xx_spi)	\
+{								\
+	u32 data;						\
+	const type * tx = mpc83xx_spi->tx;			\
+	data = *tx++;						\
+	mpc83xx_spi->tx = tx;					\
+	return data;						\
+}
+
+MPC83XX_SPI_RX_BUF(u8)
+MPC83XX_SPI_RX_BUF(u16)
+MPC83XX_SPI_RX_BUF(u32)
+MPC83XX_SPI_TX_BUF(u8)
+MPC83XX_SPI_TX_BUF(u16)
+MPC83XX_SPI_TX_BUF(u32)
+
+static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (value == BITBANG_CS_INACTIVE) {
+		if (mpc83xx_spi->deactivate_cs)
+			mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
+	}
+
+	if (value == BITBANG_CS_ACTIVE) {
+		u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+		u32 len = spi->bits_per_word;
+		if (len == 32)
+			len = 0;
+		else
+			len = len - 1;
+
+		/* mask out bits we are going to set */
+		regval &= ~0x38ff0000;
+
+		if (spi->mode & SPI_CPHA)
+			regval |= SPMODE_CP_BEGIN_EDGECLK;
+		if (spi->mode & SPI_CPOL)
+			regval |= SPMODE_CI_INACTIVEHIGH;
+
+		regval |= SPMODE_LEN(len);
+
+		if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) {
+			u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64);
+			regval |= SPMODE_PM(pm) | SPMODE_DIV16;
+		} else {
+			u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);
+			regval |= SPMODE_PM(pm);
+		}
+
+		mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+		if (mpc83xx_spi->activate_cs)
+			mpc83xx_spi->activate_cs(spi->chip_select, pol);
+	}
+}
+
+static
+int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u32 regval;
+	u8 bits_per_word;
+	u32 hz;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (t) {
+		bits_per_word = t->bits_per_word;
+		hz = t->speed_hz;
+	} else {
+		bits_per_word = 0;
+		hz = 0;
+	}
+
+	/* spi_transfer level calls that work per-word */
+	if (!bits_per_word)
+		bits_per_word = spi->bits_per_word;
+
+	/* Make sure its a bit width we support [4..16, 32] */
+	if ((bits_per_word < 4)
+	    || ((bits_per_word > 16) && (bits_per_word != 32)))
+		return -EINVAL;
+
+	if (bits_per_word <= 8) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+	} else if (bits_per_word <= 16) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+	} else if (bits_per_word <= 32) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
+	} else
+		return -EINVAL;
+
+	/* nsecs = (clock period)/2 */
+	if (!hz)
+		hz = spi->max_speed_hz;
+	mpc83xx_spi->nsecs = (1000000000 / 2) / hz;
+	if (mpc83xx_spi->nsecs > MAX_UDELAY_MS * 1000)
+		return -EINVAL;
+
+	if (bits_per_word == 32)
+		bits_per_word = 0;
+	else
+		bits_per_word = bits_per_word - 1;
+
+	regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+
+	/* Mask out bits_per_wordgth */
+	regval &= 0xff0fffff;
+	regval |= SPMODE_LEN(bits_per_word);
+
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+	return 0;
+}
+
+static int mpc83xx_spi_setup(struct spi_device *spi)
+{
+	struct spi_bitbang *bitbang;
+	struct mpc83xx_spi *mpc83xx_spi;
+	int retval;
+
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
+	bitbang = spi_master_get_devdata(spi->master);
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	retval = mpc83xx_spi_setup_transfer(spi, NULL);
+	if (retval < 0)
+		return retval;
+
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+		__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+		spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
+
+	/* NOTE we _need_ to call chipselect() early, ideally with adapter
+	 * setup, unless the hardware defaults cooperate to avoid confusion
+	 * between normal (active low) and inverted chipselects.
+	 */
+
+	/* deselect chip (low or high) */
+	spin_lock(&bitbang->lock);
+	if (!bitbang->busy) {
+		bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+		ndelay(mpc83xx_spi->nsecs);
+	}
+	spin_unlock(&bitbang->lock);
+
+	return 0;
+}
+
+static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u32 word;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	mpc83xx_spi->tx = t->tx_buf;
+	mpc83xx_spi->rx = t->rx_buf;
+	mpc83xx_spi->count = t->len;
+	INIT_COMPLETION(mpc83xx_spi->done);
+
+	/* enable rx ints */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
+
+	/* transmit word */
+	word = mpc83xx_spi->get_tx(mpc83xx_spi);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+
+	wait_for_completion(&mpc83xx_spi->done);
+
+	/* disable rx ints */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+
+	return t->len - mpc83xx_spi->count;
+}
+
+irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data,
+			    struct pt_regs * ptregs)
+{
+	struct mpc83xx_spi *mpc83xx_spi = context_data;
+	u32 event;
+	irqreturn_t ret = IRQ_NONE;
+
+	/* Get interrupt events(tx/rx) */
+	event = mpc83xx_spi_read_reg(&mpc83xx_spi->base->event);
+
+	/* We need handle RX first */
+	if (event & SPIE_NE) {
+		u32 rx_data = mpc83xx_spi_read_reg(&mpc83xx_spi->base->receive);
+
+		if (mpc83xx_spi->rx)
+			mpc83xx_spi->get_rx(rx_data, mpc83xx_spi);
+
+		ret = IRQ_HANDLED;
+	}
+
+	if ((event & SPIE_NF) == 0)
+		/* spin until TX is done */
+		while (((event =
+			 mpc83xx_spi_read_reg(&mpc83xx_spi->base->event)) &
+						SPIE_NF) == 0)
+			 cpu_relax();
+
+	mpc83xx_spi->count -= 1;
+	if (mpc83xx_spi->count) {
+		if (mpc83xx_spi->tx) {
+			u32 word = mpc83xx_spi->get_tx(mpc83xx_spi);
+			mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit,
+					      word);
+		}
+	} else {
+		complete(&mpc83xx_spi->done);
+	}
+
+	/* Clear the events */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, event);
+
+	return ret;
+}
+
+static int __init mpc83xx_spi_probe(struct platform_device *dev)
+{
+	struct spi_master *master;
+	struct mpc83xx_spi *mpc83xx_spi;
+	struct fsl_spi_platform_data *pdata;
+	struct resource *r;
+	u32 regval;
+	int ret = 0;
+
+	/* Get resources(memory, IRQ) associated with the device */
+	master = spi_alloc_master(&dev->dev, sizeof(struct mpc83xx_spi));
+
+	if (master == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	platform_set_drvdata(dev, master);
+	pdata = dev->dev.platform_data;
+
+	if (pdata == NULL) {
+		ret = -ENODEV;
+		goto free_master;
+	}
+
+	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		ret = -ENODEV;
+		goto free_master;
+	}
+
+	mpc83xx_spi = spi_master_get_devdata(master);
+	mpc83xx_spi->bitbang.master = spi_master_get(master);
+	mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
+	mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
+	mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
+	mpc83xx_spi->sysclk = pdata->sysclk;
+	mpc83xx_spi->activate_cs = pdata->activate_cs;
+	mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
+	mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+	mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+
+	mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
+	init_completion(&mpc83xx_spi->done);
+
+	mpc83xx_spi->base = ioremap(r->start, r->end - r->start + 1);
+	if (mpc83xx_spi->base == NULL) {
+		ret = -ENOMEM;
+		goto put_master;
+	}
+
+	mpc83xx_spi->irq = platform_get_irq(dev, 0);
+
+	if (mpc83xx_spi->irq < 0) {
+		ret = -ENXIO;
+		goto unmap_io;
+	}
+
+	/* Register for SPI Interrupt */
+	ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
+			  0, "mpc83xx_spi", mpc83xx_spi);
+
+	if (ret != 0)
+		goto unmap_io;
+
+	master->bus_num = pdata->bus_num;
+	master->num_chipselect = pdata->max_chipselect;
+
+	/* SPI controller initializations */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->command, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, 0xffffffff);
+
+	/* Enable SPI interface */
+	regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+	ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
+
+	if (ret != 0)
+		goto free_irq;
+
+	printk(KERN_INFO
+	       "%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
+	       dev->dev.bus_id, mpc83xx_spi->base, mpc83xx_spi->irq);
+
+	return ret;
+
+free_irq:
+	free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+unmap_io:
+	iounmap(mpc83xx_spi->base);
+put_master:
+	spi_master_put(master);
+free_master:
+	kfree(master);
+err:
+	return ret;
+}
+
+static int __devexit mpc83xx_spi_remove(struct platform_device *dev)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	struct spi_master *master;
+
+	master = platform_get_drvdata(dev);
+	mpc83xx_spi = spi_master_get_devdata(master);
+
+	spi_bitbang_stop(&mpc83xx_spi->bitbang);
+	free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+	iounmap(mpc83xx_spi->base);
+	spi_master_put(mpc83xx_spi->bitbang.master);
+
+	return 0;
+}
+
+static struct platform_driver mpc83xx_spi_driver = {
+	.probe = mpc83xx_spi_probe,
+	.remove = __devexit_p(mpc83xx_spi_remove),
+	.driver = {
+		   .name = "mpc83xx_spi",
+	},
+};
+
+static int __init mpc83xx_spi_init(void)
+{
+	return platform_driver_register(&mpc83xx_spi_driver);
+}
+
+static void __exit mpc83xx_spi_exit(void)
+{
+	platform_driver_unregister(&mpc83xx_spi_driver);
+}
+
+module_init(mpc83xx_spi_init);
+module_exit(mpc83xx_spi_exit);
+
+MODULE_AUTHOR("Kumar Gala");
+MODULE_DESCRIPTION("Simple MPC83xx SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
new file mode 100644
index 0000000..9de4b5a
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx.c
@@ -0,0 +1,453 @@
+/* linux/drivers/spi/spi_s3c24xx.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-spi.h>
+#include <asm/arch/spi.h>
+
+struct s3c24xx_spi {
+	/* bitbang has to be first */
+	struct spi_bitbang	 bitbang;
+	struct completion	 done;
+
+	void __iomem		*regs;
+	int			 irq;
+	int			 len;
+	int			 count;
+
+	/* data buffers */
+	const unsigned char	*tx;
+	unsigned char		*rx;
+
+	struct clk		*clk;
+	struct resource		*ioarea;
+	struct spi_master	*master;
+	struct spi_device	*curdev;
+	struct device		*dev;
+	struct s3c2410_spi_info *pdata;
+};
+
+#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
+#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
+
+static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
+{
+	return spi_master_get_devdata(sdev->master);
+}
+
+static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+	unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+	unsigned int spcon;
+
+	switch (value) {
+	case BITBANG_CS_INACTIVE:
+		if (hw->pdata->set_cs)
+			hw->pdata->set_cs(hw->pdata, value, cspol);
+		else
+			s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+		break;
+
+	case BITBANG_CS_ACTIVE:
+		spcon = readb(hw->regs + S3C2410_SPCON);
+
+		if (spi->mode & SPI_CPHA)
+			spcon |= S3C2410_SPCON_CPHA_FMTB;
+		else
+			spcon &= ~S3C2410_SPCON_CPHA_FMTB;
+
+		if (spi->mode & SPI_CPOL)
+			spcon |= S3C2410_SPCON_CPOL_HIGH;
+		else
+			spcon &= ~S3C2410_SPCON_CPOL_HIGH;
+
+		spcon |= S3C2410_SPCON_ENSCK;
+
+		/* write new configration */
+
+		writeb(spcon, hw->regs + S3C2410_SPCON);
+
+		if (hw->pdata->set_cs)
+			hw->pdata->set_cs(hw->pdata, value, cspol);
+		else
+			s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+
+		break;
+
+	}
+}
+
+static int s3c24xx_spi_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+	unsigned int bpw;
+	unsigned int hz;
+	unsigned int div;
+
+	bpw = t ? t->bits_per_word : spi->bits_per_word;
+	hz  = t ? t->speed_hz : spi->max_speed_hz;
+
+	if (bpw != 8) {
+		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+		return -EINVAL;
+	}
+
+	div = clk_get_rate(hw->clk) / hz;
+
+	/* is clk = pclk / (2 * (pre+1)), or is it
+	 *    clk = (pclk * 2) / ( pre + 1) */
+
+	div = (div / 2) - 1;
+
+	if (div < 0)
+		div = 1;
+
+	if (div > 255)
+		div = 255;
+
+	dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+	writeb(div, hw->regs + S3C2410_SPPRE);
+
+	spin_lock(&hw->bitbang.lock);
+	if (!hw->bitbang.busy) {
+		hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+		/* need to ndelay for 0.5 clocktick ? */
+	}
+	spin_unlock(&hw->bitbang.lock);
+
+	return 0;
+}
+
+static int s3c24xx_spi_setup(struct spi_device *spi)
+{
+	int ret;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if ((spi->mode & SPI_LSB_FIRST) != 0)
+		return -EINVAL;
+
+	ret = s3c24xx_spi_setupxfer(spi, NULL);
+	if (ret < 0) {
+		dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
+		__FUNCTION__, spi->mode, spi->bits_per_word,
+		spi->max_speed_hz);
+
+	return 0;
+}
+
+static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
+{
+	return hw->tx ? hw->tx[count] : 0xff;
+}
+
+static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+
+	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+		t->tx_buf, t->rx_buf, t->len);
+
+	hw->tx = t->tx_buf;
+	hw->rx = t->rx_buf;
+	hw->len = t->len;
+	hw->count = 0;
+
+	/* send the first byte */
+	writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
+	wait_for_completion(&hw->done);
+
+	return hw->count;
+}
+
+static irqreturn_t s3c24xx_spi_irq(int irq, void *dev, struct pt_regs *regs)
+{
+	struct s3c24xx_spi *hw = dev;
+	unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
+	unsigned int count = hw->count;
+
+	if (spsta & S3C2410_SPSTA_DCOL) {
+		dev_dbg(hw->dev, "data-collision\n");
+		complete(&hw->done);
+		goto irq_done;
+	}
+
+	if (!(spsta & S3C2410_SPSTA_READY)) {
+		dev_dbg(hw->dev, "spi not ready for tx?\n");
+		complete(&hw->done);
+		goto irq_done;
+	}
+
+	hw->count++;
+
+	if (hw->rx)
+		hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
+
+	count++;
+
+	if (count < hw->len)
+		writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
+	else
+		complete(&hw->done);
+
+ irq_done:
+	return IRQ_HANDLED;
+}
+
+static int s3c24xx_spi_probe(struct platform_device *pdev)
+{
+	struct s3c24xx_spi *hw;
+	struct spi_master *master;
+	struct spi_board_info *bi;
+	struct resource *res;
+	int err = 0;
+	int i;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "No memory for spi_master\n");
+		err = -ENOMEM;
+		goto err_nomem;
+	}
+
+	hw = spi_master_get_devdata(master);
+	memset(hw, 0, sizeof(struct s3c24xx_spi));
+
+	hw->master = spi_master_get(master);
+	hw->pdata = pdev->dev.platform_data;
+	hw->dev = &pdev->dev;
+
+	if (hw->pdata == NULL) {
+		dev_err(&pdev->dev, "No platform data supplied\n");
+		err = -ENOENT;
+		goto err_no_pdata;
+	}
+
+	platform_set_drvdata(pdev, hw);
+	init_completion(&hw->done);
+
+	/* setup the state for the bitbang driver */
+
+	hw->bitbang.master         = hw->master;
+	hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
+	hw->bitbang.chipselect     = s3c24xx_spi_chipsel;
+	hw->bitbang.txrx_bufs      = s3c24xx_spi_txrx;
+	hw->bitbang.master->setup  = s3c24xx_spi_setup;
+
+	dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
+
+	/* find and map our resources */
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+		err = -ENOENT;
+		goto err_no_iores;
+	}
+
+	hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
+					pdev->name);
+
+	if (hw->ioarea == NULL) {
+		dev_err(&pdev->dev, "Cannot reserve region\n");
+		err = -ENXIO;
+		goto err_no_iores;
+	}
+
+	hw->regs = ioremap(res->start, (res->end - res->start)+1);
+	if (hw->regs == NULL) {
+		dev_err(&pdev->dev, "Cannot map IO\n");
+		err = -ENXIO;
+		goto err_no_iomap;
+	}
+
+	hw->irq = platform_get_irq(pdev, 0);
+	if (hw->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ specified\n");
+		err = -ENOENT;
+		goto err_no_irq;
+	}
+
+	err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto err_no_irq;
+	}
+
+	hw->clk = clk_get(&pdev->dev, "spi");
+	if (IS_ERR(hw->clk)) {
+		dev_err(&pdev->dev, "No clock for device\n");
+		err = PTR_ERR(hw->clk);
+		goto err_no_clk;
+	}
+
+	/* for the moment, permanently enable the clock */
+
+	clk_enable(hw->clk);
+
+	/* program defaults into the registers */
+
+	writeb(0xff, hw->regs + S3C2410_SPPRE);
+	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+
+	/* setup any gpio we can */
+
+	if (!hw->pdata->set_cs) {
+		s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
+		s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+	}
+
+	/* register our spi controller */
+
+	err = spi_bitbang_start(&hw->bitbang);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to register SPI master\n");
+		goto err_register;
+	}
+
+	dev_dbg(hw->dev, "shutdown=%d\n", hw->bitbang.shutdown);
+
+	/* register all the devices associated */
+
+	bi = &hw->pdata->board_info[0];
+	for (i = 0; i < hw->pdata->board_size; i++, bi++) {
+		dev_info(hw->dev, "registering %s\n", bi->modalias);
+
+		bi->controller_data = hw;
+		spi_new_device(master, bi);
+	}
+
+	return 0;
+
+ err_register:
+	clk_disable(hw->clk);
+	clk_put(hw->clk);
+
+ err_no_clk:
+	free_irq(hw->irq, hw);
+
+ err_no_irq:
+	iounmap(hw->regs);
+
+ err_no_iomap:
+	release_resource(hw->ioarea);
+	kfree(hw->ioarea);
+
+ err_no_iores:
+ err_no_pdata:
+	spi_master_put(hw->master);;
+
+ err_nomem:
+	return err;
+}
+
+static int s3c24xx_spi_remove(struct platform_device *dev)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	spi_unregister_master(hw->master);
+
+	clk_disable(hw->clk);
+	clk_put(hw->clk);
+
+	free_irq(hw->irq, hw);
+	iounmap(hw->regs);
+
+	release_resource(hw->ioarea);
+	kfree(hw->ioarea);
+
+	spi_master_put(hw->master);
+	return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+	clk_disable(hw->clk);
+	return 0;
+}
+
+static int s3c24xx_spi_resume(struct platform_device *pdev)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+	clk_enable(hw->clk);
+	return 0;
+}
+
+#else
+#define s3c24xx_spi_suspend NULL
+#define s3c24xx_spi_resume  NULL
+#endif
+
+static struct platform_driver s3c24xx_spidrv = {
+	.probe		= s3c24xx_spi_probe,
+	.remove		= s3c24xx_spi_remove,
+	.suspend	= s3c24xx_spi_suspend,
+	.resume		= s3c24xx_spi_resume,
+	.driver		= {
+		.name	= "s3c2410-spi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init s3c24xx_spi_init(void)
+{
+        return platform_driver_register(&s3c24xx_spidrv);
+}
+
+static void __exit s3c24xx_spi_exit(void)
+{
+        platform_driver_unregister(&s3c24xx_spidrv);
+}
+
+module_init(s3c24xx_spi_init);
+module_exit(s3c24xx_spi_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
new file mode 100644
index 0000000..aacdceb
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -0,0 +1,188 @@
+/* linux/drivers/spi/spi_s3c24xx_gpio.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *
+ * S3C24XX GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/hardware.h>
+
+struct s3c2410_spigpio {
+	struct spi_bitbang		 bitbang;
+
+	struct s3c2410_spigpio_info	*info;
+	struct platform_device		*dev;
+};
+
+static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
+{
+	return spi->controller_data;
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define	EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+
+static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+
+	if (sg->info && sg->info->chip_select)
+		(sg->info->chip_select)(sg->info, value);
+}
+
+static int s3c2410_spigpio_probe(struct platform_device *dev)
+{
+	struct spi_master	*master;
+	struct s3c2410_spigpio  *sp;
+	int ret;
+	int i;
+
+	master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio));
+	if (master == NULL) {
+		dev_err(&dev->dev, "failed to allocate spi master\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	sp = spi_master_get_devdata(master);
+
+	platform_set_drvdata(dev, sp);
+
+	/* copy in the plkatform data */
+	sp->info = dev->dev.platform_data;
+
+	/* setup spi bitbang adaptor */
+	sp->bitbang.master = spi_master_get(master);
+	sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
+
+	sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
+	sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+
+	/* set state of spi pins */
+	s3c2410_gpio_setpin(sp->info->pin_clk, 0);
+	s3c2410_gpio_setpin(sp->info->pin_mosi, 0);
+
+	s3c2410_gpio_cfgpin(sp->info->pin_clk, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(sp->info->pin_mosi, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(sp->info->pin_miso, S3C2410_GPIO_INPUT);
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (ret)
+		goto err_no_bitbang;
+
+	/* register the chips to go with the board */
+
+	for (i = 0; i < sp->info->board_size; i++) {
+		dev_info(&dev->dev, "registering %p: %s\n",
+			 &sp->info->board_info[i],
+			 sp->info->board_info[i].modalias);
+
+		sp->info->board_info[i].controller_data = sp;
+		spi_new_device(master, sp->info->board_info + i);
+	}
+
+	return 0;
+
+ err_no_bitbang:
+	spi_master_put(sp->bitbang.master);
+ err:
+	return ret;
+
+}
+
+static int s3c2410_spigpio_remove(struct platform_device *dev)
+{
+	struct s3c2410_spigpio *sp = platform_get_drvdata(dev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+/* all gpio should be held over suspend/resume, so we should
+ * not need to deal with this
+*/
+
+#define s3c2410_spigpio_suspend NULL
+#define s3c2410_spigpio_resume NULL
+
+
+static struct platform_driver s3c2410_spigpio_drv = {
+	.probe		= s3c2410_spigpio_probe,
+        .remove		= s3c2410_spigpio_remove,
+        .suspend	= s3c2410_spigpio_suspend,
+        .resume		= s3c2410_spigpio_resume,
+        .driver		= {
+		.name	= "s3c24xx-spi-gpio",
+		.owner	= THIS_MODULE,
+        },
+};
+
+static int __init s3c2410_spigpio_init(void)
+{
+        return platform_driver_register(&s3c2410_spigpio_drv);
+}
+
+static void __exit s3c2410_spigpio_exit(void)
+{
+        platform_driver_unregister(&s3c2410_spigpio_drv);
+}
+
+module_init(s3c2410_spigpio_init);
+module_exit(s3c2410_spigpio_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 7860c8a..956b7a1 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -69,7 +69,7 @@ #define MAX_POLL_DELAY		60000	/* millise
 #define RESUBMIT_DELAY		1000	/* milliseconds */
 
 #define DEFAULT_BULK_ALTSETTING	1
-#define DEFAULT_ISOC_ALTSETTING	2
+#define DEFAULT_ISOC_ALTSETTING	3
 #define DEFAULT_DL_512_FIRST	0
 #define DEFAULT_ENABLE_ISOC	0
 #define DEFAULT_SW_BUFFERING	0
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index c1211fc..5462498 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -99,11 +99,11 @@ static const char usbatm_driver_name[] =
 
 #define UDSL_MAX_RCV_URBS		16
 #define UDSL_MAX_SND_URBS		16
-#define UDSL_MAX_BUF_SIZE		64 * 1024	/* bytes */
+#define UDSL_MAX_BUF_SIZE		65536
 #define UDSL_DEFAULT_RCV_URBS		4
 #define UDSL_DEFAULT_SND_URBS		4
-#define UDSL_DEFAULT_RCV_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
-#define UDSL_DEFAULT_SND_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
+#define UDSL_DEFAULT_RCV_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
+#define UDSL_DEFAULT_SND_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
 
 #define ATM_CELL_HEADER			(ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
 
@@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes,
 module_param(snd_buf_bytes, uint, S_IRUGO);
 MODULE_PARM_DESC(snd_buf_bytes,
 		 "Size of the buffers used for transmission, in bytes (range: 1-"
-		 __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
+		 __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
 		 __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
 
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fbd938d..e2e00ba 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
 			USB_SPEED_FULL;
 	hcd->self.root_hub = rhdev;
 
+	/* wakeup flag init defaults to "everything works" for root hubs,
+	 * but drivers can override it in reset() if needed, along with
+	 * recording the overall controller's system wakeup capability.
+	 */
+	device_init_wakeup(&rhdev->dev, 1);
+
 	/* "reset" is misnamed; its role is now one-time init. the controller
 	 * should already have been reset (and boot firmware kicked off etc).
 	 */
@@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		goto err_hcd_driver_setup;
 	}
 
-	/* wakeup flag init is in transition; for now we can't rely on PCI to
-	 * initialize these bits properly, so we let reset() override it.
-	 * This init should _precede_ the reset() once PCI behaves.
-	 */
-	device_init_wakeup(&rhdev->dev,
-			device_can_wakeup(hcd->self.controller));
-
 	/* NOTE: root hub and controller capabilities may not be the same */
 	if (device_can_wakeup(hcd->self.controller)
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0c87f73..90b8d43 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1168,19 +1168,9 @@ static inline const char *plural(int n)
 static int choose_configuration(struct usb_device *udev)
 {
 	int i;
-	u16 devstatus;
-	int bus_powered;
 	int num_configs;
 	struct usb_host_config *c, *best;
 
-	/* If this fails, assume the device is bus-powered */
-	devstatus = 0;
-	usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-	le16_to_cpus(&devstatus);
-	bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
-	dev_dbg(&udev->dev, "device is %s-powered\n",
-			bus_powered ? "bus" : "self");
-
 	best = NULL;
 	c = udev->config;
 	num_configs = udev->descriptor.bNumConfigurations;
@@ -1197,6 +1187,19 @@ static int choose_configuration(struct u
 		 * similar errors in their descriptors.  If the next test
 		 * were allowed to execute, such configurations would always
 		 * be rejected and the devices would not work as expected.
+		 * In the meantime, we run the risk of selecting a config
+		 * that requires external power at a time when that power
+		 * isn't available.  It seems to be the lesser of two evils.
+		 *
+		 * Bugzilla #6448 reports a device that appears to crash
+		 * when it receives a GET_DEVICE_STATUS request!  We don't
+		 * have any other way to tell whether a device is self-powered,
+		 * but since we don't use that information anywhere but here,
+		 * the call has been removed.
+		 *
+		 * Maybe the GET_DEVICE_STATUS call and the test below can
+		 * be reinstated when device firmwares become more reliable.
+		 * Don't hold your breath.
 		 */
 #if 0
 		/* Rule out self-powered configs for a bus-powered device */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 544f758..73f5a37 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd
 		i = ohci->num_ports;
 		while (i--)
 			ohci_writel (ohci, RH_PS_PSS,
-				&ohci->regs->roothub.portstatus [temp]);
+				&ohci->regs->roothub.portstatus [i]);
 		ohci_dbg (ohci, "restart complete\n");
 	}
 	return 0;
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index f419bd8..435273e 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1557,6 +1557,9 @@ #define USB_DEVICE_ID_CHERRY_CYMOTION	0x
 #define USB_VENDOR_ID_HP		0x03f0
 #define USB_DEVICE_ID_HP_USBHUB_KB	0x020c
 
+#define USB_VENDOR_ID_IBM		0x04b3
+#define USB_DEVICE_ID_IBM_USBHUB_KB	0x3005
+
 #define USB_VENDOR_ID_CREATIVELABS	0x062a
 #define USB_DEVICE_ID_CREATIVELABS_SILVERCREST	0x0201
 
@@ -1681,6 +1684,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
 	{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET },
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 6dd6666..c4670e1 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -317,6 +317,7 @@ static ssize_t hiddev_read(struct file *
 				}
 
 				schedule();
+				set_current_state(TASK_INTERRUPTIBLE);
 			}
 
 			set_current_state(TASK_RUNNING);
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 3824df3..1fd9cb8 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -15,6 +15,7 @@ #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -114,6 +115,7 @@ static int emi26_load_firmware (struct u
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
+	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
@@ -150,6 +152,7 @@ static int emi26_load_firmware (struct u
 			goto wraperr;
 		}
 	}
+	msleep(250);	/* let device settle */
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
@@ -192,6 +195,7 @@ static int emi26_load_firmware (struct u
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	/* return 1 to fail the driver inialization
 	 * and give real driver change to load */
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 52fea2e..fe35137 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -15,6 +15,7 @@ #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -123,6 +124,7 @@ static int emi62_load_firmware (struct u
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
+	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
@@ -166,6 +168,7 @@ static int emi62_load_firmware (struct u
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
 
@@ -228,6 +231,7 @@ #endif
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	kfree(buf);
 
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 2deb4c0..7683926 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * peg
 	set_register(pegasus, PhyCtrl, (indx | PHY_READ));
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, PhyCtrl, 1, data);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (data[0] & PHY_DONE)
 			break;
 	}
@@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * peg
 		*regd = le16_to_cpu(regdi);
 		return ret;
 	}
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 
@@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pe
 	set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, PhyCtrl, 1, data);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (data[0] & PHY_DONE)
 			break;
 	}
 	if (i < REG_TIMEOUT)
 		return ret;
 
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * p
 		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
 		if (tmp & EPROM_DONE)
 			break;
+		if (ret == -ESHUTDOWN)
+			goto fail;
 	}
 	if (i < REG_TIMEOUT) {
 		ret = get_registers(pegasus, EpromData, 2, &retdatai);
@@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * p
 		return ret;
 	}
 
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * 
 
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (tmp & EPROM_DONE)
 			break;
 	}
 	disable_eprom_write(pegasus);
 	if (i < REG_TIMEOUT)
 		return ret;
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_i
 	struct pegasus *pegasus = usb_get_intfdata(intf);
 	
 	netif_device_detach (pegasus->net);
+	cancel_delayed_work(&pegasus->carrier_check);
 	if (netif_running(pegasus->net)) {
-		cancel_delayed_work(&pegasus->carrier_check);
-
 		usb_kill_urb(pegasus->rx_urb);
 		usb_kill_urb(pegasus->intr_urb);
 	}
@@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_in
 		pegasus->intr_urb->status = 0;
 		pegasus->intr_urb->actual_length = 0;
 		intr_callback(pegasus->intr_urb, NULL);
-
-		queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
-					CARRIER_CHECK_DELAY);
 	}
+	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+				CARRIER_CHECK_DELAY);
 	return 0;
 }
 
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index f96b73f..5c60be5 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA
 	  To compile this driver as a module, choose M here: the
 	  module will be called anydata.
 
+config USB_SERIAL_ARK3116
+	tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
+	depends on USB_SERIAL && EXPERIMENTAL
+	help
+	  Say Y here if you want to use a ARK Micro 3116 USB to Serial
+	  device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ark3116
+
 config USB_SERIAL_BELKIN
 	tristate "USB Belkin and Peracom Single Port Serial Driver"
 	depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 93c2124..5a0960f 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -13,6 +13,7 @@ usbserial-objs	:= usb-serial.o generic.o
 
 obj-$(CONFIG_USB_SERIAL_AIRPRIME)		+= airprime.o
 obj-$(CONFIG_USB_SERIAL_ANYDATA)		+= anydata.o
+obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)			+= cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index dbf1f06..694b205 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,6 +18,7 @@ #include "usb-serial.h"
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0xf3d, 0x0112) },  /* AirPrime CDMA Wireless PC Card */
 	{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
new file mode 100644
index 0000000..8dec796
--- /dev/null
+++ b/drivers/usb/serial/ark3116.c
@@ -0,0 +1,465 @@
+/*
+ * ark3116
+ * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
+ *   productid=0x0232) (used in a datacable called KQ-U8A)
+ *
+ * - based on code by krisfx -> thanks !!
+ *   (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
+ *
+ *  - based on logs created by usbsnoopy
+ *
+ *  Author   : Simon Schulz [ark3116_driver<AT>auctionant.de]
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x6547, 0x0232) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ark3116_private {
+	spinlock_t lock;
+	u8 termios_initialized;
+};
+
+static inline void ARK3116_SND(struct usb_serial *serial, int seq,
+			       __u8 request, __u8 requesttype,
+			       __u16 value, __u16 index)
+{
+	int result;
+	result = usb_control_msg(serial->dev,
+				 usb_sndctrlpipe(serial->dev,0),
+				 request, requesttype, value, index,
+				 NULL,0x00, 1000);
+	dbg("%03d > ok",seq);
+}
+
+static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
+			       __u8 request, __u8 requesttype,
+			       __u16 value, __u16 index, __u8 expected,
+			       char *buf)
+{
+	int result;
+	result = usb_control_msg(serial->dev,
+			      usb_rcvctrlpipe(serial->dev,0),
+			      request, requesttype, value, index,
+			      buf, 0x0000001, 1000);
+	if (result)
+		dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
+	else
+		dbg("%03d < 0 bytes", seq);
+}
+
+
+static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
+				     __u8 request, __u8 requesttype,
+				     __u16 value, __u16 index, char *buf)
+{
+	usb_control_msg(serial->dev,
+			usb_rcvctrlpipe(serial->dev,0),
+			request, requesttype, value, index,
+			buf, 0x0000001, 1000);
+}
+
+
+static int ark3116_attach(struct usb_serial *serial)
+{
+	char *buf;
+	struct ark3116_private *priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
+		if (!priv)
+			goto cleanup;
+		memset (priv, 0x00, sizeof (struct ark3116_private));
+		spin_lock_init(&priv->lock);
+
+		usb_set_serial_port_data(serial->port[i], priv);
+	}
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc -> out of mem ?");
+		goto cleanup;
+	}
+
+	/* 3 */
+	ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
+	ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
+	ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
+	ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
+
+	/* <-- seq7 */
+	ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
+	ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
+	ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
+	ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
+	ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
+
+	/* <-- seq12 */
+	ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
+
+	/* 14 */
+	ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
+
+	/* 16 */
+	ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	/* --> seq17 */
+	ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
+
+	/* <-- seq18 */
+	ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+	/* --> seq19 */
+	ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
+
+
+	/* <-- seq20 */
+	/* seems like serial port status info (RTS, CTS,...) */
+	/* returns modem control line status ?! */
+	ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+	/* set 9600 baud & do some init ?! */
+	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+	ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
+	ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
+	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+	ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
+
+	kfree(buf);
+	return(0);
+
+cleanup:
+	for (--i; i>=0; --i)
+		usb_set_serial_port_data(serial->port[i], NULL);
+	return -ENOMEM;
+}
+
+static void ark3116_set_termios(struct usb_serial_port *port,
+				struct termios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	unsigned int cflag = port->tty->termios->c_cflag;
+	unsigned long flags;
+	int baud;
+	int ark3116_baud;
+	char *buf;
+	char config;
+
+	config = 0;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	if ((!port->tty) || (!port->tty->termios)) {
+		dbg("%s - no tty structures", __FUNCTION__);
+		return;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!priv->termios_initialized) {
+		*(port->tty->termios) = tty_std_termios;
+		port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+		priv->termios_initialized = 1;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	cflag = port->tty->termios->c_cflag;
+
+	/* check that they really want us to change something: */
+	if (old_termios) {
+		if ((cflag == old_termios->c_cflag) &&
+		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
+		     RELEVANT_IFLAG(old_termios->c_iflag))) {
+			dbg("%s - nothing to change...", __FUNCTION__);
+			return;
+		}
+	}
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc");
+		return;
+	}
+
+	/* set data bit count (8/7/6/5) */
+	if (cflag & CSIZE){
+		switch (cflag & CSIZE){
+		case CS5:
+			config |= 0x00;
+			dbg("setting CS5");
+			break;
+		case CS6:
+			config |= 0x01;
+			dbg("setting CS6");
+			break;
+		case CS7:
+			config |= 0x02;
+			dbg("setting CS7");
+			break;
+		default:
+			err ("CSIZE was set but not CS5-CS8, using CS8!");
+		case CS8:
+			config |= 0x03;
+			dbg("setting CS8");
+			break;
+		}
+	}
+
+	/* set parity (NONE,EVEN,ODD) */
+	if (cflag & PARENB){
+		if (cflag & PARODD) {
+			config |= 0x08;
+			dbg("setting parity to ODD");
+		} else {
+			config |= 0x18;
+			dbg("setting parity to EVEN");
+		}
+	} else {
+		dbg("setting parity to NONE");
+	}
+
+	/* SET STOPBIT (1/2) */
+	if (cflag & CSTOPB) {
+		config |= 0x04;
+		dbg ("setting 2 stop bits");
+	} else {
+		dbg ("setting 1 stop bit");
+	}
+
+
+	/* set baudrate: */
+	baud = 0;
+	switch (cflag & CBAUD){
+		case B0:
+			err("can't set 0baud, using 9600 instead");
+			break;
+		case B75:	baud = 75;	break;
+		case B150:	baud = 150;	break;
+		case B300:	baud = 300;	break;
+		case B600:	baud = 600;	break;
+		case B1200:	baud = 1200;	break;
+		case B1800:	baud = 1800;	break;
+		case B2400:	baud = 2400;	break;
+		case B4800:	baud = 4800;	break;
+		case B9600:	baud = 9600;	break;
+		case B19200:	baud = 19200;	break;
+		case B38400:	baud = 38400;	break;
+		case B57600:	baud = 57600;	break;
+		case B115200:	baud = 115200;	break;
+		case B230400:	baud = 230400;	break;
+		case B460800:	baud = 460800;	break;
+		default:
+			dbg("does not support the baudrate requested (fix it)");
+			break;
+	}
+
+	/* set 9600 as default (if given baudrate is invalid for example) */
+	if (baud == 0)
+		baud = 9600;
+
+	/*
+	 * found by try'n'error, be careful, maybe there are other options
+	 * for multiplicator etc!
+	 */
+	if (baud == 460800)
+		/* strange, for 460800 the formula is wrong
+		 * (dont use round(), then 9600baud is wrong) */
+		ark3116_baud = 7;
+	else
+		ark3116_baud = 3000000 / baud;
+
+	/* ? */
+	ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
+	/* offset = buf[0]; */
+	/* offset = 0x03; */
+	/* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
+
+
+	/* set baudrate */
+	dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
+	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+	ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF)   ,0x0000);
+	ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
+	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+
+	/* ? */
+	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+
+	/* set data bit count, stop bit count & parity: */
+	dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
+	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+	ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
+
+	if (cflag & CRTSCTS)
+		dbg("CRTSCTS not supported by chipset ?!");
+
+	/* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
+
+	kfree(buf);
+	return;
+}
+
+static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+{
+	struct termios tmp_termios;
+	struct usb_serial *serial = port->serial;
+	char *buf;
+	int result = 0;
+
+	dbg("%s -  port %d", __FUNCTION__, port->number);
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc -> out of mem ?");
+		return -ENOMEM;
+	}
+
+	result = usb_serial_generic_open(port, filp);
+	if (result)
+		return result;
+
+	/* open */
+	ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
+
+	ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
+	ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
+	ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
+	ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
+
+	ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
+	ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
+
+	ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
+	ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
+
+	ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+
+	ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
+
+	ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+	ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
+
+	/* returns different values (control lines ?!) */
+	ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+	/* initialise termios: */
+	if (port->tty)
+		ark3116_set_termios(port, &tmp_termios);
+
+	kfree(buf);
+
+	return result;
+
+}
+
+static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+			 unsigned int cmd, unsigned long arg)
+{
+	dbg("ioctl not supported yet...");
+	return -ENOIOCTLCMD;
+}
+
+static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+	struct usb_serial *serial = port->serial;
+	char *buf;
+	char temp;
+
+	/* seems like serial port status info (RTS, CTS,...) is stored
+	 * in reg(?) 0x0006
+	 * pcb connection point 11 = GND -> sets bit4 of response
+	 * pcb connection point  7 = GND -> sets bit6 of response
+	 */
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc");
+		return -ENOMEM;
+	}
+
+	/* read register: */
+	ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
+	temp = buf[0];
+	kfree(buf);
+
+	/* i do not really know if bit4=CTS and bit6=DSR... was just a
+	 * quick guess !!
+	 */
+	return  (temp & (1<<4) ? TIOCM_CTS : 0) |
+	        (temp & (1<<6) ? TIOCM_DSR : 0);
+}
+
+static struct usb_driver ark3116_driver = {
+	.name =		"ark3116",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+};
+
+static struct usb_serial_driver ark3116_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ark3116",
+	},
+	.id_table =		id_table,
+	.num_interrupt_in =	1,
+	.num_bulk_in =		1,
+	.num_bulk_out =		1,
+	.num_ports =		1,
+	.attach =		ark3116_attach,
+	.set_termios =		ark3116_set_termios,
+	.ioctl =		ark3116_ioctl,
+	.tiocmget =		ark3116_tiocmget,
+	.open =			ark3116_open,
+};
+
+static int __init ark3116_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&ark3116_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&ark3116_driver);
+	if (retval)
+		usb_serial_deregister(&ark3116_device);
+	return retval;
+}
+
+static void __exit ark3116_exit(void)
+{
+	usb_deregister(&ark3116_driver);
+	usb_serial_deregister(&ark3116_device);
+}
+
+module_init(ark3116_init);
+module_exit(ark3116_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8215120..986d762 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -307,6 +307,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIR
 
 
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
@@ -498,6 +499,7 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
 	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 2c55a5e..d69a917 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -32,6 +32,10 @@ #define FTDI_NF_RIC_VID	0x0DCD	/* Vendor
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 
 
+/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID	0xF2D0
+
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -426,6 +430,11 @@ #define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
 
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
 
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 476cda1..c62cc28 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_
 
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 
 static void generic_cleanup (struct usb_serial_port *port)
 {
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 4d40704..238033a 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -257,14 +257,14 @@ static int omninet_write (struct usb_ser
 		return (0);
 	}
 
-	spin_lock(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock(&port->lock);
+	spin_lock(&wport->lock);
+	if (wport->write_urb_busy) {
+		spin_unlock(&wport->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
-	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	wport->write_urb_busy = 1;
+	spin_unlock(&wport->lock);
 
 	count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
 
@@ -283,7 +283,7 @@ static int omninet_write (struct usb_ser
 	wport->write_urb->dev = serial->dev;
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
-		port->write_urb_busy = 0;
+		wport->write_urb_busy = 0;
 		err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
 	} else
 		result = count;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 071f86a..9c36f0e 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -189,11 +189,15 @@ static int serial_open (struct tty_struc
 
 	portNumber = tty->index - serial->minor;
 	port = serial->port[portNumber];
-	if (!port)
-		return -ENODEV;
+	if (!port) {
+		retval = -ENODEV;
+		goto bailout_kref_put;
+	}
 
-	if (mutex_lock_interruptible(&port->mutex))
-		return -ERESTARTSYS;
+	if (mutex_lock_interruptible(&port->mutex)) {
+		retval = -ERESTARTSYS;
+		goto bailout_kref_put;
+	}
 	 
 	++port->open_count;
 
@@ -209,7 +213,7 @@ static int serial_open (struct tty_struc
 		 * safe because we are called with BKL held */
 		if (!try_module_get(serial->type->driver.owner)) {
 			retval = -ENODEV;
-			goto bailout_kref_put;
+			goto bailout_mutex_unlock;
 		}
 
 		/* only call the device specific open if this 
@@ -224,10 +228,11 @@ static int serial_open (struct tty_struc
 
 bailout_module_put:
 	module_put(serial->type->driver.owner);
-bailout_kref_put:
-	kref_put(&serial->kref, destroy_serial);
+bailout_mutex_unlock:
 	port->open_count = 0;
 	mutex_unlock(&port->mutex);
+bailout_kref_put:
+	kref_put(&serial->kref, destroy_serial);
 	return retval;
 }
 
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 334b1db..27597c5 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -29,12 +29,15 @@ static ssize_t backlight_show_power(stru
 
 static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc = -ENXIO, power;
+	int rc = -ENXIO;
 	char *endp;
 	struct backlight_device *bd = to_backlight_device(cdev);
+	int power = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	power = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&bd->sem);
@@ -65,12 +68,15 @@ static ssize_t backlight_show_brightness
 
 static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc = -ENXIO, brightness;
+	int rc = -ENXIO;
 	char *endp;
 	struct backlight_device *bd = to_backlight_device(cdev);
+	int brightness = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	brightness = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&bd->sem);
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 86908a6..bc8ab00 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -31,12 +31,15 @@ static ssize_t lcd_show_power(struct cla
 
 static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc, power;
+	int rc = -ENXIO;
 	char *endp;
 	struct lcd_device *ld = to_lcd_device(cdev);
+	int power = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	power = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&ld->sem);
@@ -44,8 +47,7 @@ static ssize_t lcd_store_power(struct cl
 		pr_debug("lcd: set power to %d\n", power);
 		ld->props->set_power(ld, power);
 		rc = count;
-	} else
-		rc = -ENXIO;
+	}
 	up(&ld->sem);
 
 	return rc;
@@ -53,14 +55,12 @@ static ssize_t lcd_store_power(struct cl
 
 static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)
 {
-	int rc;
+	int rc = -ENXIO;
 	struct lcd_device *ld = to_lcd_device(cdev);
 
 	down(&ld->sem);
 	if (likely(ld->props && ld->props->get_contrast))
 		rc = sprintf(buf, "%d\n", ld->props->get_contrast(ld));
-	else
-		rc = -ENXIO;
 	up(&ld->sem);
 
 	return rc;
@@ -68,12 +68,15 @@ static ssize_t lcd_show_contrast(struct 
 
 static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc, contrast;
+	int rc = -ENXIO;
 	char *endp;
 	struct lcd_device *ld = to_lcd_device(cdev);
+	int contrast = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	contrast = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&ld->sem);
@@ -81,8 +84,7 @@ static ssize_t lcd_store_contrast(struct
 		pr_debug("lcd: set contrast to %d\n", contrast);
 		ld->props->set_contrast(ld, contrast);
 		rc = count;
-	} else
-		rc = -ENXIO;
+	}
 	up(&ld->sem);
 
 	return rc;
@@ -90,14 +92,12 @@ static ssize_t lcd_store_contrast(struct
 
 static ssize_t lcd_show_max_contrast(struct class_device *cdev, char *buf)
 {
-	int rc;
+	int rc = -ENXIO;
 	struct lcd_device *ld = to_lcd_device(cdev);
 
 	down(&ld->sem);
 	if (likely(ld->props))
 		rc = sprintf(buf, "%d\n", ld->props->max_contrast);
-	else
-		rc = -ENXIO;
 	up(&ld->sem);
 
 	return rc;
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 788297e..44aa2ff 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -76,8 +76,8 @@ #include "i810_main.h"
  *
  * Experiment with v_offset to find out which works best for you.
  */
-static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
-static u32 voffset          __initdata = 0;
+static u32 v_offset_default __devinitdata; /* For 32 MiB Aper size, 8 should be the default */
+static u32 voffset          __devinitdata;
 
 static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
 static int  __devinit i810fb_init_pci (struct pci_dev *dev,
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/matrox/g450_pll.c
index 8073a73..440272a 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/matrox/g450_pll.c
@@ -316,14 +316,24 @@ static int __g450_setclk(WPMINFO unsigne
 		case M_PIXEL_PLL_B:
 		case M_PIXEL_PLL_C:
 			{
-				u_int8_t tmp;
+				u_int8_t tmp, xpwrctrl;
 				unsigned long flags;
 				
 				matroxfb_DAC_lock_irqsave(flags);
+
+				xpwrctrl = matroxfb_DAC_in(PMINFO M1064_XPWRCTRL);
+				matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl & ~M1064_XPWRCTRL_PANELPDN);
+				mga_outb(M_SEQ_INDEX, M_SEQ1);
+				mga_outb(M_SEQ_DATA, mga_inb(M_SEQ_DATA) | M_SEQ1_SCROFF);
 				tmp = matroxfb_DAC_in(PMINFO M1064_XPIXCLKCTRL);
+				tmp |= M1064_XPIXCLKCTRL_DIS;
 				if (!(tmp & M1064_XPIXCLKCTRL_PLL_UP)) {
-					matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp | M1064_XPIXCLKCTRL_PLL_UP);
+					tmp |= M1064_XPIXCLKCTRL_PLL_UP;
 				}
+				matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp);
+				matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0);
+				matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl);
+
 				matroxfb_DAC_unlock_irqrestore(flags);
 			}
 			{
@@ -418,6 +428,15 @@ #endif			
 				   frequency to higher - with <= lowest wins, while
 				   with < highest one wins */
 				if (delta <= deltaarray[idx-1]) {
+					/* all else being equal except VCO,
+					 * choose VCO not near (within 1/16th or so) VCOmin
+					 * (freqs near VCOmin aren't as stable)
+					 */
+					if (delta == deltaarray[idx-1]
+					    && vco != g450_mnp2vco(PMINFO mnparray[idx-1])
+					    && vco < (pi->vcomin * 17 / 16)) {
+						break;
+					}
 					mnparray[idx] = mnparray[idx-1];
 					deltaarray[idx] = deltaarray[idx-1];
 				} else {
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/matrox/matroxfb_DAC1064.h
index 2e7238a..56513a5 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/matrox/matroxfb_DAC1064.h
@@ -40,6 +40,7 @@ #define M1064_XCURCOL0BLUE	0x0A
 #define M1064_XCURCOL1RED	0x0C
 #define M1064_XCURCOL1GREEN	0x0D
 #define M1064_XCURCOL1BLUE	0x0E
+#define M1064_XDVICLKCTRL	0x0F
 #define M1064_XCURCOL2RED	0x10
 #define M1064_XCURCOL2GREEN	0x11
 #define M1064_XCURCOL2BLUE	0x12
@@ -144,6 +145,7 @@ #define M1064_XVIDPLLM		0x8E
 #define M1064_XVIDPLLN		0x8F
 
 #define M1064_XPWRCTRL		0xA0
+#define     M1064_XPWRCTRL_PANELPDN	0x04
 
 #define M1064_XPANMODE		0xA2
 
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index 3a3e180..b717371 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -672,6 +672,8 @@ #define M_3C2_RD	0x1FC2
 
 #define M_SEQ_INDEX	0x1FC4
 #define M_SEQ_DATA	0x1FC5
+#define     M_SEQ1		0x01
+#define        M_SEQ1_SCROFF		0x20
 
 #define M_MISC_REG_READ	0x1FCC
 
diff --git a/fs/9p/fcall.c b/fs/9p/fcall.c
index 71742ba..6f26178 100644
--- a/fs/9p/fcall.c
+++ b/fs/9p/fcall.c
@@ -98,23 +98,20 @@ v9fs_t_attach(struct v9fs_session_info *
 static void v9fs_t_clunk_cb(void *a, struct v9fs_fcall *tc,
 	struct v9fs_fcall *rc, int err)
 {
-	int fid;
+	int fid, id;
 	struct v9fs_session_info *v9ses;
 
-	if (err)
-		return;
-
+	id = 0;
 	fid = tc->params.tclunk.fid;
-	kfree(tc);
-
-	if (!rc)
-		return;
-
-	v9ses = a;
-	if (rc->id == RCLUNK)
-		v9fs_put_idpool(fid, &v9ses->fidpool);
+	if (rc)
+		id = rc->id;
 
+	kfree(tc);
 	kfree(rc);
+	if (id == RCLUNK) {
+		v9ses = a;
+		v9fs_put_idpool(fid, &v9ses->fidpool);
+	}
 }
 
 /**
diff --git a/fs/9p/mux.c b/fs/9p/mux.c
index 3e5b124..f4407eb 100644
--- a/fs/9p/mux.c
+++ b/fs/9p/mux.c
@@ -50,15 +50,23 @@ enum {
 	Wpending = 8,		/* can write */
 };
 
+enum {
+	None,
+	Flushing,
+	Flushed,
+};
+
 struct v9fs_mux_poll_task;
 
 struct v9fs_req {
+	spinlock_t lock;
 	int tag;
 	struct v9fs_fcall *tcall;
 	struct v9fs_fcall *rcall;
 	int err;
 	v9fs_mux_req_callback cb;
 	void *cba;
+	int flush;
 	struct list_head req_list;
 };
 
@@ -96,8 +104,8 @@ struct v9fs_mux_poll_task {
 
 struct v9fs_mux_rpc {
 	struct v9fs_mux_data *m;
-	struct v9fs_req *req;
 	int err;
+	struct v9fs_fcall *tcall;
 	struct v9fs_fcall *rcall;
 	wait_queue_head_t wqueue;
 };
@@ -524,10 +532,9 @@ again:
 
 static void process_request(struct v9fs_mux_data *m, struct v9fs_req *req)
 {
-	int ecode, tag;
+	int ecode;
 	struct v9fs_str *ename;
 
-	tag = req->tag;
 	if (!req->err && req->rcall->id == RERROR) {
 		ecode = req->rcall->params.rerror.errno;
 		ename = &req->rcall->params.rerror.error;
@@ -553,23 +560,6 @@ static void process_request(struct v9fs_
 		if (!req->err)
 			req->err = -EIO;
 	}
-
-	if (req->err == ERREQFLUSH)
-		return;
-
-	if (req->cb) {
-		dprintk(DEBUG_MUX, "calling callback tcall %p rcall %p\n",
-			req->tcall, req->rcall);
-
-		(*req->cb) (req->cba, req->tcall, req->rcall, req->err);
-		req->cb = NULL;
-	} else
-		kfree(req->rcall);
-
-	v9fs_mux_put_tag(m, tag);
-
-	wake_up(&m->equeue);
-	kfree(req);
 }
 
 /**
@@ -669,17 +659,26 @@ static void v9fs_read_work(void *a)
 		list_for_each_entry_safe(rreq, rptr, &m->req_list, req_list) {
 			if (rreq->tag == rcall->tag) {
 				req = rreq;
-				req->rcall = rcall;
-				list_del(&req->req_list);
-				spin_unlock(&m->lock);
-				process_request(m, req);
+				if (req->flush != Flushing)
+					list_del(&req->req_list);
 				break;
 			}
-
 		}
+		spin_unlock(&m->lock);
 
-		if (!req) {
-			spin_unlock(&m->lock);
+		if (req) {
+			req->rcall = rcall;
+			process_request(m, req);
+
+			if (req->flush != Flushing) {
+				if (req->cb)
+					(*req->cb) (req, req->cba);
+				else
+					kfree(req->rcall);
+
+				wake_up(&m->equeue);
+			}
+		} else {
 			if (err >= 0 && rcall->id != RFLUSH)
 				dprintk(DEBUG_ERROR,
 					"unexpected response mux %p id %d tag %d\n",
@@ -746,7 +745,6 @@ static struct v9fs_req *v9fs_send_reques
 		return ERR_PTR(-ENOMEM);
 
 	v9fs_set_tag(tc, n);
-
 	if ((v9fs_debug_level&DEBUG_FCALL) == DEBUG_FCALL) {
 		char buf[150];
 
@@ -754,12 +752,14 @@ static struct v9fs_req *v9fs_send_reques
 		printk(KERN_NOTICE "<<< %p %s\n", m, buf);
 	}
 
+	spin_lock_init(&req->lock);
 	req->tag = n;
 	req->tcall = tc;
 	req->rcall = NULL;
 	req->err = 0;
 	req->cb = cb;
 	req->cba = cba;
+	req->flush = None;
 
 	spin_lock(&m->lock);
 	list_add_tail(&req->req_list, &m->unsent_req_list);
@@ -776,72 +776,108 @@ static struct v9fs_req *v9fs_send_reques
 	return req;
 }
 
-static void v9fs_mux_flush_cb(void *a, struct v9fs_fcall *tc,
-			      struct v9fs_fcall *rc, int err)
+static void v9fs_mux_free_request(struct v9fs_mux_data *m, struct v9fs_req *req)
+{
+	v9fs_mux_put_tag(m, req->tag);
+	kfree(req);
+}
+
+static void v9fs_mux_flush_cb(struct v9fs_req *freq, void *a)
 {
 	v9fs_mux_req_callback cb;
 	int tag;
 	struct v9fs_mux_data *m;
-	struct v9fs_req *req, *rptr;
+	struct v9fs_req *req, *rreq, *rptr;
 
 	m = a;
-	dprintk(DEBUG_MUX, "mux %p tc %p rc %p err %d oldtag %d\n", m, tc,
-		rc, err, tc->params.tflush.oldtag);
+	dprintk(DEBUG_MUX, "mux %p tc %p rc %p err %d oldtag %d\n", m,
+		freq->tcall, freq->rcall, freq->err,
+		freq->tcall->params.tflush.oldtag);
 
 	spin_lock(&m->lock);
 	cb = NULL;
-	tag = tc->params.tflush.oldtag;
-	list_for_each_entry_safe(req, rptr, &m->req_list, req_list) {
-		if (req->tag == tag) {
+	tag = freq->tcall->params.tflush.oldtag;
+	req = NULL;
+	list_for_each_entry_safe(rreq, rptr, &m->req_list, req_list) {
+		if (rreq->tag == tag) {
+			req = rreq;
 			list_del(&req->req_list);
-			if (req->cb) {
-				cb = req->cb;
-				req->cb = NULL;
-				spin_unlock(&m->lock);
-				(*cb) (req->cba, req->tcall, req->rcall,
-				       req->err);
-			}
-			kfree(req);
-			wake_up(&m->equeue);
 			break;
 		}
 	}
+	spin_unlock(&m->lock);
 
-	if (!cb)
-		spin_unlock(&m->lock);
+	if (req) {
+		spin_lock(&req->lock);
+		req->flush = Flushed;
+		spin_unlock(&req->lock);
+
+		if (req->cb)
+			(*req->cb) (req, req->cba);
+		else
+			kfree(req->rcall);
+
+		wake_up(&m->equeue);
+	}
 
-	v9fs_mux_put_tag(m, tag);
-	kfree(tc);
-	kfree(rc);
+	kfree(freq->tcall);
+	kfree(freq->rcall);
+	v9fs_mux_free_request(m, freq);
 }
 
-static void
+static int
 v9fs_mux_flush_request(struct v9fs_mux_data *m, struct v9fs_req *req)
 {
 	struct v9fs_fcall *fc;
+	struct v9fs_req *rreq, *rptr;
 
 	dprintk(DEBUG_MUX, "mux %p req %p tag %d\n", m, req, req->tag);
 
+	/* if a response was received for a request, do nothing */
+	spin_lock(&req->lock);
+	if (req->rcall || req->err) {
+		spin_unlock(&req->lock);
+		dprintk(DEBUG_MUX, "mux %p req %p response already received\n", m, req);
+		return 0;
+	}
+
+	req->flush = Flushing;
+	spin_unlock(&req->lock);
+
+	spin_lock(&m->lock);
+	/* if the request is not sent yet, just remove it from the list */
+	list_for_each_entry_safe(rreq, rptr, &m->unsent_req_list, req_list) {
+		if (rreq->tag == req->tag) {
+			dprintk(DEBUG_MUX, "mux %p req %p request is not sent yet\n", m, req);
+			list_del(&rreq->req_list);
+			req->flush = Flushed;
+			spin_unlock(&m->lock);
+			if (req->cb)
+				(*req->cb) (req, req->cba);
+			return 0;
+		}
+	}
+	spin_unlock(&m->lock);
+
+	clear_thread_flag(TIF_SIGPENDING);
 	fc = v9fs_create_tflush(req->tag);
 	v9fs_send_request(m, fc, v9fs_mux_flush_cb, m);
+	return 1;
 }
 
 static void
-v9fs_mux_rpc_cb(void *a, struct v9fs_fcall *tc, struct v9fs_fcall *rc, int err)
+v9fs_mux_rpc_cb(struct v9fs_req *req, void *a)
 {
 	struct v9fs_mux_rpc *r;
 
-	if (err == ERREQFLUSH) {
-		kfree(rc);
-		dprintk(DEBUG_MUX, "err req flush\n");
-		return;
-	}
-
+	dprintk(DEBUG_MUX, "req %p r %p\n", req, a);
 	r = a;
-	dprintk(DEBUG_MUX, "mux %p req %p tc %p rc %p err %d\n", r->m, r->req,
-		tc, rc, err);
-	r->rcall = rc;
-	r->err = err;
+	r->rcall = req->rcall;
+	r->err = req->err;
+
+	if (req->flush!=None && !req->err)
+		r->err = -ERESTARTSYS;
+
 	wake_up(&r->wqueue);
 }
 
@@ -856,12 +892,13 @@ int
 v9fs_mux_rpc(struct v9fs_mux_data *m, struct v9fs_fcall *tc,
 	     struct v9fs_fcall **rc)
 {
-	int err;
+	int err, sigpending;
 	unsigned long flags;
 	struct v9fs_req *req;
 	struct v9fs_mux_rpc r;
 
 	r.err = 0;
+	r.tcall = tc;
 	r.rcall = NULL;
 	r.m = m;
 	init_waitqueue_head(&r.wqueue);
@@ -869,48 +906,50 @@ v9fs_mux_rpc(struct v9fs_mux_data *m, st
 	if (rc)
 		*rc = NULL;
 
+	sigpending = 0;
+	if (signal_pending(current)) {
+		sigpending = 1;
+		clear_thread_flag(TIF_SIGPENDING);
+	}
+
 	req = v9fs_send_request(m, tc, v9fs_mux_rpc_cb, &r);
 	if (IS_ERR(req)) {
 		err = PTR_ERR(req);
 		dprintk(DEBUG_MUX, "error %d\n", err);
-		return PTR_ERR(req);
+		return err;
 	}
 
-	r.req = req;
-	dprintk(DEBUG_MUX, "mux %p tc %p tag %d rpc %p req %p\n", m, tc,
-		req->tag, &r, req);
 	err = wait_event_interruptible(r.wqueue, r.rcall != NULL || r.err < 0);
 	if (r.err < 0)
 		err = r.err;
 
 	if (err == -ERESTARTSYS && m->trans->status == Connected && m->err == 0) {
-		spin_lock(&m->lock);
-		req->tcall = NULL;
-		req->err = ERREQFLUSH;
-		spin_unlock(&m->lock);
+		if (v9fs_mux_flush_request(m, req)) {
+			/* wait until we get response of the flush message */
+			do {
+				clear_thread_flag(TIF_SIGPENDING);
+				err = wait_event_interruptible(r.wqueue,
+					r.rcall || r.err);
+			} while (!r.rcall && !r.err && err==-ERESTARTSYS &&
+				m->trans->status==Connected && !m->err);
+		}
+		sigpending = 1;
+	}
 
-		clear_thread_flag(TIF_SIGPENDING);
-		v9fs_mux_flush_request(m, req);
+	if (sigpending) {
 		spin_lock_irqsave(&current->sighand->siglock, flags);
 		recalc_sigpending();
 		spin_unlock_irqrestore(&current->sighand->siglock, flags);
 	}
 
-	if (!err) {
-		if (r.rcall)
-			dprintk(DEBUG_MUX, "got response id %d tag %d\n",
-				r.rcall->id, r.rcall->tag);
-
-		if (rc)
-			*rc = r.rcall;
-		else
-			kfree(r.rcall);
-	} else {
+	if (rc)
+		*rc = r.rcall;
+	else
 		kfree(r.rcall);
-		dprintk(DEBUG_MUX, "got error %d\n", err);
-		if (err > 0)
-			err = -EIO;
-	}
+
+	v9fs_mux_free_request(m, req);
+	if (err > 0)
+		err = -EIO;
 
 	return err;
 }
@@ -951,12 +990,15 @@ void v9fs_mux_cancel(struct v9fs_mux_dat
 	struct v9fs_req *req, *rtmp;
 	LIST_HEAD(cancel_list);
 
-	dprintk(DEBUG_MUX, "mux %p err %d\n", m, err);
+	dprintk(DEBUG_ERROR, "mux %p err %d\n", m, err);
 	m->err = err;
 	spin_lock(&m->lock);
 	list_for_each_entry_safe(req, rtmp, &m->req_list, req_list) {
 		list_move(&req->req_list, &cancel_list);
 	}
+	list_for_each_entry_safe(req, rtmp, &m->unsent_req_list, req_list) {
+		list_move(&req->req_list, &cancel_list);
+	}
 	spin_unlock(&m->lock);
 
 	list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
@@ -965,11 +1007,9 @@ void v9fs_mux_cancel(struct v9fs_mux_dat
 			req->err = err;
 
 		if (req->cb)
-			(*req->cb) (req->cba, req->tcall, req->rcall, req->err);
+			(*req->cb) (req, req->cba);
 		else
 			kfree(req->rcall);
-
-		kfree(req);
 	}
 
 	wake_up(&m->equeue);
diff --git a/fs/9p/mux.h b/fs/9p/mux.h
index e90bfd3..fb10c50 100644
--- a/fs/9p/mux.h
+++ b/fs/9p/mux.h
@@ -24,6 +24,7 @@
  */
 
 struct v9fs_mux_data;
+struct v9fs_req;
 
 /**
  * v9fs_mux_req_callback - callback function that is called when the
@@ -36,8 +37,7 @@ struct v9fs_mux_data;
  * @rc - response call
  * @err - error code (non-zero if error occured)
  */
-typedef void (*v9fs_mux_req_callback)(void *a, struct v9fs_fcall *tc,
-	struct v9fs_fcall *rc, int err);
+typedef void (*v9fs_mux_req_callback)(struct v9fs_req *req, void *a);
 
 int v9fs_mux_global_init(void);
 void v9fs_mux_global_exit(void);
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 083dcfc..1a8e460 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -72,11 +72,17 @@ int v9fs_file_open(struct inode *inode, 
 		return -ENOSPC;
 	}
 
-	err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, NULL);
+	err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, &fcall);
 	if (err < 0) {
 		dprintk(DEBUG_ERROR, "rewalk didn't work\n");
-		goto put_fid;
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+		else {
+			v9fs_put_idpool(fid, &v9ses->fidpool);
+			goto free_fcall;
+		}
 	}
+	kfree(fcall);
 
 	/* TODO: do special things for O_EXCL, O_NOFOLLOW, O_SYNC */
 	/* translate open mode appropriately */
@@ -109,8 +115,7 @@ int v9fs_file_open(struct inode *inode, 
 clunk_fid:
 	v9fs_t_clunk(v9ses, fid);
 
-put_fid:
-	v9fs_put_idpool(fid, &v9ses->fidpool);
+free_fcall:
 	kfree(fcall);
 
 	return err;
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 133db36..2cb87ba 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -270,7 +270,10 @@ v9fs_create(struct v9fs_session_info *v9
 	err = v9fs_t_walk(v9ses, pfid, fid, NULL, &fcall);
 	if (err < 0) {
 		PRINT_FCALL_ERROR("clone error", fcall);
-		goto put_fid;
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+		else
+			goto put_fid;
 	}
 	kfree(fcall);
 
@@ -322,6 +325,9 @@ v9fs_clone_walk(struct v9fs_session_info
 		&fcall);
 
 	if (err < 0) {
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+
 		PRINT_FCALL_ERROR("walk error", fcall);
 		v9fs_put_idpool(nfid, &v9ses->fidpool);
 		goto error;
@@ -640,19 +646,26 @@ static struct dentry *v9fs_vfs_lookup(st
 	}
 
 	result = v9fs_t_walk(v9ses, dirfidnum, newfid,
-		(char *)dentry->d_name.name, NULL);
+		(char *)dentry->d_name.name, &fcall);
+
 	if (result < 0) {
-		v9fs_put_idpool(newfid, &v9ses->fidpool);
+		if (fcall && fcall->id == RWALK)
+			v9fs_t_clunk(v9ses, newfid);
+		else
+			v9fs_put_idpool(newfid, &v9ses->fidpool);
+
 		if (result == -ENOENT) {
 			d_add(dentry, NULL);
 			dprintk(DEBUG_VFS,
 				"Return negative dentry %p count %d\n",
 				dentry, atomic_read(&dentry->d_count));
+			kfree(fcall);
 			return NULL;
 		}
 		dprintk(DEBUG_ERROR, "walk error:%d\n", result);
 		goto FreeFcall;
 	}
+	kfree(fcall);
 
 	result = v9fs_t_stat(v9ses, newfid, &fcall);
 	if (result < 0) {
diff --git a/fs/Makefile b/fs/Makefile
index 83bf478..078d3d1 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_DNOTIFY)		+= dnotify.o
 obj-$(CONFIG_PROC_FS)		+= proc/
 obj-y				+= partitions/
 obj-$(CONFIG_SYSFS)		+= sysfs/
+obj-$(CONFIG_CONFIGFS_FS)	+= configfs/
 obj-y				+= devpts/
 
 obj-$(CONFIG_PROFILING)		+= dcookies.o
@@ -100,5 +101,4 @@ obj-$(CONFIG_BEFS_FS)		+= befs/
 obj-$(CONFIG_HOSTFS)		+= hostfs/
 obj-$(CONFIG_HPPFS)		+= hppfs/
 obj-$(CONFIG_DEBUG_FS)		+= debugfs/
-obj-$(CONFIG_CONFIGFS_FS)	+= configfs/
 obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index 57c4903..d6603d0 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -74,8 +74,8 @@ struct autofs_wait_queue {
 	struct autofs_wait_queue *next;
 	autofs_wqt_t wait_queue_token;
 	/* We use the following to see what we are waiting for */
-	int hash;
-	int len;
+	unsigned int hash;
+	unsigned int len;
 	char *name;
 	u32 dev;
 	u64 ino;
@@ -85,7 +85,6 @@ struct autofs_wait_queue {
 	pid_t tgid;
 	/* This is for status reporting upon return */
 	int status;
-	atomic_t notify;
 	atomic_t wait_ctr;
 };
 
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 84e030c..5100f98 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -327,6 +327,7 @@ static int try_to_fill_dentry(struct den
 static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 {
 	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
+	struct autofs_info *ino = autofs4_dentry_ino(dentry);
 	int oz_mode = autofs4_oz_mode(sbi);
 	unsigned int lookup_type;
 	int status;
@@ -340,13 +341,8 @@ static void *autofs4_follow_link(struct 
 	if (oz_mode || !lookup_type)
 		goto done;
 
-	/*
-	 * If a request is pending wait for it.
-	 * If it's a mount then it won't be expired till at least
-	 * a liitle later and if it's an expire then we might need
-	 * to mount it again.
-	 */
-	if (autofs4_ispending(dentry)) {
+	/* If an expire request is pending wait for it. */
+	if (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
 		DPRINTK("waiting for active request %p name=%.*s",
 			dentry, dentry->d_name.len, dentry->d_name.name);
 
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 142ab6a..ce103e7 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -189,14 +189,30 @@ static int autofs4_getpath(struct autofs
 	return len;
 }
 
+static struct autofs_wait_queue *
+autofs4_find_wait(struct autofs_sb_info *sbi,
+		  char *name, unsigned int hash, unsigned int len)
+{
+	struct autofs_wait_queue *wq;
+
+	for (wq = sbi->queues; wq; wq = wq->next) {
+		if (wq->hash == hash &&
+		    wq->len == len &&
+		    wq->name && !memcmp(wq->name, name, len))
+			break;
+	}
+	return wq;
+}
+
 int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		enum autofs_notify notify)
 {
+	struct autofs_info *ino;
 	struct autofs_wait_queue *wq;
 	char *name;
 	unsigned int len = 0;
 	unsigned int hash = 0;
-	int status;
+	int status, type;
 
 	/* In catatonic mode, we don't wait for nobody */
 	if (sbi->catatonic)
@@ -223,21 +239,41 @@ int autofs4_wait(struct autofs_sb_info *
 		return -EINTR;
 	}
 
-	for (wq = sbi->queues ; wq ; wq = wq->next) {
-		if (wq->hash == dentry->d_name.hash &&
-		    wq->len == len &&
-		    wq->name && !memcmp(wq->name, name, len))
-			break;
-	}
+	wq = autofs4_find_wait(sbi, name, hash, len);
+	ino = autofs4_dentry_ino(dentry);
+	if (!wq && ino && notify == NFY_NONE) {
+		/*
+		 * Either we've betean the pending expire to post it's
+		 * wait or it finished while we waited on the mutex.
+		 * So we need to wait till either, the wait appears
+		 * or the expire finishes.
+		 */
+
+		while (ino->flags & AUTOFS_INF_EXPIRING) {
+			mutex_unlock(&sbi->wq_mutex);
+			schedule_timeout_interruptible(HZ/10);
+			if (mutex_lock_interruptible(&sbi->wq_mutex)) {
+				kfree(name);
+				return -EINTR;
+			}
+			wq = autofs4_find_wait(sbi, name, hash, len);
+			if (wq)
+				break;
+		}
 
-	if (!wq) {
-		/* Can't wait for an expire if there's no mount */
-		if (notify == NFY_NONE && !d_mountpoint(dentry)) {
+		/*
+		 * Not ideal but the status has already gone. Of the two
+		 * cases where we wait on NFY_NONE neither depend on the
+		 * return status of the wait.
+		 */
+		if (!wq) {
 			kfree(name);
 			mutex_unlock(&sbi->wq_mutex);
-			return -ENOENT;
+			return 0;
 		}
+	}
 
+	if (!wq) {
 		/* Create a new wait queue */
 		wq = kmalloc(sizeof(struct autofs_wait_queue),GFP_KERNEL);
 		if (!wq) {
@@ -263,20 +299,7 @@ int autofs4_wait(struct autofs_sb_info *
 		wq->tgid = current->tgid;
 		wq->status = -EINTR; /* Status return if interrupted */
 		atomic_set(&wq->wait_ctr, 2);
-		atomic_set(&wq->notify, 1);
-		mutex_unlock(&sbi->wq_mutex);
-	} else {
-		atomic_inc(&wq->wait_ctr);
 		mutex_unlock(&sbi->wq_mutex);
-		kfree(name);
-		DPRINTK("existing wait id = 0x%08lx, name = %.*s, nfy=%d",
-			(unsigned long) wq->wait_queue_token, wq->len, wq->name, notify);
-	}
-
-	if (notify != NFY_NONE && atomic_read(&wq->notify)) {
-		int type;
-
-		atomic_dec(&wq->notify);
 
 		if (sbi->version < 5) {
 			if (notify == NFY_MOUNT)
@@ -299,6 +322,12 @@ int autofs4_wait(struct autofs_sb_info *
 
 		/* autofs4_notify_daemon() may block */
 		autofs4_notify_daemon(sbi, wq, type);
+	} else {
+		atomic_inc(&wq->wait_ctr);
+		mutex_unlock(&sbi->wq_mutex);
+		kfree(name);
+		DPRINTK("existing wait id = 0x%08lx, name = %.*s, nfy=%d",
+			(unsigned long) wq->wait_queue_token, wq->len, wq->name, notify);
 	}
 
 	/* wq->name is NULL if and only if the lock is already released */
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 69f44dc..b1c902e 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -428,7 +428,6 @@ static int load_flat_file(struct linux_b
 	loff_t fpos;
 	unsigned long start_code, end_code;
 	int ret;
-	int exec_fileno;
 
 	hdr = ((struct flat_hdr *) bprm->buf);		/* exec-header */
 	inode = bprm->file->f_dentry->d_inode;
@@ -502,21 +501,12 @@ #endif
 		goto err;
 	}
 
-	/* check file descriptor */
-	exec_fileno = get_unused_fd();
-	if (exec_fileno < 0) {
-		ret = -EMFILE;
-		goto err;
-	}
-	get_file(bprm->file);
-	fd_install(exec_fileno, bprm->file);
-
 	/* Flush all traces of the currently running executable */
 	if (id == 0) {
 		result = flush_old_exec(bprm);
 		if (result) {
 			ret = result;
-			goto err_close;
+			goto err;
 		}
 
 		/* OK, This is the point of no return */
@@ -548,7 +538,7 @@ #endif
 				textpos = (unsigned long) -ENOMEM;
 			printk("Unable to mmap process text, errno %d\n", (int)-textpos);
 			ret = textpos;
-			goto err_close;
+			goto err;
 		}
 
 		down_write(&current->mm->mmap_sem);
@@ -564,7 +554,7 @@ #endif
 					(int)-datapos);
 			do_munmap(current->mm, textpos, text_len);
 			ret = realdatastart;
-			goto err_close;
+			goto err;
 		}
 		datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
 
@@ -587,7 +577,7 @@ #endif
 			do_munmap(current->mm, textpos, text_len);
 			do_munmap(current->mm, realdatastart, data_len + extra);
 			ret = result;
-			goto err_close;
+			goto err;
 		}
 
 		reloc = (unsigned long *) (datapos+(ntohl(hdr->reloc_start)-text_len));
@@ -606,7 +596,7 @@ #endif
 			printk("Unable to allocate RAM for process text/data, errno %d\n",
 					(int)-textpos);
 			ret = textpos;
-			goto err_close;
+			goto err;
 		}
 
 		realdatastart = textpos + ntohl(hdr->data_start);
@@ -652,7 +642,7 @@ #endif
 			do_munmap(current->mm, textpos, text_len + data_len + extra +
 				MAX_SHARED_LIBS * sizeof(unsigned long));
 			ret = result;
-			goto err_close;
+			goto err;
 		}
 	}
 
@@ -717,7 +707,7 @@ #endif
 				addr = calc_reloc(*rp, libinfo, id, 0);
 				if (addr == RELOC_FAILED) {
 					ret = -ENOEXEC;
-					goto err_close;
+					goto err;
 				}
 				*rp = addr;
 			}
@@ -747,7 +737,7 @@ #endif
 			rp = (unsigned long *) calc_reloc(addr, libinfo, id, 1);
 			if (rp == (unsigned long *)RELOC_FAILED) {
 				ret = -ENOEXEC;
-				goto err_close;
+				goto err;
 			}
 
 			/* Get the pointer's value.  */
@@ -762,7 +752,7 @@ #endif
 				addr = calc_reloc(addr, libinfo, id, 0);
 				if (addr == RELOC_FAILED) {
 					ret = -ENOEXEC;
-					goto err_close;
+					goto err;
 				}
 
 				/* Write back the relocated pointer.  */
@@ -783,8 +773,6 @@ #endif
 			stack_len);
 
 	return 0;
-err_close:
-	sys_close(exec_fileno);
 err:
 	return ret;
 }
diff --git a/fs/bio.c b/fs/bio.c
index eb8fbc5..098c12b 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1116,6 +1116,9 @@ struct bio_pair *bio_split(struct bio *b
 	bp->bio1.bi_io_vec = &bp->bv1;
 	bp->bio2.bi_io_vec = &bp->bv2;
 
+	bp->bio1.bi_max_vecs = 1;
+	bp->bio2.bi_max_vecs = 1;
+
 	bp->bio1.bi_end_io = bio_pair_end_1;
 	bp->bio2.bi_end_io = bio_pair_end_2;
 
diff --git a/fs/compat.c b/fs/compat.c
index 970888a..b1f6478 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1913,7 +1913,7 @@ asmlinkage long compat_sys_ppoll(struct 
 	}
 
 	if (sigmask) {
-		if (sigsetsize |= sizeof(compat_sigset_t))
+		if (sigsetsize != sizeof(compat_sigset_t))
 			return -EINVAL;
 		if (copy_from_user(&ss32, sigmask, sizeof(ss32)))
 			return -EFAULT;
@@ -2030,109 +2030,115 @@ union compat_nfsctl_res {
 	struct knfsd_fh		cr32_getfs;
 };
 
-static int compat_nfs_svc_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_svc_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
 {
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_svc, sizeof(arg->ca32_svc));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __get_user(karg->ca_svc.svc_port, &arg->ca32_svc.svc32_port);
-	err |= __get_user(karg->ca_svc.svc_nthreads, &arg->ca32_svc.svc32_nthreads);
-	return (err) ? -EFAULT : 0;
+	if (!access_ok(VERIFY_READ, &arg->ca32_svc, sizeof(arg->ca32_svc)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__get_user(karg->ca_svc.svc_port, &arg->ca32_svc.svc32_port) ||
+		__get_user(karg->ca_svc.svc_nthreads,
+				&arg->ca32_svc.svc32_nthreads))
+		return -EFAULT;
+	return 0;
 }
 
-static int compat_nfs_clnt_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
-{
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_client, sizeof(arg->ca32_client));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __copy_from_user(&karg->ca_client.cl_ident[0],
-			  &arg->ca32_client.cl32_ident[0],
-			  NFSCLNT_IDMAX);
-	err |= __get_user(karg->ca_client.cl_naddr, &arg->ca32_client.cl32_naddr);
-	err |= __copy_from_user(&karg->ca_client.cl_addrlist[0],
-			  &arg->ca32_client.cl32_addrlist[0],
-			  (sizeof(struct in_addr) * NFSCLNT_ADDRMAX));
-	err |= __get_user(karg->ca_client.cl_fhkeytype,
-		      &arg->ca32_client.cl32_fhkeytype);
-	err |= __get_user(karg->ca_client.cl_fhkeylen,
-		      &arg->ca32_client.cl32_fhkeylen);
-	err |= __copy_from_user(&karg->ca_client.cl_fhkey[0],
-			  &arg->ca32_client.cl32_fhkey[0],
-			  NFSCLNT_KEYMAX);
+static int compat_nfs_clnt_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
+{
+	if (!access_ok(VERIFY_READ, &arg->ca32_client,
+			sizeof(arg->ca32_client)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__copy_from_user(&karg->ca_client.cl_ident[0],
+				&arg->ca32_client.cl32_ident[0],
+				NFSCLNT_IDMAX) ||
+		__get_user(karg->ca_client.cl_naddr,
+				&arg->ca32_client.cl32_naddr) ||
+		__copy_from_user(&karg->ca_client.cl_addrlist[0],
+				&arg->ca32_client.cl32_addrlist[0],
+				(sizeof(struct in_addr) * NFSCLNT_ADDRMAX)) ||
+		__get_user(karg->ca_client.cl_fhkeytype,
+				&arg->ca32_client.cl32_fhkeytype) ||
+		__get_user(karg->ca_client.cl_fhkeylen,
+				&arg->ca32_client.cl32_fhkeylen) ||
+		__copy_from_user(&karg->ca_client.cl_fhkey[0],
+				&arg->ca32_client.cl32_fhkey[0],
+				NFSCLNT_KEYMAX))
+		return -EFAULT;
 
-	return (err) ? -EFAULT : 0;
+	return 0;
 }
 
-static int compat_nfs_exp_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
-{
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_export, sizeof(arg->ca32_export));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __copy_from_user(&karg->ca_export.ex_client[0],
-			  &arg->ca32_export.ex32_client[0],
-			  NFSCLNT_IDMAX);
-	err |= __copy_from_user(&karg->ca_export.ex_path[0],
-			  &arg->ca32_export.ex32_path[0],
-			  NFS_MAXPATHLEN);
-	err |= __get_user(karg->ca_export.ex_dev,
-		      &arg->ca32_export.ex32_dev);
-	err |= __get_user(karg->ca_export.ex_ino,
-		      &arg->ca32_export.ex32_ino);
-	err |= __get_user(karg->ca_export.ex_flags,
-		      &arg->ca32_export.ex32_flags);
-	err |= __get_user(karg->ca_export.ex_anon_uid,
-		      &arg->ca32_export.ex32_anon_uid);
-	err |= __get_user(karg->ca_export.ex_anon_gid,
-		      &arg->ca32_export.ex32_anon_gid);
+static int compat_nfs_exp_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
+{
+	if (!access_ok(VERIFY_READ, &arg->ca32_export,
+				sizeof(arg->ca32_export)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__copy_from_user(&karg->ca_export.ex_client[0],
+				&arg->ca32_export.ex32_client[0],
+				NFSCLNT_IDMAX) ||
+		__copy_from_user(&karg->ca_export.ex_path[0],
+				&arg->ca32_export.ex32_path[0],
+				NFS_MAXPATHLEN) ||
+		__get_user(karg->ca_export.ex_dev,
+				&arg->ca32_export.ex32_dev) ||
+		__get_user(karg->ca_export.ex_ino,
+				&arg->ca32_export.ex32_ino) ||
+		__get_user(karg->ca_export.ex_flags,
+				&arg->ca32_export.ex32_flags) ||
+		__get_user(karg->ca_export.ex_anon_uid,
+				&arg->ca32_export.ex32_anon_uid) ||
+		__get_user(karg->ca_export.ex_anon_gid,
+				&arg->ca32_export.ex32_anon_gid))
+		return -EFAULT;
 	SET_UID(karg->ca_export.ex_anon_uid, karg->ca_export.ex_anon_uid);
 	SET_GID(karg->ca_export.ex_anon_gid, karg->ca_export.ex_anon_gid);
 
-	return (err) ? -EFAULT : 0;
+	return 0;
 }
 
-static int compat_nfs_getfd_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
-{
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_getfd, sizeof(arg->ca32_getfd));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __copy_from_user(&karg->ca_getfd.gd_addr,
-			  &arg->ca32_getfd.gd32_addr,
-			  (sizeof(struct sockaddr)));
-	err |= __copy_from_user(&karg->ca_getfd.gd_path,
-			  &arg->ca32_getfd.gd32_path,
-			  (NFS_MAXPATHLEN+1));
-	err |= __get_user(karg->ca_getfd.gd_version,
-		      &arg->ca32_getfd.gd32_version);
+static int compat_nfs_getfd_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
+{
+	if (!access_ok(VERIFY_READ, &arg->ca32_getfd,
+			sizeof(arg->ca32_getfd)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__copy_from_user(&karg->ca_getfd.gd_addr,
+				&arg->ca32_getfd.gd32_addr,
+				(sizeof(struct sockaddr))) ||
+		__copy_from_user(&karg->ca_getfd.gd_path,
+				&arg->ca32_getfd.gd32_path,
+				(NFS_MAXPATHLEN+1)) ||
+		__get_user(karg->ca_getfd.gd_version,
+				&arg->ca32_getfd.gd32_version))
+		return -EFAULT;
 
-	return (err) ? -EFAULT : 0;
+	return 0;
 }
 
-static int compat_nfs_getfs_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_getfs_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
 {
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_getfs, sizeof(arg->ca32_getfs));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __copy_from_user(&karg->ca_getfs.gd_addr,
-			  &arg->ca32_getfs.gd32_addr,
-			  (sizeof(struct sockaddr)));
-	err |= __copy_from_user(&karg->ca_getfs.gd_path,
-			  &arg->ca32_getfs.gd32_path,
-			  (NFS_MAXPATHLEN+1));
-	err |= __get_user(karg->ca_getfs.gd_maxlen,
-		      &arg->ca32_getfs.gd32_maxlen);
+	if (!access_ok(VERIFY_READ,&arg->ca32_getfs,sizeof(arg->ca32_getfs)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__copy_from_user(&karg->ca_getfs.gd_addr,
+				&arg->ca32_getfs.gd32_addr,
+				(sizeof(struct sockaddr))) ||
+		__copy_from_user(&karg->ca_getfs.gd_path,
+				&arg->ca32_getfs.gd32_path,
+				(NFS_MAXPATHLEN+1)) ||
+		__get_user(karg->ca_getfs.gd_maxlen,
+				&arg->ca32_getfs.gd32_maxlen))
+		return -EFAULT;
 
-	return (err) ? -EFAULT : 0;
+	return 0;
 }
 
 /* This really doesn't need translations, we are only passing
  * back a union which contains opaque nfs file handle data.
  */
-static int compat_nfs_getfh_res_trans(union nfsctl_res *kres, union compat_nfsctl_res __user *res)
+static int compat_nfs_getfh_res_trans(union nfsctl_res *kres,
+				union compat_nfsctl_res __user *res)
 {
 	int err;
 
@@ -2141,8 +2147,9 @@ static int compat_nfs_getfh_res_trans(un
 	return (err) ? -EFAULT : 0;
 }
 
-asmlinkage long compat_sys_nfsservctl(int cmd, struct compat_nfsctl_arg __user *arg,
-					union compat_nfsctl_res __user *res)
+asmlinkage long compat_sys_nfsservctl(int cmd,
+				struct compat_nfsctl_arg __user *arg,
+				union compat_nfsctl_res __user *res)
 {
 	struct nfsctl_arg *karg;
 	union nfsctl_res *kres;
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 5638c8f..5f95218 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -505,13 +505,15 @@ static int populate_groups(struct config
 	int i;
 
 	if (group->default_groups) {
-		/* FYI, we're faking mkdir here
+		/*
+		 * FYI, we're faking mkdir here
 		 * I'm not sure we need this semaphore, as we're called
 		 * from our parent's mkdir.  That holds our parent's
 		 * i_mutex, so afaik lookup cannot continue through our
 		 * parent to find us, let alone mess with our tree.
 		 * That said, taking our i_mutex is closer to mkdir
-		 * emulation, and shouldn't hurt. */
+		 * emulation, and shouldn't hurt.
+		 */
 		mutex_lock(&dentry->d_inode->i_mutex);
 
 		for (i = 0; group->default_groups[i]; i++) {
@@ -546,20 +548,34 @@ static void unlink_obj(struct config_ite
 
 		item->ci_group = NULL;
 		item->ci_parent = NULL;
+
+		/* Drop the reference for ci_entry */
 		config_item_put(item);
 
+		/* Drop the reference for ci_parent */
 		config_group_put(group);
 	}
 }
 
 static void link_obj(struct config_item *parent_item, struct config_item *item)
 {
-	/* Parent seems redundant with group, but it makes certain
-	 * traversals much nicer. */
+	/*
+	 * Parent seems redundant with group, but it makes certain
+	 * traversals much nicer.
+	 */
 	item->ci_parent = parent_item;
+
+	/*
+	 * We hold a reference on the parent for the child's ci_parent
+	 * link.
+	 */
 	item->ci_group = config_group_get(to_config_group(parent_item));
 	list_add_tail(&item->ci_entry, &item->ci_group->cg_children);
 
+	/*
+	 * We hold a reference on the child for ci_entry on the parent's
+	 * cg_children
+	 */
 	config_item_get(item);
 }
 
@@ -684,6 +700,10 @@ static void client_drop_item(struct conf
 	type = parent_item->ci_type;
 	BUG_ON(!type);
 
+	/*
+	 * If ->drop_item() exists, it is responsible for the
+	 * config_item_put().
+	 */
 	if (type->ct_group_ops && type->ct_group_ops->drop_item)
 		type->ct_group_ops->drop_item(to_config_group(parent_item),
 						item);
@@ -694,23 +714,28 @@ static void client_drop_item(struct conf
 
 static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 {
-	int ret;
+	int ret, module_got = 0;
 	struct config_group *group;
 	struct config_item *item;
 	struct config_item *parent_item;
 	struct configfs_subsystem *subsys;
 	struct configfs_dirent *sd;
 	struct config_item_type *type;
-	struct module *owner;
+	struct module *owner = NULL;
 	char *name;
 
-	if (dentry->d_parent == configfs_sb->s_root)
-		return -EPERM;
+	if (dentry->d_parent == configfs_sb->s_root) {
+		ret = -EPERM;
+		goto out;
+	}
 
 	sd = dentry->d_parent->d_fsdata;
-	if (!(sd->s_type & CONFIGFS_USET_DIR))
-		return -EPERM;
+	if (!(sd->s_type & CONFIGFS_USET_DIR)) {
+		ret = -EPERM;
+		goto out;
+	}
 
+	/* Get a working ref for the duration of this function */
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	type = parent_item->ci_type;
 	subsys = to_config_group(parent_item)->cg_subsys;
@@ -719,15 +744,16 @@ static int configfs_mkdir(struct inode *
 	if (!type || !type->ct_group_ops ||
 	    (!type->ct_group_ops->make_group &&
 	     !type->ct_group_ops->make_item)) {
-		config_item_put(parent_item);
-		return -EPERM;  /* What lack-of-mkdir returns */
+		ret = -EPERM;  /* Lack-of-mkdir returns -EPERM */
+		goto out_put;
 	}
 
 	name = kmalloc(dentry->d_name.len + 1, GFP_KERNEL);
 	if (!name) {
-		config_item_put(parent_item);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_put;
 	}
+
 	snprintf(name, dentry->d_name.len + 1, "%s", dentry->d_name.name);
 
 	down(&subsys->su_sem);
@@ -748,40 +774,67 @@ static int configfs_mkdir(struct inode *
 
 	kfree(name);
 	if (!item) {
-		config_item_put(parent_item);
-		return -ENOMEM;
+		/*
+		 * If item == NULL, then link_obj() was never called.
+		 * There are no extra references to clean up.
+		 */
+		ret = -ENOMEM;
+		goto out_put;
 	}
 
-	ret = -EINVAL;
+	/*
+	 * link_obj() has been called (via link_group() for groups).
+	 * From here on out, errors must clean that up.
+	 */
+
 	type = item->ci_type;
-	if (type) {
-		owner = type->ct_owner;
-		if (try_module_get(owner)) {
-			if (group) {
-				ret = configfs_attach_group(parent_item,
-							    item,
-							    dentry);
-			} else {
-				ret = configfs_attach_item(parent_item,
-							   item,
-							   dentry);
-			}
+	if (!type) {
+		ret = -EINVAL;
+		goto out_unlink;
+	}
 
-			if (ret) {
-				down(&subsys->su_sem);
-				if (group)
-					unlink_group(group);
-				else
-					unlink_obj(item);
-				client_drop_item(parent_item, item);
-				up(&subsys->su_sem);
+	owner = type->ct_owner;
+	if (!try_module_get(owner)) {
+		ret = -EINVAL;
+		goto out_unlink;
+	}
 
-				config_item_put(parent_item);
-				module_put(owner);
-			}
-		}
+	/*
+	 * I hate doing it this way, but if there is
+	 * an error,  module_put() probably should
+	 * happen after any cleanup.
+	 */
+	module_got = 1;
+
+	if (group)
+		ret = configfs_attach_group(parent_item, item, dentry);
+	else
+		ret = configfs_attach_item(parent_item, item, dentry);
+
+out_unlink:
+	if (ret) {
+		/* Tear down everything we built up */
+		down(&subsys->su_sem);
+		if (group)
+			unlink_group(group);
+		else
+			unlink_obj(item);
+		client_drop_item(parent_item, item);
+		up(&subsys->su_sem);
+
+		if (module_got)
+			module_put(owner);
 	}
 
+out_put:
+	/*
+	 * link_obj()/link_group() took a reference from child->parent,
+	 * so the parent is safely pinned.  We can drop our working
+	 * reference.
+	 */
+	config_item_put(parent_item);
+
+out:
 	return ret;
 }
 
@@ -801,6 +854,7 @@ static int configfs_rmdir(struct inode *
 	if (sd->s_type & CONFIGFS_USET_DEFAULT)
 		return -EPERM;
 
+	/* Get a working ref until we have the child */
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	subsys = to_config_group(parent_item)->cg_subsys;
 	BUG_ON(!subsys);
@@ -817,6 +871,7 @@ static int configfs_rmdir(struct inode *
 		return ret;
 	}
 
+	/* Get a working ref for the duration of this function */
 	item = configfs_get_config_item(dentry);
 
 	/* Drop reference from above, item already holds one. */
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index b06b54f..4c39009 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -102,7 +102,7 @@ find_exported_dentry(struct super_block 
 		if (acceptable(context, result))
 			return result;
 		if (S_ISDIR(result->d_inode->i_mode)) {
-			/* there is no other dentry, so fail */
+			err = -EACCES;
 			goto err_result;
 		}
 
diff --git a/fs/inotify.c b/fs/inotify.c
index 1f50302..732ec4b 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c
@@ -848,7 +848,11 @@ static int inotify_release(struct inode 
 		inode = watch->inode;
 		mutex_lock(&inode->inotify_mutex);
 		mutex_lock(&dev->mutex);
-		remove_watch_no_event(watch, dev);
+
+		/* make sure we didn't race with another list removal */
+		if (likely(idr_find(&dev->idr, watch->wd)))
+			remove_watch_no_event(watch, dev);
+
 		mutex_unlock(&dev->mutex);
 		mutex_unlock(&inode->inotify_mutex);
 		put_inotify_watch(watch);
@@ -890,8 +894,7 @@ static int inotify_ignore(struct inotify
 	mutex_lock(&dev->mutex);
 
 	/* make sure that we did not race */
-	watch = idr_find(&dev->idr, wd);
-	if (likely(watch))
+	if (likely(idr_find(&dev->idr, wd) == watch))
 		remove_watch(watch, dev);
 
 	mutex_unlock(&dev->mutex);
diff --git a/fs/jffs2/nodelist.c b/fs/jffs2/nodelist.c
index d4d0c41..1d46677 100644
--- a/fs/jffs2/nodelist.c
+++ b/fs/jffs2/nodelist.c
@@ -438,7 +438,8 @@ #ifndef __ECOS
 	if (c->mtd->point) {
 		err = c->mtd->point(c->mtd, ofs, len, &retlen, &buffer);
 		if (!err && retlen < tn->csize) {
-			JFFS2_WARNING("MTD point returned len too short: %u instead of %u.\n", retlen, tn->csize);
+			JFFS2_WARNING("MTD point returned len too short: %zu "
+					"instead of %u.\n", retlen, tn->csize);
 			c->mtd->unpoint(c->mtd, buffer, ofs, len);
 		} else if (err)
 			JFFS2_WARNING("MTD point failed: error code %d.\n", err);
@@ -461,7 +462,8 @@ #endif
 		}
 
 		if (retlen != len) {
-			JFFS2_ERROR("short read at %#08x: %d instead of %d.\n", ofs, retlen, len);
+			JFFS2_ERROR("short read at %#08x: %zd instead of %d.\n",
+					ofs, retlen, len);
 			err = -EIO;
 			goto free_out;
 		}
diff --git a/fs/namespace.c b/fs/namespace.c
index 2c5f1f8..bf478ad 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -899,13 +899,11 @@ static int do_change_type(struct nameida
 /*
  * do loopback mount.
  */
-static int do_loopback(struct nameidata *nd, char *old_name, unsigned long flags, int mnt_flags)
+static int do_loopback(struct nameidata *nd, char *old_name, int recurse)
 {
 	struct nameidata old_nd;
 	struct vfsmount *mnt = NULL;
-	int recurse = flags & MS_REC;
 	int err = mount_is_safe(nd);
-
 	if (err)
 		return err;
 	if (!old_name || !*old_name)
@@ -939,7 +937,6 @@ static int do_loopback(struct nameidata 
 		spin_unlock(&vfsmount_lock);
 		release_mounts(&umount_list);
 	}
-	mnt->mnt_flags = mnt_flags;
 
 out:
 	up_write(&namespace_sem);
@@ -1353,7 +1350,7 @@ long do_mount(char *dev_name, char *dir_
 		retval = do_remount(&nd, flags & ~MS_REMOUNT, mnt_flags,
 				    data_page);
 	else if (flags & MS_BIND)
-		retval = do_loopback(&nd, dev_name, flags, mnt_flags);
+		retval = do_loopback(&nd, dev_name, flags & MS_REC);
 	else if (flags & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
 		retval = do_change_type(&nd, flags);
 	else if (flags & MS_MOVE)
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 4e05781..3eec300 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -1066,9 +1066,11 @@ exp_pseudoroot(struct auth_domain *clp, 
 		rv = nfserr_perm;
 	else if (IS_ERR(exp))
 		rv = nfserrno(PTR_ERR(exp));
-	else
+	else {
 		rv = fh_compose(fhp, exp,
 				fsid_key->ek_dentry, NULL);
+		exp_put(exp);
+	}
 	cache_put(&fsid_key->h, &svc_expkey_cache);
 	return rv;
 }
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 6aa92d0..1d65f13 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1922,11 +1922,10 @@ nfsd_set_posix_acl(struct svc_fh *fhp, i
 		value = kmalloc(size, GFP_KERNEL);
 		if (!value)
 			return -ENOMEM;
-		size = posix_acl_to_xattr(acl, value, size);
-		if (size < 0) {
-			error = size;
+		error = posix_acl_to_xattr(acl, value, size);
+		if (error < 0)
 			goto getout;
-		}
+		size = error;
 	} else
 		size = 0;
 
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 0d858d0..47152bf 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -276,13 +276,29 @@ static int ocfs2_writepage(struct page *
 	return ret;
 }
 
+/* This can also be called from ocfs2_write_zero_page() which has done
+ * it's own cluster locking. */
+int ocfs2_prepare_write_nolock(struct inode *inode, struct page *page,
+			       unsigned from, unsigned to)
+{
+	int ret;
+
+	down_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+	ret = block_prepare_write(page, from, to, ocfs2_get_block);
+
+	up_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+	return ret;
+}
+
 /*
  * ocfs2_prepare_write() can be an outer-most ocfs2 call when it is called
  * from loopback.  It must be able to perform its own locking around
  * ocfs2_get_block().
  */
-int ocfs2_prepare_write(struct file *file, struct page *page,
-			unsigned from, unsigned to)
+static int ocfs2_prepare_write(struct file *file, struct page *page,
+			       unsigned from, unsigned to)
 {
 	struct inode *inode = page->mapping->host;
 	int ret;
@@ -295,11 +311,7 @@ int ocfs2_prepare_write(struct file *fil
 		goto out;
 	}
 
-	down_read(&OCFS2_I(inode)->ip_alloc_sem);
-
-	ret = block_prepare_write(page, from, to, ocfs2_get_block);
-
-	up_read(&OCFS2_I(inode)->ip_alloc_sem);
+	ret = ocfs2_prepare_write_nolock(inode, page, from, to);
 
 	ocfs2_meta_unlock(inode, 0);
 out:
@@ -625,11 +637,31 @@ static ssize_t ocfs2_direct_IO(int rw,
 	int ret;
 
 	mlog_entry_void();
+
+	/*
+	 * We get PR data locks even for O_DIRECT.  This allows
+	 * concurrent O_DIRECT I/O but doesn't let O_DIRECT with
+	 * extending and buffered zeroing writes race.  If they did
+	 * race then the buffered zeroing could be written back after
+	 * the O_DIRECT I/O.  It's one thing to tell people not to mix
+	 * buffered and O_DIRECT writes, but expecting them to
+	 * understand that file extension is also an implicit buffered
+	 * write is too much.  By getting the PR we force writeback of
+	 * the buffered zeroing before proceeding.
+	 */
+	ret = ocfs2_data_lock(inode, 0);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+	ocfs2_data_unlock(inode, 0);
+
 	ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
 					    inode->i_sb->s_bdev, iov, offset,
 					    nr_segs, 
 					    ocfs2_direct_IO_get_blocks,
 					    ocfs2_dio_end_io);
+out:
 	mlog_exit(ret);
 	return ret;
 }
diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h
index d40456d..e88c3f0 100644
--- a/fs/ocfs2/aops.h
+++ b/fs/ocfs2/aops.h
@@ -22,8 +22,8 @@
 #ifndef OCFS2_AOPS_H
 #define OCFS2_AOPS_H
 
-int ocfs2_prepare_write(struct file *file, struct page *page,
-			unsigned from, unsigned to);
+int ocfs2_prepare_write_nolock(struct inode *inode, struct page *page,
+			       unsigned from, unsigned to);
 
 struct ocfs2_journal_handle *ocfs2_start_walk_page_trans(struct inode *inode,
 							 struct page *page,
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 4601fc2..1a5c690 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -569,7 +569,7 @@ static int ocfs2_extent_map_insert(struc
 
 	ret = -ENOMEM;
 	ctxt.new_ent = kmem_cache_alloc(ocfs2_em_ent_cachep,
-					GFP_KERNEL);
+					GFP_NOFS);
 	if (!ctxt.new_ent) {
 		mlog_errno(ret);
 		return ret;
@@ -583,14 +583,14 @@ static int ocfs2_extent_map_insert(struc
 		if (ctxt.need_left && !ctxt.left_ent) {
 			ctxt.left_ent =
 				kmem_cache_alloc(ocfs2_em_ent_cachep,
-						 GFP_KERNEL);
+						 GFP_NOFS);
 			if (!ctxt.left_ent)
 				break;
 		}
 		if (ctxt.need_right && !ctxt.right_ent) {
 			ctxt.right_ent =
 				kmem_cache_alloc(ocfs2_em_ent_cachep,
-						 GFP_KERNEL);
+						 GFP_NOFS);
 			if (!ctxt.right_ent)
 				break;
 		}
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 581eb45..a9559c8 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -613,7 +613,8 @@ leave:
 
 /* Some parts of this taken from generic_cont_expand, which turned out
  * to be too fragile to do exactly what we need without us having to
- * worry about recursive locking in ->commit_write(). */
+ * worry about recursive locking in ->prepare_write() and
+ * ->commit_write(). */
 static int ocfs2_write_zero_page(struct inode *inode,
 				 u64 size)
 {
@@ -641,7 +642,7 @@ static int ocfs2_write_zero_page(struct 
 		goto out;
 	}
 
-	ret = ocfs2_prepare_write(NULL, page, offset, offset);
+	ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
 	if (ret < 0) {
 		mlog_errno(ret);
 		goto out_unlock;
@@ -695,13 +696,26 @@ out:
 	return ret;
 }
 
+/* 
+ * A tail_to_skip value > 0 indicates that we're being called from
+ * ocfs2_file_aio_write(). This has the following implications:
+ *
+ * - we don't want to update i_size
+ * - di_bh will be NULL, which is fine because it's only used in the
+ *   case where we want to update i_size.
+ * - ocfs2_zero_extend() will then only be filling the hole created
+ *   between i_size and the start of the write.
+ */
 static int ocfs2_extend_file(struct inode *inode,
 			     struct buffer_head *di_bh,
-			     u64 new_i_size)
+			     u64 new_i_size,
+			     size_t tail_to_skip)
 {
 	int ret = 0;
 	u32 clusters_to_add;
 
+	BUG_ON(!tail_to_skip && !di_bh);
+
 	/* setattr sometimes calls us like this. */
 	if (new_i_size == 0)
 		goto out;
@@ -714,27 +728,44 @@ static int ocfs2_extend_file(struct inod
 		OCFS2_I(inode)->ip_clusters;
 
 	if (clusters_to_add) {
-		ret = ocfs2_extend_allocation(inode, clusters_to_add);
+		/* 
+		 * protect the pages that ocfs2_zero_extend is going to
+		 * be pulling into the page cache.. we do this before the
+		 * metadata extend so that we don't get into the situation
+		 * where we've extended the metadata but can't get the data
+		 * lock to zero.
+		 */
+		ret = ocfs2_data_lock(inode, 1);
 		if (ret < 0) {
 			mlog_errno(ret);
 			goto out;
 		}
 
-		ret = ocfs2_zero_extend(inode, new_i_size);
+		ret = ocfs2_extend_allocation(inode, clusters_to_add);
 		if (ret < 0) {
 			mlog_errno(ret);
-			goto out;
+			goto out_unlock;
 		}
-	} 
 
-	/* No allocation required, we just use this helper to
-	 * do a trivial update of i_size. */
-	ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out;
+		ret = ocfs2_zero_extend(inode, (u64)new_i_size - tail_to_skip);
+		if (ret < 0) {
+			mlog_errno(ret);
+			goto out_unlock;
+		}
+	}
+
+	if (!tail_to_skip) {
+		/* We're being called from ocfs2_setattr() which wants
+		 * us to update i_size */
+		ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
+		if (ret < 0)
+			mlog_errno(ret);
 	}
 
+out_unlock:
+	if (clusters_to_add) /* this is the only case in which we lock */
+		ocfs2_data_unlock(inode, 1);
+
 out:
 	return ret;
 }
@@ -793,7 +824,7 @@ #define OCFS2_VALID_ATTRS (ATTR_ATIME | 
 		if (i_size_read(inode) > attr->ia_size)
 			status = ocfs2_truncate_file(inode, bh, attr->ia_size);
 		else
-			status = ocfs2_extend_file(inode, bh, attr->ia_size);
+			status = ocfs2_extend_file(inode, bh, attr->ia_size, 0);
 		if (status < 0) {
 			if (status != -ENOSPC)
 				mlog_errno(status);
@@ -1049,21 +1080,12 @@ static ssize_t ocfs2_file_aio_write(stru
 		if (!clusters)
 			break;
 
-		ret = ocfs2_extend_allocation(inode, clusters);
+		ret = ocfs2_extend_file(inode, NULL, newsize, count);
 		if (ret < 0) {
 			if (ret != -ENOSPC)
 				mlog_errno(ret);
 			goto out;
 		}
-
-		/* Fill any holes which would've been created by this
-		 * write. If we're O_APPEND, this will wind up
-		 * (correctly) being a noop. */
-		ret = ocfs2_zero_extend(inode, (u64) newsize - count);
-		if (ret < 0) {
-			mlog_errno(ret);
-			goto out;
-		}
 		break;
 	}
 
@@ -1146,6 +1168,22 @@ static ssize_t ocfs2_file_aio_read(struc
 		ocfs2_iocb_set_rw_locked(iocb);
 	}
 
+	/*
+	 * We're fine letting folks race truncates and extending
+	 * writes with read across the cluster, just like they can
+	 * locally. Hence no rw_lock during read.
+	 * 
+	 * Take and drop the meta data lock to update inode fields
+	 * like i_size. This allows the checks down below
+	 * generic_file_aio_read() a chance of actually working. 
+	 */
+	ret = ocfs2_meta_lock(inode, NULL, NULL, 0);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto bail;
+	}
+	ocfs2_meta_unlock(inode, 0);
+
 	ret = generic_file_aio_read(iocb, buf, count, iocb->ki_pos);
 	if (ret == -EINVAL)
 		mlog(ML_ERROR, "generic_file_aio_read returned -EINVAL\n");
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 6a610ae..eebc3cf 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -117,7 +117,7 @@ struct ocfs2_journal_handle *ocfs2_alloc
 {
 	struct ocfs2_journal_handle *retval = NULL;
 
-	retval = kcalloc(1, sizeof(*retval), GFP_KERNEL);
+	retval = kcalloc(1, sizeof(*retval), GFP_NOFS);
 	if (!retval) {
 		mlog(ML_ERROR, "Failed to allocate memory for journal "
 		     "handle!\n");
@@ -870,9 +870,11 @@ #define CONCURRENT_JOURNAL_FILL 32
 		if (p_blocks > CONCURRENT_JOURNAL_FILL)
 			p_blocks = CONCURRENT_JOURNAL_FILL;
 
+		/* We are reading journal data which should not
+		 * be put in the uptodate cache */
 		status = ocfs2_read_blocks(OCFS2_SB(inode->i_sb),
 					   p_blkno, p_blocks, bhs, 0,
-					   inode);
+					   NULL);
 		if (status < 0) {
 			mlog_errno(status);
 			goto bail;
@@ -982,7 +984,7 @@ static void ocfs2_queue_recovery_complet
 {
 	struct ocfs2_la_recovery_item *item;
 
-	item = kmalloc(sizeof(struct ocfs2_la_recovery_item), GFP_KERNEL);
+	item = kmalloc(sizeof(struct ocfs2_la_recovery_item), GFP_NOFS);
 	if (!item) {
 		/* Though we wish to avoid it, we are in fact safe in
 		 * skipping local alloc cleanup as fsck.ocfs2 is more
diff --git a/fs/ocfs2/uptodate.c b/fs/ocfs2/uptodate.c
index 04a684d..b8a00a7 100644
--- a/fs/ocfs2/uptodate.c
+++ b/fs/ocfs2/uptodate.c
@@ -337,7 +337,7 @@ static void __ocfs2_set_buffer_uptodate(
 	     (unsigned long long)oi->ip_blkno,
 	     (unsigned long long)block, expand_tree);
 
-	new = kmem_cache_alloc(ocfs2_uptodate_cachep, GFP_KERNEL);
+	new = kmem_cache_alloc(ocfs2_uptodate_cachep, GFP_NOFS);
 	if (!new) {
 		mlog_errno(-ENOMEM);
 		return;
@@ -349,7 +349,7 @@ static void __ocfs2_set_buffer_uptodate(
 		 * has no way of tracking that. */
 		for(i = 0; i < OCFS2_INODE_MAX_CACHE_ARRAY; i++) {
 			tree[i] = kmem_cache_alloc(ocfs2_uptodate_cachep,
-						   GFP_KERNEL);
+						   GFP_NOFS);
 			if (!tree[i]) {
 				mlog_errno(-ENOMEM);
 				goto out_free;
diff --git a/fs/ocfs2/vote.c b/fs/ocfs2/vote.c
index 53049a2..ee42765 100644
--- a/fs/ocfs2/vote.c
+++ b/fs/ocfs2/vote.c
@@ -586,7 +586,7 @@ static struct ocfs2_net_wait_ctxt *ocfs2
 {
 	struct ocfs2_net_wait_ctxt *w;
 
-	w = kcalloc(1, sizeof(*w), GFP_KERNEL);
+	w = kcalloc(1, sizeof(*w), GFP_NOFS);
 	if (!w) {
 		mlog_errno(-ENOMEM);
 		goto bail;
@@ -749,7 +749,7 @@ static struct ocfs2_vote_msg * ocfs2_new
 
 	BUG_ON(!ocfs2_is_valid_vote_request(type));
 
-	request = kcalloc(1, sizeof(*request), GFP_KERNEL);
+	request = kcalloc(1, sizeof(*request), GFP_NOFS);
 	if (!request) {
 		mlog_errno(-ENOMEM);
 	} else {
@@ -1129,7 +1129,7 @@ static int ocfs2_handle_vote_message(str
 	struct ocfs2_super *osb = data;
 	struct ocfs2_vote_work *work;
 
-	work = kmalloc(sizeof(struct ocfs2_vote_work), GFP_KERNEL);
+	work = kmalloc(sizeof(struct ocfs2_vote_work), GFP_NOFS);
 	if (!work) {
 		status = -ENOMEM;
 		mlog_errno(status);
diff --git a/fs/open.c b/fs/open.c
index 53ec28c..317b7c7 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1124,7 +1124,6 @@ asmlinkage long sys_openat(int dfd, cons
 	prevent_tail_call(ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(sys_openat);
 
 #ifndef __alpha__
 
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 45ae7dd..7ef1f09 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -533,6 +533,7 @@ void del_gendisk(struct gendisk *disk)
 
 	devfs_remove_disk(disk);
 
+	kobject_uevent(&disk->kobj, KOBJ_REMOVE);
 	if (disk->holder_dir)
 		kobject_unregister(disk->holder_dir);
 	if (disk->slave_dir)
@@ -545,7 +546,7 @@ void del_gendisk(struct gendisk *disk)
 			kfree(disk_name);
 		}
 		put_device(disk->driverfs_dev);
+		disk->driverfs_dev = NULL;
 	}
-	kobject_uevent(&disk->kobj, KOBJ_REMOVE);
 	kobject_del(&disk->kobj);
 }
diff --git a/fs/smbfs/dir.c b/fs/smbfs/dir.c
index 34c7a11..70d9c5a 100644
--- a/fs/smbfs/dir.c
+++ b/fs/smbfs/dir.c
@@ -434,6 +434,11 @@ smb_lookup(struct inode *dir, struct den
 	if (dentry->d_name.len > SMB_MAXNAMELEN)
 		goto out;
 
+	/* Do not allow lookup of names with backslashes in */
+	error = -EINVAL;
+	if (memchr(dentry->d_name.name, '\\', dentry->d_name.len))
+		goto out;
+
 	lock_kernel();
 	error = smb_proc_getattr(dentry, &finfo);
 #ifdef SMBFS_PARANOIA
diff --git a/fs/smbfs/request.c b/fs/smbfs/request.c
index c71c375..c71dd27 100644
--- a/fs/smbfs/request.c
+++ b/fs/smbfs/request.c
@@ -339,9 +339,11 @@ #endif
 		/*
 		 * On timeout or on interrupt we want to try and remove the
 		 * request from the recvq/xmitq.
+		 * First check if the request is still part of a queue. (May
+		 * have been removed by some error condition)
 		 */
 		smb_lock_server(server);
-		if (!(req->rq_flags & SMB_REQ_RECEIVED)) {
+		if (!list_empty(&req->rq_queue)) {
 			list_del_init(&req->rq_queue);
 			smb_rput(req);
 		}
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h
new file mode 100644
index 0000000..915590c
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PXA2XX_SPI_H_
+#define PXA2XX_SPI_H_
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+#if defined(CONFIG_PXA25x)
+#define CLOCK_SPEED_HZ 3686400
+#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00)
+#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP_TIMEOUT_SCALE (2712)
+#elif defined(CONFIG_PXA27x)
+#define CLOCK_SPEED_HZ 13000000
+#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP_TIMEOUT_SCALE (769)
+#endif
+
+#define SSP_TIMEOUT(x) ((x*10000)/SSP_TIMEOUT_SCALE)
+#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1)))))
+#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2)))))
+#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3)))))
+
+enum pxa_ssp_type {
+	SSP_UNDEFINED = 0,
+	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+	PXA27x_SSP,
+};
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+	enum pxa_ssp_type ssp_type;
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout_microsecs;
+	u8 enable_loopback;
+	void (*cs_control)(u32 command);
+};
+
+#endif /*PXA2XX_SPI_H_*/
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
new file mode 100644
index 0000000..258c00b
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi-gpio.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPIGPIO_H
+#define __ASM_ARCH_SPIGPIO_H __FILE__
+
+struct s3c2410_spigpio_info;
+struct spi_board_info;
+
+struct s3c2410_spigpio_info {
+	unsigned long		 pin_clk;
+	unsigned long		 pin_mosi;
+	unsigned long		 pin_miso;
+
+	unsigned long		 board_size;
+	struct spi_board_info	*board_info;
+
+	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+};
+
+
+#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
new file mode 100644
index 0000000..4029a1a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info;
+struct spi_board_info;
+
+struct s3c2410_spi_info {
+	unsigned long		 pin_cs;	/* simple gpio cs */
+
+	unsigned long		 board_size;
+	struct spi_board_info	*board_info;
+
+	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h
index a9c75b2..8425260 100644
--- a/include/asm-arm/procinfo.h
+++ b/include/asm-arm/procinfo.h
@@ -45,8 +45,6 @@ extern unsigned int elf_hwcap;
 
 #endif	/* __ASSEMBLY__ */
 
-#define PROC_INFO_SZ	48
-
 #define HWCAP_SWP	1
 #define HWCAP_HALF	2
 #define HWCAP_THUMB	4
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 43ad4e5..406ca97 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -142,6 +142,9 @@ #endif
 	: "cc");
 }
 
+/* write_can_lock - would write_trylock() succeed? */
+#define __raw_write_can_lock(x)		((x)->lock == 0x80000000)
+
 /*
  * Read locks are a bit more hairy:
  *  - Exclusively load the lock value.
@@ -198,4 +201,7 @@ #endif
 
 #define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
 
+/* read_can_lock - would read_trylock() succeed? */
+#define __raw_read_can_lock(x)		((x)->lock < 0x80000000)
+
 #endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 908acb4..edde246 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -321,8 +321,10 @@ #define __NR_symlinkat		295
 #define __NR_readlinkat		296
 #define __NR_fchmodat		297
 #define __NR_faccessat		298
+#define __NR_get_robust_list	299
+#define __NR_set_robust_list	300
 
-#define __NR_syscalls		299
+#define __NR_syscalls		301
 
 #ifdef __KERNEL__
 #define __NR__exit __NR_exit
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 657d582..41c2792 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -296,8 +296,14 @@ #define __NR_faccessat		300
 #define __NR_pselect6		301
 #define __NR_ppoll		302
 #define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
 
-#define NR_syscalls 304
+#define NR_syscalls 310
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index f5611a7..45a5765 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -316,11 +316,13 @@ #define __NR_faccessat		296
 #define __NR_pselect6		297
 #define __NR_ppoll		298
 #define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
 
-/* WARNING: You MAY NOT add syscall numbers larger than 299, since
+/* WARNING: You MAY NOT add syscall numbers larger than 301, since
  *          all of the syscall tables in the Sparc kernel are
- *          sized to have 299 entries (starting at zero).  Therefore
- *          find a free slot in the 0-299 range.
+ *          sized to have 301 entries (starting at zero).  Therefore
+ *          find a free slot in the 0-301 range.
  */
 
 #define _syscall0(type,name) \
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
index c7d5804..a8d39f2 100644
--- a/include/asm-sparc64/dma-mapping.h
+++ b/include/asm-sparc64/dma-mapping.h
@@ -4,7 +4,146 @@ #define _ASM_SPARC64_DMA_MAPPING_H
 #include <linux/config.h>
 
 #ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
+
+/* we implement the API below in terms of the existing PCI one,
+ * so include it */
+#include <linux/pci.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_dma_supported(to_pci_dev(dev), mask);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   gfp_t flag)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_iommu_ops->alloc_consistent(to_pci_dev(dev), size, dma_handle, flag);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		    dma_addr_t dma_handle)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction);
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
+				    size, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			   enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
+				       size, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline int
+dma_mapping_error(dma_addr_t dma_addr)
+{
+	return pci_dma_mapping_error(dma_addr);
+}
+
 #else
 
 struct device;
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
index 7c5a589..e1ea67b 100644
--- a/include/asm-sparc64/pci.h
+++ b/include/asm-sparc64/pci.h
@@ -42,7 +42,7 @@ #include <asm/scatterlist.h>
 struct pci_dev;
 
 struct pci_iommu_ops {
-	void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *);
+	void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *, gfp_t);
 	void (*free_consistent)(struct pci_dev *, size_t, void *, dma_addr_t);
 	dma_addr_t (*map_single)(struct pci_dev *, void *, size_t, int);
 	void (*unmap_single)(struct pci_dev *, dma_addr_t, size_t, int);
@@ -59,7 +59,7 @@ extern struct pci_iommu_ops *pci_iommu_o
  */
 static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle)
 {
-	return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle);
+	return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle, GFP_ATOMIC);
 }
 
 /* Free and unmap a consistent DMA buffer.
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index 6870574..998ef4a 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -318,11 +318,13 @@ #define __NR_faccessat		296
 #define __NR_pselect6		297
 #define __NR_ppoll		298
 #define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
 
-/* WARNING: You MAY NOT add syscall numbers larger than 299, since
+/* WARNING: You MAY NOT add syscall numbers larger than 301, since
  *          all of the syscall tables in the Sparc kernel are
- *          sized to have 299 entries (starting at zero).  Therefore
- *          find a free slot in the 0-299 range.
+ *          sized to have 301 entries (starting at zero).  Therefore
+ *          find a free slot in the 0-301 range.
  */
 
 #define _syscall0(type,name) \
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 2d71608..33d8f20 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -19,5 +19,4 @@ int request_firmware_nowait(
 	void (*cont)(const struct firmware *fw, void *context));
 
 void release_firmware(const struct firmware *fw);
-void register_firmware(const char *name, const u8 *data, size_t size);
 #endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3de2bfb..f813bc8 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -213,6 +213,10 @@ #define BMAP_IOCTL 1		/* obsolete - kept
 #define FIBMAP	   _IO(0x00,1)	/* bmap access */
 #define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
 
+#define SYNC_FILE_RANGE_WAIT_BEFORE	1
+#define SYNC_FILE_RANGE_WRITE		2
+#define SYNC_FILE_RANGE_WAIT_AFTER	4
+
 #ifdef __KERNEL__
 
 #include <linux/linkage.h>
@@ -758,9 +762,6 @@ extern int fcntl_setlease(unsigned int f
 extern int fcntl_getlease(struct file *filp);
 
 /* fs/sync.c */
-#define SYNC_FILE_RANGE_WAIT_BEFORE	1
-#define SYNC_FILE_RANGE_WRITE		2
-#define SYNC_FILE_RANGE_WAIT_AFTER	4
 extern int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
 			unsigned int flags);
 
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a3a0e07..16fbe59 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -110,5 +110,16 @@ struct fsl_usb2_platform_data {
 #define FSL_USB2_PORT0_ENABLED	0x00000001
 #define FSL_USB2_PORT1_ENABLED	0x00000002
 
+struct fsl_spi_platform_data {
+	u32 	initial_spmode;	/* initial SPMODE value */
+	u16	bus_num;
+
+	/* board specific information */
+	u16	max_chipselect;
+	void	(*activate_cs)(u8 cs, u8 polarity);
+	void	(*deactivate_cs)(u8 cs, u8 polarity);
+	u32	sysclk;
+};
+
 #endif				/* _FSL_DEVICE_H_ */
 #endif				/* __KERNEL__ */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e1bd084..f4fc576 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -124,6 +124,7 @@ extern int get_option(char **str, int *p
 extern char *get_options(const char *str, int nints, int *ints);
 extern unsigned long long memparse(char *ptr, char **retptr);
 
+extern int core_kernel_text(unsigned long addr);
 extern int __kernel_text_address(unsigned long addr);
 extern int kernel_text_address(unsigned long addr);
 extern int session_of_pgrp(int pgrp);
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index bdc556d..03a14a3 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -69,6 +69,7 @@ struct mmc_data {
 	unsigned int		timeout_ns;	/* data timeout (in ns, max 80ms) */
 	unsigned int		timeout_clks;	/* data timeout (in clocks) */
 	unsigned int		blksz_bits;	/* data block size */
+	unsigned int		blksz;		/* data block size */
 	unsigned int		blocks;		/* number of blocks */
 	unsigned int		error;		/* data error */
 	unsigned int		flags;
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index b5c2112..3674035 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -22,6 +22,7 @@ #define MAX_ORDER 11
 #else
 #define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
 #endif
+#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
 
 struct free_area {
 	struct list_head	free_list;
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 5673008..970284f 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -132,6 +132,7 @@ static inline void rcu_bh_qsctr_inc(int 
 }
 
 extern int rcu_pending(int cpu);
+extern int rcu_needs_cpu(int cpu);
 
 /**
  * rcu_read_lock - mark the beginning of an RCU read-side critical section.
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 3af03b1..2d985d5 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -150,6 +150,7 @@ static inline void *kcalloc(size_t n, si
 
 extern void kfree(const void *);
 extern unsigned int ksize(const void *);
+extern int slab_is_available(void);
 
 #ifdef CONFIG_NUMA
 extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index b05f146..e928c0d 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -31,18 +31,23 @@ extern struct bus_type spi_bus_type;
  * @master: SPI controller used with the device.
  * @max_speed_hz: Maximum clock rate to be used with this chip
  *	(on this board); may be changed by the device's driver.
+ *	The spi_transfer.speed_hz can override this for each transfer.
  * @chip-select: Chipselect, distinguishing chips handled by "master".
  * @mode: The spi mode defines how data is clocked out and in.
  *	This may be changed by the device's driver.
+ *	The "active low" default for chipselect mode can be overridden,
+ *	as can the "MSB first" default for each word in a transfer.
  * @bits_per_word: Data transfers involve one or more words; word sizes
- * 	like eight or 12 bits are common.  In-memory wordsizes are
+ *	like eight or 12 bits are common.  In-memory wordsizes are
  *	powers of two bytes (e.g. 20 bit samples use 32 bits).
- *	This may be changed by the device's driver.
+ *	This may be changed by the device's driver, or left at the
+ *	default (0) indicating protocol words are eight bit bytes.
+ *	The spi_transfer.bits_per_word can override this for each transfer.
  * @irq: Negative, or the number passed to request_irq() to receive
- * 	interrupts from this device.
+ *	interrupts from this device.
  * @controller_state: Controller's runtime state
  * @controller_data: Board-specific definitions for controller, such as
- * 	FIFO initialization parameters; from board_info.controller_data
+ *	FIFO initialization parameters; from board_info.controller_data
  *
  * An spi_device is used to interchange data between an SPI slave
  * (usually a discrete chip) and CPU memory.
@@ -65,6 +70,7 @@ #define	SPI_MODE_1	(0|SPI_CPHA)
 #define	SPI_MODE_2	(SPI_CPOL|0)
 #define	SPI_MODE_3	(SPI_CPOL|SPI_CPHA)
 #define	SPI_CS_HIGH	0x04			/* chipselect active high? */
+#define	SPI_LSB_FIRST	0x08			/* per-word bits-on-wire */
 	u8			bits_per_word;
 	int			irq;
 	void			*controller_state;
@@ -73,7 +79,6 @@ #define	SPI_CS_HIGH	0x04			/* chipselect
 
 	// likely need more hooks for more protocol options affecting how
 	// the controller talks to each chip, like:
-	//  - bit order (default is wordwise msb-first)
 	//  - memory packing (12 bit samples into low bits, others zeroed)
 	//  - priority
 	//  - drop chipselect after each word
@@ -143,13 +148,13 @@ static inline void spi_unregister_driver
  * struct spi_master - interface to SPI master controller
  * @cdev: class interface to this driver
  * @bus_num: board-specific (and often SOC-specific) identifier for a
- * 	given SPI controller.
+ *	given SPI controller.
  * @num_chipselect: chipselects are used to distinguish individual
- * 	SPI slaves, and are numbered from zero to num_chipselects.
- * 	each slave has a chipselect signal, but it's common that not
- * 	every chipselect is connected to a slave.
+ *	SPI slaves, and are numbered from zero to num_chipselects.
+ *	each slave has a chipselect signal, but it's common that not
+ *	every chipselect is connected to a slave.
  * @setup: updates the device mode and clocking records used by a
- * 	device's SPI controller; protocol code may call this.
+ *	device's SPI controller; protocol code may call this.
  * @transfer: adds a message to the controller's transfer queue.
  * @cleanup: frees controller-specific state
  *
@@ -167,13 +172,13 @@ static inline void spi_unregister_driver
 struct spi_master {
 	struct class_device	cdev;
 
-	/* other than zero (== assign one dynamically), bus_num is fully
+	/* other than negative (== assign one dynamically), bus_num is fully
 	 * board-specific.  usually that simplifies to being SOC-specific.
-	 * example:  one SOC has three SPI controllers, numbered 1..3,
+	 * example:  one SOC has three SPI controllers, numbered 0..2,
 	 * and one board's schematics might show it using SPI-2.  software
 	 * would normally use bus_num=2 for that controller.
 	 */
-	u16			bus_num;
+	s16			bus_num;
 
 	/* chipselects will be integral to many controllers; some others
 	 * might use board-specific GPIOs.
@@ -268,10 +273,14 @@ extern struct spi_master *spi_busnum_to_
  * @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped
  * @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped
  * @len: size of rx and tx buffers (in bytes)
+ * @speed_hz: Select a speed other then the device default for this
+ *      transfer. If 0 the default (from spi_device) is used.
+ * @bits_per_word: select a bits_per_word other then the device default
+ *      for this transfer. If 0 the default (from spi_device) is used.
  * @cs_change: affects chipselect after this transfer completes
  * @delay_usecs: microseconds to delay after this transfer before
- * 	(optionally) changing the chipselect status, then starting
- * 	the next transfer or completing this spi_message.
+ *	(optionally) changing the chipselect status, then starting
+ *	the next transfer or completing this spi_message.
  * @transfer_list: transfers are sequenced through spi_message.transfers
  *
  * SPI transfers always write the same number of bytes as they read.
@@ -322,7 +331,9 @@ struct spi_transfer {
 	dma_addr_t	rx_dma;
 
 	unsigned	cs_change:1;
+	u8		bits_per_word;
 	u16		delay_usecs;
+	u32		speed_hz;
 
 	struct list_head transfer_list;
 };
@@ -356,7 +367,7 @@ struct spi_transfer {
  * and its transfers, ignore them until its completion callback.
  */
 struct spi_message {
-	struct list_head 	transfers;
+	struct list_head	transfers;
 
 	struct spi_device	*spi;
 
@@ -374,7 +385,7 @@ struct spi_message {
 	 */
 
 	/* completion is reported through a callback */
-	void 			(*complete)(void *context);
+	void			(*complete)(void *context);
 	void			*context;
 	unsigned		actual_length;
 	int			status;
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index c961fe9..16ce178 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -30,6 +30,12 @@ struct spi_bitbang {
 
 	struct spi_master	*master;
 
+	/* setup_transfer() changes clock and/or wordsize to match settings
+	 * for this transfer; zeroes restore defaults from spi_device.
+	 */
+	int	(*setup_transfer)(struct spi_device *spi,
+			struct spi_transfer *t);
+
 	void	(*chipselect)(struct spi_device *spi, int is_on);
 #define	BITBANG_CS_ACTIVE	1	/* normally nCS, active low */
 #define	BITBANG_CS_INACTIVE	0
@@ -51,6 +57,8 @@ #define	BITBANG_CS_INACTIVE	0
 extern int spi_bitbang_setup(struct spi_device *spi);
 extern void spi_bitbang_cleanup(const struct spi_device *spi);
 extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+				      struct spi_transfer *t);
 
 /* start or stop queue processing */
 extern int spi_bitbang_start(struct spi_bitbang *spi);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 5b1fdf1..f03c247 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -296,7 +296,7 @@ #define swap_free(swp)				/*NOTHING*/
 #define read_swap_cache_async(swp,vma,addr)	NULL
 #define lookup_swap_cache(swp)			NULL
 #define valid_swaphandles(swp, off)		0
-#define can_share_swap_page(p)			0
+#define can_share_swap_page(p)			(page_mapcount(p) == 1)
 #define move_to_swap_cache(p, swp)		1
 #define move_from_swap_cache(p, i, m)		1
 #define __delete_from_swap_cache(p)		/*NOTHING*/
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 3996960..60d49e5 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -52,6 +52,7 @@ struct utimbuf;
 struct mq_attr;
 struct compat_stat;
 struct compat_timeval;
+struct robust_list_head;
 
 #include <linux/config.h>
 #include <linux/types.h>
@@ -581,5 +582,10 @@ asmlinkage long sys_tee(int fdin, int fd
 
 asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
 					unsigned int flags);
+asmlinkage long sys_get_robust_list(int pid,
+				    struct robust_list_head __user **head_ptr,
+				    size_t __user *len_ptr);
+asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
+				    size_t len);
 
 #endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index d7670ec..ad7fa9c 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1141,8 +1141,13 @@ extern char *v4l2_type_names[];
 /*  Compatibility layer interface  --  v4l1-compat module */
 typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
 			   unsigned int cmd, void *arg);
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
 			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
+#endif
 
 /* 32 Bits compatibility layer for 64 bits processors */
 extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h
index 86aefb1..c0c895d 100644
--- a/include/net/irda/irlmp.h
+++ b/include/net/irda/irlmp.h
@@ -112,7 +112,7 @@ #endif /* CONFIG_IRDA_ULTRA */
 
 	struct timer_list watchdog_timer;
 
-	IRLMP_STATE     lsap_state;  /* Connection state */
+	LSAP_STATE      lsap_state;  /* Connection state */
 	notify_t        notify;      /* Indication/Confirm entry points */
 	struct qos_info qos;         /* QoS for this connection */
 
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index b0666d6..4901ee4 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -211,6 +211,7 @@ #define NEIGH_UPDATE_F_ISROUTER			0x4000
 #define NEIGH_UPDATE_F_ADMIN			0x80000000
 
 extern void			neigh_table_init(struct neigh_table *tbl);
+extern void			neigh_table_init_no_netlink(struct neigh_table *tbl);
 extern int			neigh_table_clear(struct neigh_table *tbl);
 extern struct neighbour *	neigh_lookup(struct neigh_table *tbl,
 					     const void *pkey,
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 34a1a09..807d6f1 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -99,6 +99,7 @@ typedef enum {
 	SCTP_CMD_DEL_NON_PRIMARY, /* Removes non-primary peer transports. */
 	SCTP_CMD_T3_RTX_TIMERS_STOP, /* Stops T3-rtx pending timers */
 	SCTP_CMD_FORCE_PRIM_RETRAN,  /* Forces retrans. over primary path. */
+	SCTP_CMD_SET_SK_ERR,	 /* Set sk_err */
 	SCTP_CMD_LAST
 } sctp_verb_t;
 
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index e673b2c..aa6033c 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -461,12 +461,12 @@ static inline int sctp_frag_point(const 
  * there is room for a param header too.
  */
 #define sctp_walk_params(pos, chunk, member)\
-_sctp_walk_params((pos), (chunk), WORD_ROUND(ntohs((chunk)->chunk_hdr.length)), member)
+_sctp_walk_params((pos), (chunk), ntohs((chunk)->chunk_hdr.length), member)
 
 #define _sctp_walk_params(pos, chunk, end, member)\
 for (pos.v = chunk->member;\
      pos.v <= (void *)chunk + end - sizeof(sctp_paramhdr_t) &&\
-     pos.v <= (void *)chunk + end - WORD_ROUND(ntohs(pos.p->length)) &&\
+     pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\
      ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t);\
      pos.v += WORD_ROUND(ntohs(pos.p->length)))
 
@@ -477,7 +477,7 @@ #define _sctp_walk_errors(err, chunk_hdr
 for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
 	    sizeof(sctp_chunkhdr_t));\
      (void *)err <= (void *)chunk_hdr + end - sizeof(sctp_errhdr_t) &&\
-     (void *)err <= (void *)chunk_hdr + end - WORD_ROUND(ntohs(err->length)) &&\
+     (void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\
      ntohs(err->length) >= sizeof(sctp_errhdr_t); \
      err = (sctp_errhdr_t *)((void *)err + WORD_ROUND(ntohs(err->length))))
 
diff --git a/init/do_mounts.c b/init/do_mounts.c
index adb7cad..f4b7b9d 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -310,6 +310,11 @@ retry:
 
 		panic("VFS: Unable to mount root fs on %s", b);
 	}
+
+	printk("No filesystem could mount root, tried: ");
+	for (p = fs_names; *p; p += strlen(p)+1)
+		printk(" %s", p);
+	printk("\n");
 	panic("VFS: Unable to mount root fs on %s", __bdevname(ROOT_DEV, b));
 out:
 	putname(fs_names);
diff --git a/init/initramfs.c b/init/initramfs.c
index 679d870..f81cfa4 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -26,10 +26,12 @@ static void __init free(void *where)
 
 /* link hash */
 
+#define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
+
 static __initdata struct hash {
 	int ino, minor, major;
 	struct hash *next;
-	char *name;
+	char name[N_ALIGN(PATH_MAX)];
 } *head[32];
 
 static inline int hash(int major, int minor, int ino)
@@ -57,7 +59,7 @@ static char __init *find_link(int major,
 	q->ino = ino;
 	q->minor = minor;
 	q->major = major;
-	q->name = name;
+	strcpy(q->name, name);
 	q->next = NULL;
 	*p = q;
 	return NULL;
@@ -133,8 +135,6 @@ static inline void eat(unsigned n)
 	count -= n;
 }
 
-#define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
-
 static __initdata char *collected;
 static __initdata int remains;
 static __initdata char *collect;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 72248d1..ab81fdd 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2231,19 +2231,25 @@ static const struct cpuset *nearest_excl
  * So only GFP_KERNEL allocations, if all nodes in the cpuset are
  * short of memory, might require taking the callback_mutex mutex.
  *
- * The first loop over the zonelist in mm/page_alloc.c:__alloc_pages()
- * calls here with __GFP_HARDWALL always set in gfp_mask, enforcing
- * hardwall cpusets - no allocation on a node outside the cpuset is
- * allowed (unless in interrupt, of course).
- *
- * The second loop doesn't even call here for GFP_ATOMIC requests
- * (if the __alloc_pages() local variable 'wait' is set).  That check
- * and the checks below have the combined affect in the second loop of
- * the __alloc_pages() routine that:
+ * The first call here from mm/page_alloc:get_page_from_freelist()
+ * has __GFP_HARDWALL set in gfp_mask, enforcing hardwall cpusets, so
+ * no allocation on a node outside the cpuset is allowed (unless in
+ * interrupt, of course).
+ *
+ * The second pass through get_page_from_freelist() doesn't even call
+ * here for GFP_ATOMIC calls.  For those calls, the __alloc_pages()
+ * variable 'wait' is not set, and the bit ALLOC_CPUSET is not set
+ * in alloc_flags.  That logic and the checks below have the combined
+ * affect that:
  *	in_interrupt - any node ok (current task context irrelevant)
  *	GFP_ATOMIC   - any node ok
  *	GFP_KERNEL   - any node in enclosing mem_exclusive cpuset ok
  *	GFP_USER     - only nodes in current tasks mems allowed ok.
+ *
+ * Rule:
+ *    Don't call cpuset_zone_allowed() if you can't sleep, unless you
+ *    pass in the __GFP_HARDWALL flag set in gfp_flag, which disables
+ *    the code that might scan up ancestor cpusets and sleep.
  **/
 
 int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
@@ -2255,6 +2261,7 @@ int __cpuset_zone_allowed(struct zone *z
 	if (in_interrupt())
 		return 1;
 	node = z->zone_pgdat->node_id;
+	might_sleep_if(!(gfp_mask & __GFP_HARDWALL));
 	if (node_isset(node, current->mems_allowed))
 		return 1;
 	if (gfp_mask & __GFP_HARDWALL)	/* If hardwall request, stop here */
diff --git a/kernel/extable.c b/kernel/extable.c
index 7501b53..7fe2628 100644
--- a/kernel/extable.c
+++ b/kernel/extable.c
@@ -40,7 +40,7 @@ const struct exception_table_entry *sear
 	return e;
 }
 
-static int core_kernel_text(unsigned long addr)
+int core_kernel_text(unsigned long addr)
 {
 	if (addr >= (unsigned long)_stext &&
 	    addr <= (unsigned long)_etext)
diff --git a/kernel/module.c b/kernel/module.c
index d24deb0..bbe0486 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -705,14 +705,14 @@ EXPORT_SYMBOL(__symbol_put);
 
 void symbol_put_addr(void *addr)
 {
-	unsigned long flags;
+	struct module *modaddr;
 
-	spin_lock_irqsave(&modlist_lock, flags);
-	if (!kernel_text_address((unsigned long)addr))
-		BUG();
+	if (core_kernel_text((unsigned long)addr))
+		return;
 
-	module_put(module_text_address((unsigned long)addr));
-	spin_unlock_irqrestore(&modlist_lock, flags);
+	if (!(modaddr = module_text_address((unsigned long)addr)))
+		BUG();
+	module_put(modaddr);
 }
 EXPORT_SYMBOL_GPL(symbol_put_addr);
 
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 6d32ff2..2058f88 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -479,12 +479,31 @@ static int __rcu_pending(struct rcu_ctrl
 	return 0;
 }
 
+/*
+ * Check to see if there is any immediate RCU-related work to be done
+ * by the current CPU, returning 1 if so.  This function is part of the
+ * RCU implementation; it is -not- an exported member of the RCU API.
+ */
 int rcu_pending(int cpu)
 {
 	return __rcu_pending(&rcu_ctrlblk, &per_cpu(rcu_data, cpu)) ||
 		__rcu_pending(&rcu_bh_ctrlblk, &per_cpu(rcu_bh_data, cpu));
 }
 
+/*
+ * Check to see if any future RCU-related work will need to be done
+ * by the current CPU, even if none need be done immediately, returning
+ * 1 if so.  This function is part of the RCU implementation; it is -not-
+ * an exported member of the RCU API.
+ */
+int rcu_needs_cpu(int cpu)
+{
+	struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
+	struct rcu_data *rdp_bh = &per_cpu(rcu_bh_data, cpu);
+
+	return (!!rdp->curlist || !!rdp_bh->curlist || rcu_pending(cpu));
+}
+
 void rcu_check_callbacks(int cpu, int user)
 {
 	if (user || 
diff --git a/kernel/sched.c b/kernel/sched.c
index 4c64f85..c13f1bd 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -665,55 +665,13 @@ static int effective_prio(task_t *p)
 }
 
 /*
- * We place interactive tasks back into the active array, if possible.
- *
- * To guarantee that this does not starve expired tasks we ignore the
- * interactivity of a task if the first expired task had to wait more
- * than a 'reasonable' amount of time. This deadline timeout is
- * load-dependent, as the frequency of array switched decreases with
- * increasing number of running tasks. We also ignore the interactivity
- * if a better static_prio task has expired, and switch periodically
- * regardless, to ensure that highly interactive tasks do not starve
- * the less fortunate for unreasonably long periods.
- */
-static inline int expired_starving(runqueue_t *rq)
-{
-	int limit;
-
-	/*
-	 * Arrays were recently switched, all is well
-	 */
-	if (!rq->expired_timestamp)
-		return 0;
-
-	limit = STARVATION_LIMIT * rq->nr_running;
-
-	/*
-	 * It's time to switch arrays
-	 */
-	if (jiffies - rq->expired_timestamp >= limit)
-		return 1;
-
-	/*
-	 * There's a better selection in the expired array
-	 */
-	if (rq->curr->static_prio > rq->best_expired_prio)
-		return 1;
-
-	/*
-	 * All is well
-	 */
-	return 0;
-}
-
-/*
  * __activate_task - move a task to the runqueue.
  */
 static void __activate_task(task_t *p, runqueue_t *rq)
 {
 	prio_array_t *target = rq->active;
 
-	if (unlikely(batch_task(p) || (expired_starving(rq) && !rt_task(p))))
+	if (batch_task(p))
 		target = rq->expired;
 	enqueue_task(p, target);
 	rq->nr_running++;
@@ -2532,6 +2490,22 @@ unsigned long long current_sched_time(co
 }
 
 /*
+ * We place interactive tasks back into the active array, if possible.
+ *
+ * To guarantee that this does not starve expired tasks we ignore the
+ * interactivity of a task if the first expired task had to wait more
+ * than a 'reasonable' amount of time. This deadline timeout is
+ * load-dependent, as the frequency of array switched decreases with
+ * increasing number of running tasks. We also ignore the interactivity
+ * if a better static_prio task has expired:
+ */
+#define EXPIRED_STARVING(rq) \
+	((STARVATION_LIMIT && ((rq)->expired_timestamp && \
+		(jiffies - (rq)->expired_timestamp >= \
+			STARVATION_LIMIT * ((rq)->nr_running) + 1))) || \
+			((rq)->curr->static_prio > (rq)->best_expired_prio))
+
+/*
  * Account user cpu time to a process.
  * @p: the process that the cpu time gets accounted to
  * @hardirq_offset: the offset to subtract from hardirq_count()
@@ -2666,7 +2640,7 @@ void scheduler_tick(void)
 
 		if (!rq->expired_timestamp)
 			rq->expired_timestamp = jiffies;
-		if (!TASK_INTERACTIVE(p) || expired_starving(rq)) {
+		if (!TASK_INTERACTIVE(p) || EXPIRED_STARVING(rq)) {
 			enqueue_task(p, rq->expired);
 			if (p->static_prio < rq->best_expired_prio)
 				rq->best_expired_prio = p->static_prio;
diff --git a/kernel/timer.c b/kernel/timer.c
index 67eaf0f..9e49dee 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -541,6 +541,22 @@ found:
 	}
 	spin_unlock(&base->lock);
 
+	/*
+	 * It can happen that other CPUs service timer IRQs and increment
+	 * jiffies, but we have not yet got a local timer tick to process
+	 * the timer wheels.  In that case, the expiry time can be before
+	 * jiffies, but since the high-resolution timer here is relative to
+	 * jiffies, the default expression when high-resolution timers are
+	 * not active,
+	 *
+	 *   time_before(MAX_JIFFY_OFFSET + jiffies, expires)
+	 *
+	 * would falsely evaluate to true.  If that is the case, just
+	 * return jiffies so that we can immediately fire the local timer
+	 */
+	if (time_before(expires, jiffies))
+		return jiffies;
+
 	if (time_before(hr_expires, expires))
 		return hr_expires;
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 6ecc180..ccb0c1f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -189,7 +189,7 @@ config FRAME_POINTER
 config UNWIND_INFO
 	bool "Compile the kernel with frame unwind information"
 	depends on !IA64
-	depends on !MODULES || !(MIPS || PARISC || PPC || SUPERH || SPARC64 || V850)
+	depends on !MODULES || !(MIPS || PARISC || PPC || SUPERH || V850)
 	help
 	  If you say Y here the resulting kernel image will be slightly larger
 	  but not slower, and it will give very useful debugging information.
diff --git a/lib/kobject.c b/lib/kobject.c
index b46350c..687ab41 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -198,14 +198,14 @@ int kobject_add(struct kobject * kobj)
 
 		/* be noisy on error issues */
 		if (error == -EEXIST)
-			printk("kobject_add failed for %s with -EEXIST, "
+			pr_debug("kobject_add failed for %s with -EEXIST, "
 			       "don't try to register things with the "
 			       "same name in the same directory.\n",
 			       kobject_name(kobj));
 		else
-			printk("kobject_add failed for %s (%d)\n",
+			pr_debug("kobject_add failed for %s (%d)\n",
 			       kobject_name(kobj), error);
-		dump_stack();
+		/* dump_stack(); */
 	}
 
 	return error;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index ea77c99..253a450 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -39,6 +39,7 @@ #include <linux/vmalloc.h>
 #include <linux/mempolicy.h>
 
 #include <asm/tlbflush.h>
+#include <asm/div64.h>
 #include "internal.h"
 
 /*
@@ -950,7 +951,7 @@ restart:
 		goto got_pg;
 
 	do {
-		if (cpuset_zone_allowed(*z, gfp_mask))
+		if (cpuset_zone_allowed(*z, gfp_mask|__GFP_HARDWALL))
 			wakeup_kswapd(*z, order);
 	} while (*(++z));
 
@@ -969,7 +970,8 @@ restart:
 		alloc_flags |= ALLOC_HARDER;
 	if (gfp_mask & __GFP_HIGH)
 		alloc_flags |= ALLOC_HIGH;
-	alloc_flags |= ALLOC_CPUSET;
+	if (wait)
+		alloc_flags |= ALLOC_CPUSET;
 
 	/*
 	 * Go through the zonelist again. Let __GFP_HIGH and allocations
@@ -2123,14 +2125,22 @@ static void __init alloc_node_mem_map(st
 #ifdef CONFIG_FLAT_NODE_MEM_MAP
 	/* ia64 gets its own node_mem_map, before this, without bootmem */
 	if (!pgdat->node_mem_map) {
-		unsigned long size;
+		unsigned long size, start, end;
 		struct page *map;
 
-		size = (pgdat->node_spanned_pages + 1) * sizeof(struct page);
+		/*
+		 * The zone's endpoints aren't required to be MAX_ORDER
+		 * aligned but the node_mem_map endpoints must be in order
+		 * for the buddy allocator to function correctly.
+		 */
+		start = pgdat->node_start_pfn & ~(MAX_ORDER_NR_PAGES - 1);
+		end = pgdat->node_start_pfn + pgdat->node_spanned_pages;
+		end = ALIGN(end, MAX_ORDER_NR_PAGES);
+		size =  (end - start) * sizeof(struct page);
 		map = alloc_remap(pgdat->node_id, size);
 		if (!map)
 			map = alloc_bootmem_node(pgdat, size);
-		pgdat->node_mem_map = map;
+		pgdat->node_mem_map = map + (pgdat->node_start_pfn - start);
 	}
 #ifdef CONFIG_FLATMEM
 	/*
@@ -2566,9 +2576,11 @@ void setup_per_zone_pages_min(void)
 	}
 
 	for_each_zone(zone) {
-		unsigned long tmp;
+		u64 tmp;
+
 		spin_lock_irqsave(&zone->lru_lock, flags);
-		tmp = (pages_min * zone->present_pages) / lowmem_pages;
+		tmp = (u64)pages_min * zone->present_pages;
+		do_div(tmp, lowmem_pages);
 		if (is_highmem(zone)) {
 			/*
 			 * __GFP_HIGH and PF_MEMALLOC allocations usually don't
@@ -2595,8 +2607,8 @@ void setup_per_zone_pages_min(void)
 			zone->pages_min = tmp;
 		}
 
-		zone->pages_low   = zone->pages_min + tmp / 4;
-		zone->pages_high  = zone->pages_min + tmp / 2;
+		zone->pages_low   = zone->pages_min + (tmp >> 2);
+		zone->pages_high  = zone->pages_min + (tmp >> 1);
 		spin_unlock_irqrestore(&zone->lru_lock, flags);
 	}
 
diff --git a/mm/slab.c b/mm/slab.c
index c32af7e..d31a06b 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -700,6 +700,14 @@ static enum {
 	FULL
 } g_cpucache_up;
 
+/*
+ * used by boot code to determine if it can use slab based allocator
+ */
+int slab_is_available(void)
+{
+	return g_cpucache_up == FULL;
+}
+
 static DEFINE_PER_CPU(struct work_struct, reap_work);
 
 static void free_block(struct kmem_cache *cachep, void **objpp, int len,
@@ -2192,11 +2200,14 @@ static void drain_cpu_caches(struct kmem
 	check_irq_on();
 	for_each_online_node(node) {
 		l3 = cachep->nodelists[node];
-		if (l3) {
+		if (l3 && l3->alien)
+			drain_alien_cache(cachep, l3->alien);
+	}
+
+	for_each_online_node(node) {
+		l3 = cachep->nodelists[node];
+		if (l3)
 			drain_array(cachep, l3, l3->shared, 1, node);
-			if (l3->alien)
-				drain_alien_cache(cachep, l3->alien);
-		}
 	}
 }
 
diff --git a/mm/sparse.c b/mm/sparse.c
index d7c32de..100040c 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -32,7 +32,7 @@ static struct mem_section *sparse_index_
 	unsigned long array_size = SECTIONS_PER_ROOT *
 				   sizeof(struct mem_section);
 
-	if (system_state == SYSTEM_RUNNING)
+	if (slab_is_available())
 		section = kmalloc_node(array_size, GFP_KERNEL, nid);
 	else
 		section = alloc_bootmem_node(NODE_DATA(nid), array_size);
@@ -87,11 +87,8 @@ int __section_nr(struct mem_section* ms)
 	unsigned long root_nr;
 	struct mem_section* root;
 
-	for (root_nr = 0;
-	     root_nr < NR_MEM_SECTIONS;
-	     root_nr += SECTIONS_PER_ROOT) {
-		root = __nr_to_section(root_nr);
-
+	for (root_nr = 0; root_nr < NR_SECTION_ROOTS; root_nr++) {
+		root = __nr_to_section(root_nr * SECTIONS_PER_ROOT);
 		if (!root)
 			continue;
 
diff --git a/net/802/tr.c b/net/802/tr.c
index afd8385..e9dc803 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -643,6 +643,5 @@ static int __init rif_init(void)
 
 module_init(rif_init);
 
-EXPORT_SYMBOL(tr_source_route);
 EXPORT_SYMBOL(tr_type_trans);
 EXPORT_SYMBOL(alloc_trdev);
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 1a786bf..72d8529 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -963,7 +963,7 @@ #endif
 static int __init atm_clip_init(void)
 {
 	struct proc_dir_entry *p;
-	neigh_table_init(&clip_tbl);
+	neigh_table_init_no_netlink(&clip_tbl);
 
 	clip_tbl_hook = &clip_tbl;
 	register_atm_ioctl(&clip_ioctl_ops);
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 22d806c..12da21a 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -55,7 +55,7 @@ #endif
 
 static void __exit br_deinit(void)
 {
-	llc_sap_close(br_stp_sap);
+	rcu_assign_pointer(br_stp_sap->rcv_func, NULL);
 
 #ifdef CONFIG_BRIDGE_NETFILTER
 	br_netfilter_fini();
@@ -67,6 +67,7 @@ #endif
 
 	synchronize_net();
 
+	llc_sap_put(br_stp_sap);
 	br_fdb_get_hook = NULL;
 	br_fdb_put_hook = NULL;
 
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index d159c92..466ed34 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -168,7 +168,7 @@ static void ebt_log(const struct sk_buff
 
 	if (info->bitmask & EBT_LOG_NFLOG)
 		nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
-		              info->prefix);
+		              "%s", info->prefix);
 	else
 		ebt_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
 		               info->prefix);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 4cf878e..50a8c73 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1326,8 +1326,7 @@ void neigh_parms_destroy(struct neigh_pa
 	kfree(parms);
 }
 
-
-void neigh_table_init(struct neigh_table *tbl)
+void neigh_table_init_no_netlink(struct neigh_table *tbl)
 {
 	unsigned long now = jiffies;
 	unsigned long phsize;
@@ -1383,10 +1382,27 @@ #endif
 
 	tbl->last_flush = now;
 	tbl->last_rand	= now + tbl->parms.reachable_time * 20;
+}
+
+void neigh_table_init(struct neigh_table *tbl)
+{
+	struct neigh_table *tmp;
+
+	neigh_table_init_no_netlink(tbl);
 	write_lock(&neigh_tbl_lock);
+	for (tmp = neigh_tables; tmp; tmp = tmp->next) {
+		if (tmp->family == tbl->family)
+			break;
+	}
 	tbl->next	= neigh_tables;
 	neigh_tables	= tbl;
 	write_unlock(&neigh_tbl_lock);
+
+	if (unlikely(tmp)) {
+		printk(KERN_ERR "NEIGH: Registering multiple tables for "
+		       "family %d\n", tbl->family);
+		dump_stack();
+	}
 }
 
 int neigh_table_clear(struct neigh_table *tbl)
@@ -2657,6 +2673,7 @@ EXPORT_SYMBOL(neigh_rand_reach_time);
 EXPORT_SYMBOL(neigh_resolve_output);
 EXPORT_SYMBOL(neigh_table_clear);
 EXPORT_SYMBOL(neigh_table_init);
+EXPORT_SYMBOL(neigh_table_init_no_netlink);
 EXPORT_SYMBOL(neigh_update);
 EXPORT_SYMBOL(neigh_update_hhs);
 EXPORT_SYMBOL(pneigh_enqueue);
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index cd810f4..95278b2 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -210,7 +210,7 @@ static void ipcomp4_err(struct sk_buff *
 	    skb->h.icmph->code != ICMP_FRAG_NEEDED)
 		return;
 
-	spi = ntohl(ntohs(ipch->cpi));
+	spi = htonl(ntohs(ipch->cpi));
 	x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr,
 	                      spi, IPPROTO_COMP, AF_INET);
 	if (!x)
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index c2d92f9..d0d1919 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -948,7 +948,7 @@ static int do_add_counters(void __user *
 
 	write_lock_bh(&t->lock);
 	private = t->private;
-	if (private->number != paddc->num_counters) {
+	if (private->number != tmp.num_counters) {
 		ret = -EINVAL;
 		goto unlock_up_free;
 	}
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
index 355a53a..26dfeca 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
@@ -528,14 +528,15 @@ int decode_seq(bitstr_t * bs, field_t * 
 
 			/* Decode */
 			if ((err = (Decoders[son->type]) (bs, son, base,
-							  level + 1)) >
-			    H323_ERROR_STOP)
+							  level + 1)) <
+			    H323_ERROR_NONE)
 				return err;
 
 			bs->cur = beg + len;
 			bs->bit = 0;
 		} else if ((err = (Decoders[son->type]) (bs, son, base,
-							 level + 1)))
+							 level + 1)) <
+			   H323_ERROR_NONE)
 			return err;
 	}
 
@@ -554,7 +555,7 @@ int decode_seq(bitstr_t * bs, field_t * 
 
 	/* Decode the extension components */
 	for (opt = 0; opt < bmp2_len; opt++, i++, son++) {
-		if (son->attr & STOP) {
+		if (i < f->ub && son->attr & STOP) {
 			PRINT("%*.s%s\n", (level + 1) * TAB_SIZE, " ",
 			      son->name);
 			return H323_ERROR_STOP;
@@ -584,8 +585,8 @@ int decode_seq(bitstr_t * bs, field_t * 
 		beg = bs->cur;
 
 		if ((err = (Decoders[son->type]) (bs, son, base,
-						  level + 1)) >
-		    H323_ERROR_STOP)
+						  level + 1)) <
+		    H323_ERROR_NONE)
 			return err;
 
 		bs->cur = beg + len;
@@ -660,18 +661,20 @@ int decode_seqof(bitstr_t * bs, field_t 
 							  i <
 							  effective_count ?
 							  base : NULL,
-							  level + 1)) >
-			    H323_ERROR_STOP)
+							  level + 1)) <
+			    H323_ERROR_NONE)
 				return err;
 
 			bs->cur = beg + len;
 			bs->bit = 0;
 		} else
-		    if ((err = (Decoders[son->type]) (bs, son,
-						      i < effective_count ?
-						      base : NULL,
-						      level + 1)))
-			return err;
+			if ((err = (Decoders[son->type]) (bs, son,
+							  i <
+							  effective_count ?
+							  base : NULL,
+							  level + 1)) <
+			    H323_ERROR_NONE)
+				return err;
 
 		if (base)
 			base += son->offset;
@@ -735,13 +738,14 @@ int decode_choice(bitstr_t * bs, field_t
 		}
 		beg = bs->cur;
 
-		if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) >
-		    H323_ERROR_STOP)
+		if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+		    H323_ERROR_NONE)
 			return err;
 
 		bs->cur = beg + len;
 		bs->bit = 0;
-	} else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)))
+	} else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+		   H323_ERROR_NONE)
 		return err;
 
 	return H323_ERROR_NONE;
diff --git a/net/ipv4/netfilter/ip_nat_proto_gre.c b/net/ipv4/netfilter/ip_nat_proto_gre.c
index 6c4899d..96ceaba 100644
--- a/net/ipv4/netfilter/ip_nat_proto_gre.c
+++ b/net/ipv4/netfilter/ip_nat_proto_gre.c
@@ -49,15 +49,15 @@ gre_in_range(const struct ip_conntrack_t
 	     const union ip_conntrack_manip_proto *min,
 	     const union ip_conntrack_manip_proto *max)
 {
-	u_int32_t key;
+	__be16 key;
 
 	if (maniptype == IP_NAT_MANIP_SRC)
 		key = tuple->src.u.gre.key;
 	else
 		key = tuple->dst.u.gre.key;
 
-	return ntohl(key) >= ntohl(min->gre.key)
-		&& ntohl(key) <= ntohl(max->gre.key);
+	return ntohs(key) >= ntohs(min->gre.key)
+		&& ntohs(key) <= ntohs(max->gre.key);
 }
 
 /* generate unique tuple ... */
@@ -81,14 +81,14 @@ gre_unique_tuple(struct ip_conntrack_tup
 		min = 1;
 		range_size = 0xffff;
 	} else {
-		min = ntohl(range->min.gre.key);
-		range_size = ntohl(range->max.gre.key) - min + 1;
+		min = ntohs(range->min.gre.key);
+		range_size = ntohs(range->max.gre.key) - min + 1;
 	}
 
 	DEBUGP("min = %u, range_size = %u\n", min, range_size); 
 
 	for (i = 0; i < range_size; i++, key++) {
-		*keyptr = htonl(min + key % range_size);
+		*keyptr = htons(min + key % range_size);
 		if (!ip_nat_used_tuple(tuple, conntrack))
 			return 1;
 	}
diff --git a/net/ipv4/netfilter/ip_nat_snmp_basic.c b/net/ipv4/netfilter/ip_nat_snmp_basic.c
index c622538..c332442 100644
--- a/net/ipv4/netfilter/ip_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/ip_nat_snmp_basic.c
@@ -768,6 +768,7 @@ static unsigned char snmp_object_decode(
 			len *= sizeof(unsigned long);
 			*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
 			if (*obj == NULL) {
+				kfree(lp);
 				kfree(id);
 				if (net_ratelimit())
 					printk("OOM in bsalg (%d)\n", __LINE__);
@@ -1003,12 +1004,12 @@ static unsigned char snmp_trap_decode(st
 		
 	return 1;
 
+err_addr_free:
+	kfree((unsigned long *)trap->ip_address);
+
 err_id_free:
 	kfree(trap->id);
 
-err_addr_free:
-	kfree((unsigned long *)trap->ip_address);
-	
 	return 0;
 }
 
@@ -1126,11 +1127,10 @@ static int snmp_parse_mangle(unsigned ch
 		struct snmp_v1_trap trap;
 		unsigned char ret = snmp_trap_decode(&ctx, &trap, map, check);
 		
-		/* Discard trap allocations regardless */
-		kfree(trap.id);
-		kfree((unsigned long *)trap.ip_address);
-		
-		if (!ret)
+		if (ret) {
+			kfree(trap.id);
+			kfree((unsigned long *)trap.ip_address);
+		} else 
 			return ret;
 		
 	} else {
diff --git a/net/ipv4/netfilter/ipt_LOG.c b/net/ipv4/netfilter/ipt_LOG.c
index 39fd4c2..b98f7b0 100644
--- a/net/ipv4/netfilter/ipt_LOG.c
+++ b/net/ipv4/netfilter/ipt_LOG.c
@@ -428,7 +428,7 @@ ipt_log_target(struct sk_buff **pskb,
 
 	if (loginfo->logflags & IPT_LOG_NFLOG)
 		nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
-		              loginfo->prefix);
+		              "%s", loginfo->prefix);
 	else
 		ipt_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
 		               loginfo->prefix);
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 1438432..b847ee4 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -821,6 +821,7 @@ #ifdef CONFIG_PROC_FS
 	/* Create our proc 'status' entry. */
 	curr_table->status_proc = create_proc_entry(curr_table->name, ip_list_perms, proc_net_ipt_recent);
 	if (!curr_table->status_proc) {
+		vfree(hold);
 		printk(KERN_INFO RECENT_NAME ": checkentry: unable to allocate for /proc entry.\n");
 		/* Destroy the created table */
 		spin_lock_bh(&recent_lock);
@@ -845,7 +846,6 @@ #endif
 		spin_unlock_bh(&recent_lock);
 		vfree(curr_table->time_info);
 		vfree(curr_table->hash_table);
-		vfree(hold);
 		vfree(curr_table->table);
 		vfree(curr_table);
 		return 0;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 9f0cca4..4a538bc 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1662,6 +1662,8 @@ static void tcp_update_scoreboard(struct
 			if (!(TCP_SKB_CB(skb)->sacked&TCPCB_TAGBITS)) {
 				TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
 				tp->lost_out += tcp_skb_pcount(skb);
+				if (IsReno(tp))
+					tcp_remove_reno_sacks(sk, tp, tcp_skb_pcount(skb) + 1);
 
 				/* clear xmit_retrans hint */
 				if (tp->retransmit_skb_hint &&
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index f285bbf..8604c74 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -221,7 +221,7 @@ _decode_session4(struct sk_buff *skb, st
 			if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
 				u16 *ipcomp_hdr = (u16 *)xprth;
 
-				fl->fl_ipsec_spi = ntohl(ntohs(ipcomp_hdr[1]));
+				fl->fl_ipsec_spi = htonl(ntohs(ipcomp_hdr[1]));
 			}
 			break;
 		default:
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 05eb67d..4863643 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -208,7 +208,7 @@ static void ipcomp6_err(struct sk_buff *
 	if (type != ICMPV6_DEST_UNREACH && type != ICMPV6_PKT_TOOBIG)
 		return;
 
-	spi = ntohl(ntohs(ipcomph->cpi));
+	spi = htonl(ntohs(ipcomph->cpi));
 	x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, IPPROTO_COMP, AF_INET6);
 	if (!x)
 		return;
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 0a67303..2e72f89 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -1103,7 +1103,7 @@ do_add_counters(void __user *user, unsig
 
 	write_lock_bh(&t->lock);
 	private = t->private;
-	if (private->number != paddc->num_counters) {
+	if (private->number != tmp.num_counters) {
 		ret = -EINVAL;
 		goto unlock_up_free;
 	}
diff --git a/net/ipv6/netfilter/ip6t_LOG.c b/net/ipv6/netfilter/ip6t_LOG.c
index a96c0de..73c6300 100644
--- a/net/ipv6/netfilter/ip6t_LOG.c
+++ b/net/ipv6/netfilter/ip6t_LOG.c
@@ -439,7 +439,7 @@ ip6t_log_target(struct sk_buff **pskb,
 
 	if (loginfo->logflags & IP6T_LOG_NFLOG)
 		nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
-		              loginfo->prefix);
+		              "%s", loginfo->prefix);
 	else
 		ip6t_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
 		                loginfo->prefix);
diff --git a/net/ipv6/netfilter/ip6t_eui64.c b/net/ipv6/netfilter/ip6t_eui64.c
index 94dbdb8..4f6b84c 100644
--- a/net/ipv6/netfilter/ip6t_eui64.c
+++ b/net/ipv6/netfilter/ip6t_eui64.c
@@ -40,7 +40,7 @@ match(const struct sk_buff *skb,
 
 	memset(eui64, 0, sizeof(eui64));
 
-	if (eth_hdr(skb)->h_proto == ntohs(ETH_P_IPV6)) {
+	if (eth_hdr(skb)->h_proto == htons(ETH_P_IPV6)) {
 		if (skb->nh.ipv6h->version == 0x6) {
 			memcpy(eui64, eth_hdr(skb)->h_source, 3);
 			memcpy(eui64 + 5, eth_hdr(skb)->h_source + 3, 3);
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 2dbf134..811d998 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -944,9 +944,9 @@ out:
 	return rc;
 }
 
-static int ipx_map_frame_type(unsigned char type)
+static __be16 ipx_map_frame_type(unsigned char type)
 {
-	int rc = 0;
+	__be16 rc = 0;
 
 	switch (type) {
 	case IPX_FRAME_ETHERII:	rc = htons(ETH_P_IPX);		break;
diff --git a/net/ipx/ipx_route.c b/net/ipx/ipx_route.c
index 6777444..a394c6f 100644
--- a/net/ipx/ipx_route.c
+++ b/net/ipx/ipx_route.c
@@ -119,7 +119,7 @@ out:
 	return rc;
 }
 
-static int ipxrtr_delete(long net)
+static int ipxrtr_delete(__u32 net)
 {
 	struct ipx_route *r, *tmp;
 	int rc;
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
index 254f907..2d2e2b1 100644
--- a/net/irda/iriap.c
+++ b/net/irda/iriap.c
@@ -544,7 +544,8 @@ static void iriap_getvaluebyclass_respon
 {
 	struct sk_buff *tx_skb;
 	int n;
-	__u32 tmp_be32, tmp_be16;
+	__u32 tmp_be32;
+	__be16 tmp_be16;
 	__u8 *fp;
 
 	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index c60273c..61cdda4 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -321,7 +321,7 @@ static int
 nfulnl_set_flags(struct nfulnl_instance *inst, u_int16_t flags)
 {
 	spin_lock_bh(&inst->lock);
-	inst->flags = ntohs(flags);
+	inst->flags = flags;
 	spin_unlock_bh(&inst->lock);
 
 	return 0;
@@ -902,7 +902,7 @@ nfulnl_recv_config(struct sock *ctnl, st
 	if (nfula[NFULA_CFG_FLAGS-1]) {
 		u_int16_t flags =
 			*(u_int16_t *)NFA_DATA(nfula[NFULA_CFG_FLAGS-1]);
-		nfulnl_set_flags(inst, ntohl(flags));
+		nfulnl_set_flags(inst, ntohs(flags));
 	}
 
 out_put:
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 31eb837..138ea92 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -193,8 +193,10 @@ static void dev_watchdog(unsigned long a
 		    netif_running(dev) &&
 		    netif_carrier_ok(dev)) {
 			if (netif_queue_stopped(dev) &&
-			    (jiffies - dev->trans_start) > dev->watchdog_timeo) {
-				printk(KERN_INFO "NETDEV WATCHDOG: %s: transmit timed out\n", dev->name);
+			    time_after(jiffies, dev->trans_start + dev->watchdog_timeo)) {
+
+				printk(KERN_INFO "NETDEV WATCHDOG: %s: transmit timed out\n",
+				       dev->name);
 				dev->tx_timeout(dev);
 			}
 			if (!mod_timer(&dev->watchdog_timer, jiffies + dev->watchdog_timeo))
diff --git a/net/sctp/input.c b/net/sctp/input.c
index d117ebc..1662f9c 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -73,6 +73,8 @@ static struct sctp_association *__sctp_l
 					const union sctp_addr *peer,
 					struct sctp_transport **pt);
 
+static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
+
 
 /* Calculate the SCTP checksum of an SCTP packet.  */
 static inline int sctp_rcv_checksum(struct sk_buff *skb)
@@ -186,7 +188,6 @@ int sctp_rcv(struct sk_buff *skb)
 	 */
 	if (sk->sk_bound_dev_if && (sk->sk_bound_dev_if != af->skb_iif(skb)))
 	{
-		sock_put(sk);
 		if (asoc) {
 			sctp_association_put(asoc);
 			asoc = NULL;
@@ -197,7 +198,6 @@ int sctp_rcv(struct sk_buff *skb)
 		sk = sctp_get_ctl_sock();
 		ep = sctp_sk(sk)->ep;
 		sctp_endpoint_hold(ep);
-		sock_hold(sk);
 		rcvr = &ep->base;
 	}
 
@@ -253,25 +253,18 @@ int sctp_rcv(struct sk_buff *skb)
 	 */
 	sctp_bh_lock_sock(sk);
 
-	/* It is possible that the association could have moved to a different
-	 * socket if it is peeled off. If so, update the sk.
-	 */ 
-	if (sk != rcvr->sk) {
-		sctp_bh_lock_sock(rcvr->sk);
-		sctp_bh_unlock_sock(sk);
-		sk = rcvr->sk;
-	}
-
 	if (sock_owned_by_user(sk))
-		sk_add_backlog(sk, skb);
+		sctp_add_backlog(sk, skb);
 	else
-		sctp_backlog_rcv(sk, skb);
+		sctp_inq_push(&chunk->rcvr->inqueue, chunk);
 
-	/* Release the sock and the sock ref we took in the lookup calls.
-	 * The asoc/ep ref will be released in sctp_backlog_rcv.
-	 */
 	sctp_bh_unlock_sock(sk);
-	sock_put(sk);
+
+	/* Release the asoc/ep ref we took in the lookup calls. */
+	if (asoc)
+		sctp_association_put(asoc);
+	else
+		sctp_endpoint_put(ep);
 
 	return 0;
 
@@ -280,8 +273,7 @@ discard_it:
 	return 0;
 
 discard_release:
-	/* Release any structures we may be holding. */
-	sock_put(sk);
+	/* Release the asoc/ep ref we took in the lookup calls. */
 	if (asoc)
 		sctp_association_put(asoc);
 	else
@@ -290,56 +282,87 @@ discard_release:
 	goto discard_it;
 }
 
-/* Handle second half of inbound skb processing.  If the sock was busy,
- * we may have need to delay processing until later when the sock is
- * released (on the backlog).   If not busy, we call this routine
- * directly from the bottom half.
+/* Process the backlog queue of the socket.  Every skb on
+ * the backlog holds a ref on an association or endpoint.
+ * We hold this ref throughout the state machine to make
+ * sure that the structure we need is still around.
  */
 int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb)
 {
 	struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk;
- 	struct sctp_inq *inqueue = NULL;
+ 	struct sctp_inq *inqueue = &chunk->rcvr->inqueue;
  	struct sctp_ep_common *rcvr = NULL;
+	int backloged = 0;
 
  	rcvr = chunk->rcvr;
 
-	BUG_TRAP(rcvr->sk == sk);
-
- 	if (rcvr->dead) {
- 		sctp_chunk_free(chunk);
- 	} else {
- 		inqueue = &chunk->rcvr->inqueue;
- 		sctp_inq_push(inqueue, chunk);
- 	}
-
-	/* Release the asoc/ep ref we took in the lookup calls in sctp_rcv. */ 
- 	if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
- 		sctp_association_put(sctp_assoc(rcvr));
- 	else
- 		sctp_endpoint_put(sctp_ep(rcvr));
-  
+	/* If the rcvr is dead then the association or endpoint
+	 * has been deleted and we can safely drop the chunk
+	 * and refs that we are holding.
+	 */
+	if (rcvr->dead) {
+		sctp_chunk_free(chunk);
+		goto done;
+	}
+
+	if (unlikely(rcvr->sk != sk)) {
+		/* In this case, the association moved from one socket to
+		 * another.  We are currently sitting on the backlog of the
+		 * old socket, so we need to move.
+		 * However, since we are here in the process context we
+		 * need to take make sure that the user doesn't own
+		 * the new socket when we process the packet.
+		 * If the new socket is user-owned, queue the chunk to the
+		 * backlog of the new socket without dropping any refs.
+		 * Otherwise, we can safely push the chunk on the inqueue.
+		 */
+
+		sk = rcvr->sk;
+		sctp_bh_lock_sock(sk);
+
+		if (sock_owned_by_user(sk)) {
+			sk_add_backlog(sk, skb);
+			backloged = 1;
+		} else
+			sctp_inq_push(inqueue, chunk);
+
+		sctp_bh_unlock_sock(sk);
+
+		/* If the chunk was backloged again, don't drop refs */
+		if (backloged)
+			return 0;
+	} else {
+		sctp_inq_push(inqueue, chunk);
+	}
+
+done:
+	/* Release the refs we took in sctp_add_backlog */
+	if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
+		sctp_association_put(sctp_assoc(rcvr));
+	else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
+		sctp_endpoint_put(sctp_ep(rcvr));
+	else
+		BUG();
+
         return 0;
 }
 
-void sctp_backlog_migrate(struct sctp_association *assoc, 
-			  struct sock *oldsk, struct sock *newsk)
+static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb)
 {
-	struct sk_buff *skb;
-	struct sctp_chunk *chunk;
+	struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk;
+	struct sctp_ep_common *rcvr = chunk->rcvr;
 
-	skb = oldsk->sk_backlog.head;
-	oldsk->sk_backlog.head = oldsk->sk_backlog.tail = NULL;
-	while (skb != NULL) {
-		struct sk_buff *next = skb->next;
-
-		chunk = SCTP_INPUT_CB(skb)->chunk;
-		skb->next = NULL;
-		if (&assoc->base == chunk->rcvr)
-			sk_add_backlog(newsk, skb);
-		else
-			sk_add_backlog(oldsk, skb);
-		skb = next;
-	}
+	/* Hold the assoc/ep while hanging on the backlog queue.
+	 * This way, we know structures we need will not disappear from us
+	 */
+	if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
+		sctp_association_hold(sctp_assoc(rcvr));
+	else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
+		sctp_endpoint_hold(sctp_ep(rcvr));
+	else
+		BUG();
+
+	sk_add_backlog(sk, skb);
 }
 
 /* Handle icmp frag needed error. */
@@ -412,7 +435,7 @@ struct sock *sctp_err_lookup(int family,
 	union sctp_addr daddr;
 	struct sctp_af *af;
 	struct sock *sk = NULL;
-	struct sctp_association *asoc = NULL;
+	struct sctp_association *asoc;
 	struct sctp_transport *transport = NULL;
 
 	*app = NULL; *tpp = NULL;
@@ -453,7 +476,6 @@ struct sock *sctp_err_lookup(int family,
 	return sk;
 
 out:
-	sock_put(sk);
 	if (asoc)
 		sctp_association_put(asoc);
 	return NULL;
@@ -463,7 +485,6 @@ out:
 void sctp_err_finish(struct sock *sk, struct sctp_association *asoc)
 {
 	sctp_bh_unlock_sock(sk);
-	sock_put(sk);
 	if (asoc)
 		sctp_association_put(asoc);
 }
@@ -490,7 +511,7 @@ void sctp_v4_err(struct sk_buff *skb, __
 	int type = skb->h.icmph->type;
 	int code = skb->h.icmph->code;
 	struct sock *sk;
-	struct sctp_association *asoc;
+	struct sctp_association *asoc = NULL;
 	struct sctp_transport *transport;
 	struct inet_sock *inet;
 	char *saveip, *savesctp;
@@ -716,7 +737,6 @@ static struct sctp_endpoint *__sctp_rcv_
 
 hit:
 	sctp_endpoint_hold(ep);
-	sock_hold(epb->sk);
 	read_unlock(&head->lock);
 	return ep;
 }
@@ -818,7 +838,6 @@ static struct sctp_association *__sctp_l
 hit:
 	*pt = transport;
 	sctp_association_hold(asoc);
-	sock_hold(epb->sk);
 	read_unlock(&head->lock);
 	return asoc;
 }
@@ -846,7 +865,6 @@ int sctp_has_association(const union sct
 	struct sctp_transport *transport;
 
 	if ((asoc = sctp_lookup_association(laddr, paddr, &transport))) {
-		sock_put(asoc->base.sk);
 		sctp_association_put(asoc);
 		return 1;
 	}
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 8d1dc24..c5beb2a 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -498,10 +498,6 @@ static void sctp_cmd_assoc_failed(sctp_c
 	sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
 			SCTP_STATE(SCTP_STATE_CLOSED));
 
-	/* Set sk_err to ECONNRESET on a 1-1 style socket. */
-	if (!sctp_style(asoc->base.sk, UDP))
-		asoc->base.sk->sk_err = ECONNRESET; 
-
 	/* SEND_FAILED sent later when cleaning up the association. */
 	asoc->outqueue.error = error;
 	sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
@@ -838,6 +834,15 @@ static void sctp_cmd_del_non_primary(str
 	return;
 }
 
+/* Helper function to set sk_err on a 1-1 style socket. */
+static void sctp_cmd_set_sk_err(struct sctp_association *asoc, int error)
+{
+	struct sock *sk = asoc->base.sk;
+
+	if (!sctp_style(sk, UDP))
+		sk->sk_err = error;
+}
+
 /* These three macros allow us to pull the debugging code out of the
  * main flow of sctp_do_sm() to keep attention focused on the real
  * functionality there.
@@ -1458,6 +1463,9 @@ static int sctp_cmd_interpreter(sctp_eve
 			local_cork = 0;
 			asoc->peer.retran_path = t;
 			break;
+		case SCTP_CMD_SET_SK_ERR:
+			sctp_cmd_set_sk_err(asoc, cmd->obj.error);
+			break;
 		default:
 			printk(KERN_WARNING "Impossible command: %u, %p\n",
 			       cmd->verb, cmd->obj.ptr);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 8cdba51..8bc2792 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -93,7 +93,7 @@ static sctp_disposition_t sctp_sf_shut_8
 static struct sctp_sackhdr *sctp_sm_pull_sack(struct sctp_chunk *chunk);
 
 static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands,
-					   __u16 error,
+					   __u16 error, int sk_err,
 					   const struct sctp_association *asoc,
 					   struct sctp_transport *transport);
 
@@ -448,7 +448,7 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(c
 	__u32 init_tag;
 	struct sctp_chunk *err_chunk;
 	struct sctp_packet *packet;
-	sctp_disposition_t ret;
+	__u16 error;
 
 	if (!sctp_vtag_verify(chunk, asoc))
 		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -480,11 +480,9 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(c
 			goto nomem;
 
 		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(reply));
-		sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-				SCTP_STATE(SCTP_STATE_CLOSED));
-		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
-		sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
-		return SCTP_DISPOSITION_DELETE_TCB;
+		return sctp_stop_t1_and_abort(commands, SCTP_ERROR_INV_PARAM,
+					      ECONNREFUSED, asoc,
+					      chunk->transport);
 	}
 
 	/* Verify the INIT chunk before processing it. */
@@ -511,27 +509,16 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(c
 				sctp_add_cmd_sf(commands, SCTP_CMD_SEND_PKT,
 						SCTP_PACKET(packet));
 				SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS);
-				sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-						SCTP_STATE(SCTP_STATE_CLOSED));
-				sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
-						SCTP_NULL());
-				return SCTP_DISPOSITION_CONSUME;
+				error = SCTP_ERROR_INV_PARAM;
 			} else {
-				sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-						SCTP_STATE(SCTP_STATE_CLOSED));
-				sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
-						SCTP_NULL());
-				return SCTP_DISPOSITION_NOMEM;
+				error = SCTP_ERROR_NO_RESOURCE;
 			}
 		} else {
-			ret = sctp_sf_tabort_8_4_8(ep, asoc, type, arg,
-						   commands);
-			sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-					SCTP_STATE(SCTP_STATE_CLOSED));
-			sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
-					SCTP_NULL());
-			return ret;
+			sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands);
+			error = SCTP_ERROR_INV_PARAM;
 		}
+		return sctp_stop_t1_and_abort(commands, error, ECONNREFUSED,
+						asoc, chunk->transport);
 	}
 
 	/* Tag the variable length parameters.  Note that we never
@@ -886,6 +873,8 @@ sctp_disposition_t sctp_sf_sendbeat_8_3(
 	struct sctp_transport *transport = (struct sctp_transport *) arg;
 
 	if (asoc->overall_error_count >= asoc->max_retrans) {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -1030,6 +1019,12 @@ sctp_disposition_t sctp_sf_backbeat_8_3(
 						  commands);
 
 	hbinfo = (sctp_sender_hb_info_t *) chunk->skb->data;
+	/* Make sure that the length of the parameter is what we expect */
+	if (ntohs(hbinfo->param_hdr.length) !=
+				    sizeof(sctp_sender_hb_info_t)) {
+		return SCTP_DISPOSITION_DISCARD;
+	}
+
 	from_addr = hbinfo->daddr;
 	link = sctp_assoc_lookup_paddr(asoc, &from_addr);
 
@@ -2126,6 +2121,8 @@ static sctp_disposition_t sctp_sf_do_5_2
 	int attempts = asoc->init_err_counter + 1;
 
 	if (attempts > asoc->max_init_attempts) {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 				SCTP_U32(SCTP_ERROR_STALE_COOKIE));
 		return SCTP_DISPOSITION_DELETE_TCB;
@@ -2262,6 +2259,7 @@ sctp_disposition_t sctp_sf_do_9_1_abort(
 	if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr))
 		error = ((sctp_errhdr_t *)chunk->skb->data)->cause;
 
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(ECONNRESET));
  	/* ASSOC_FAILED will DELETE_TCB. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, SCTP_U32(error));
 	SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -2306,7 +2304,8 @@ sctp_disposition_t sctp_sf_cookie_wait_a
 	if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr))
 		error = ((sctp_errhdr_t *)chunk->skb->data)->cause;
 
-	return sctp_stop_t1_and_abort(commands, error, asoc, chunk->transport);
+	return sctp_stop_t1_and_abort(commands, error, ECONNREFUSED, asoc,
+				      chunk->transport);
 }
 
 /*
@@ -2318,7 +2317,8 @@ sctp_disposition_t sctp_sf_cookie_wait_i
 					void *arg,
 					sctp_cmd_seq_t *commands)
 {
-	return sctp_stop_t1_and_abort(commands, SCTP_ERROR_NO_ERROR, asoc,
+	return sctp_stop_t1_and_abort(commands, SCTP_ERROR_NO_ERROR,
+				      ENOPROTOOPT, asoc,
 				      (struct sctp_transport *)arg);
 }
 
@@ -2343,7 +2343,7 @@ sctp_disposition_t sctp_sf_cookie_echoed
  * This is common code called by several sctp_sf_*_abort() functions above.
  */
 static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands,
-					   __u16 error,
+					   __u16 error, int sk_err,
 					   const struct sctp_association *asoc,
 					   struct sctp_transport *transport)
 {
@@ -2353,6 +2353,7 @@ static sctp_disposition_t sctp_stop_t1_a
 	SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
 	sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
 			SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT));
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(sk_err));
 	/* CMD_INIT_FAILED will DELETE_TCB. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 			SCTP_U32(error));
@@ -3336,6 +3337,8 @@ sctp_disposition_t sctp_sf_do_asconf_ack
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
 				SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
 		sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			        SCTP_ERROR(ECONNABORTED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_ASCONF_ACK));
 		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -3362,6 +3365,8 @@ sctp_disposition_t sctp_sf_do_asconf_ack
 		 * processing the rest of the chunks in the packet.
 		 */
 		sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			        SCTP_ERROR(ECONNABORTED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_ASCONF_ACK));
 		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -3714,9 +3719,13 @@ static sctp_disposition_t sctp_sf_violat
 	if (asoc->state <= SCTP_STATE_COOKIE_ECHOED) {
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
 				SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT));
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ECONNREFUSED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 				SCTP_U32(SCTP_ERROR_PROTO_VIOLATION));
 	} else {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			        SCTP_ERROR(ECONNABORTED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_PROTO_VIOLATION));
 		SCTP_DEC_STATS(SCTP_MIB_CURRESTAB);
@@ -4034,6 +4043,8 @@ sctp_disposition_t sctp_sf_do_9_1_prm_ab
 	 * TCB.  This is a departure from our typical NOMEM handling.
 	 */
 
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			SCTP_ERROR(ECONNABORTED));
 	/* Delete the established association. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 			SCTP_U32(SCTP_ERROR_USER_ABORT));
@@ -4175,6 +4186,8 @@ sctp_disposition_t sctp_sf_cookie_wait_p
 	 * TCB.  This is a departure from our typical NOMEM handling.
 	 */
 
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			SCTP_ERROR(ECONNREFUSED));
 	/* Delete the established association. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 			SCTP_U32(SCTP_ERROR_USER_ABORT));
@@ -4543,6 +4556,8 @@ sctp_disposition_t sctp_sf_do_6_3_3_rtx(
 	struct sctp_transport *transport = arg;
 
 	if (asoc->overall_error_count >= asoc->max_retrans) {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -4662,6 +4677,8 @@ sctp_disposition_t sctp_sf_t1_init_timer
 		SCTP_DEBUG_PRINTK("Giving up on INIT, attempts: %d"
 				  " max_init_attempts: %d\n",
 				  attempts, asoc->max_init_attempts);
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
 		return SCTP_DISPOSITION_DELETE_TCB;
@@ -4711,6 +4728,8 @@ sctp_disposition_t sctp_sf_t1_cookie_tim
 
 		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
 	} else {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
 		return SCTP_DISPOSITION_DELETE_TCB;
@@ -4742,6 +4761,8 @@ sctp_disposition_t sctp_sf_t2_timer_expi
 
 	SCTP_DEBUG_PRINTK("Timer T2 expired.\n");
 	if (asoc->overall_error_count >= asoc->max_retrans) {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		/* Note:  CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -4817,6 +4838,8 @@ sctp_disposition_t sctp_sf_t4_timer_expi
 	if (asoc->overall_error_count >= asoc->max_retrans) {
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
 				SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
 		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -4870,6 +4893,8 @@ sctp_disposition_t sctp_sf_t5_timer_expi
 		goto nomem;
 
 	sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(reply));
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			SCTP_ERROR(ETIMEDOUT));
 	sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 			SCTP_U32(SCTP_ERROR_NO_ERROR));
 
@@ -5309,6 +5334,8 @@ static int sctp_eat_data(const struct sc
 		 * processing the rest of the chunks in the packet.
 		 */
 		sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ECONNABORTED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_DATA));
 		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index b6e4b89..174d4d3 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1057,6 +1057,7 @@ static int __sctp_connect(struct sock* s
 	inet_sk(sk)->dport = htons(asoc->peer.port);
 	af = sctp_get_af_specific(to.sa.sa_family);
 	af->to_sk_daddr(&to, sk);
+	sk->sk_err = 0;
 
 	timeo = sock_sndtimeo(sk, sk->sk_socket->file->f_flags & O_NONBLOCK);
 	err = sctp_wait_for_connect(asoc, &timeo);
@@ -1228,7 +1229,7 @@ SCTP_STATIC void sctp_close(struct sock 
 
 	ep = sctp_sk(sk)->ep;
 
-	/* Walk all associations on a socket, not on an endpoint.  */
+	/* Walk all associations on an endpoint.  */
 	list_for_each_safe(pos, temp, &ep->asocs) {
 		asoc = list_entry(pos, struct sctp_association, asocs);
 
@@ -1241,13 +1242,13 @@ SCTP_STATIC void sctp_close(struct sock 
 			if (sctp_state(asoc, CLOSED)) {
 				sctp_unhash_established(asoc);
 				sctp_association_free(asoc);
+				continue;
+			}
+		}
 
-			} else if (sock_flag(sk, SOCK_LINGER) &&
-				   !sk->sk_lingertime)
-				sctp_primitive_ABORT(asoc, NULL);
-			else
-				sctp_primitive_SHUTDOWN(asoc, NULL);
-		} else
+		if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime)
+			sctp_primitive_ABORT(asoc, NULL);
+		else
 			sctp_primitive_SHUTDOWN(asoc, NULL);
 	}
 
@@ -5317,6 +5318,7 @@ static int sctp_wait_for_sndbuf(struct s
 		 */
 		sctp_release_sock(sk);
 		current_timeo = schedule_timeout(current_timeo);
+		BUG_ON(sk != asoc->base.sk);
 		sctp_lock_sock(sk);
 
 		*timeo_p = current_timeo;
@@ -5604,12 +5606,14 @@ static void sctp_sock_migrate(struct soc
 	 */
 	newsp->type = type;
 
-	spin_lock_bh(&oldsk->sk_lock.slock);
-	/* Migrate the backlog from oldsk to newsk. */
-	sctp_backlog_migrate(assoc, oldsk, newsk);
-	/* Migrate the association to the new socket. */
+	/* Mark the new socket "in-use" by the user so that any packets
+	 * that may arrive on the association after we've moved it are
+	 * queued to the backlog.  This prevents a potential race between
+	 * backlog processing on the old socket and new-packet processing
+	 * on the new socket.
+	 */
+	sctp_lock_sock(newsk);
 	sctp_assoc_migrate(assoc, newsk);
-	spin_unlock_bh(&oldsk->sk_lock.slock);
 
 	/* If the association on the newsk is already closed before accept()
 	 * is called, set RCV_SHUTDOWN flag.
@@ -5618,6 +5622,7 @@ static void sctp_sock_migrate(struct soc
 		newsk->sk_shutdown |= RCV_SHUTDOWN;
 
 	newsk->sk_state = SCTP_SS_ESTABLISHED;
+	sctp_release_sock(newsk);
 }
 
 /* This proto struct describes the ULP interface for SCTP.  */
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 3ac4193..7026b08 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -159,6 +159,7 @@ struct cache_head *sunrpc_cache_update(s
 		detail->update(tmp, new);
 	tmp->next = *head;
 	*head = tmp;
+	detail->entries++;
 	cache_get(tmp);
 	is_new = cache_fresh_locked(tmp, new->expiry_time);
 	cache_fresh_locked(old, 0);
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index b549710..891a609 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -62,7 +62,7 @@ int xfrm_parse_spi(struct sk_buff *skb, 
 	case IPPROTO_COMP:
 		if (!pskb_may_pull(skb, sizeof(struct ip_comp_hdr)))
 			return -EINVAL;
-		*spi = ntohl(ntohs(*(u16*)(skb->h.raw + 2)));
+		*spi = htonl(ntohs(*(u16*)(skb->h.raw + 2)));
 		*seq = 0;
 		return 0;
 	default:
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 6d04504..d0f86ed 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -697,29 +697,79 @@ static void check_sec_ref(struct module 
 
 	/* Walk through all sections */
 	for (i = 0; i < hdr->e_shnum; i++) {
-		Elf_Rela *rela;
-		Elf_Rela *start = (void *)hdr + sechdrs[i].sh_offset;
-		Elf_Rela *stop  = (void*)start + sechdrs[i].sh_size;
-		const char *name = secstrings + sechdrs[i].sh_name +
-						strlen(".rela");
+		const char *name = secstrings + sechdrs[i].sh_name;
+		const char *secname;
+		Elf_Rela r;
+		unsigned int r_sym;
 		/* We want to process only relocation sections and not .init */
-		if (section_ref_ok(name) || (sechdrs[i].sh_type != SHT_RELA))
-			continue;
+		if (sechdrs[i].sh_type == SHT_RELA) {
+			Elf_Rela *rela;
+			Elf_Rela *start = (void *)hdr + sechdrs[i].sh_offset;
+			Elf_Rela *stop  = (void*)start + sechdrs[i].sh_size;
+			name += strlen(".rela");
+			if (section_ref_ok(name))
+				continue;
 
-		for (rela = start; rela < stop; rela++) {
-			Elf_Rela r;
-			const char *secname;
-			r.r_offset = TO_NATIVE(rela->r_offset);
-			r.r_info   = TO_NATIVE(rela->r_info);
-			r.r_addend = TO_NATIVE(rela->r_addend);
-			sym = elf->symtab_start + ELF_R_SYM(r.r_info);
-			/* Skip special sections */
-			if (sym->st_shndx >= SHN_LORESERVE)
+			for (rela = start; rela < stop; rela++) {
+				r.r_offset = TO_NATIVE(rela->r_offset);
+#if KERNEL_ELFCLASS == ELFCLASS64
+				if (hdr->e_machine == EM_MIPS) {
+					r_sym = ELF64_MIPS_R_SYM(rela->r_info);
+					r_sym = TO_NATIVE(r_sym);
+				} else {
+					r.r_info = TO_NATIVE(rela->r_info);
+					r_sym = ELF_R_SYM(r.r_info);
+				}
+#else
+				r.r_info = TO_NATIVE(rela->r_info);
+				r_sym = ELF_R_SYM(r.r_info);
+#endif
+				r.r_addend = TO_NATIVE(rela->r_addend);
+				sym = elf->symtab_start + r_sym;
+				/* Skip special sections */
+				if (sym->st_shndx >= SHN_LORESERVE)
+					continue;
+
+				secname = secstrings +
+					sechdrs[sym->st_shndx].sh_name;
+				if (section(secname))
+					warn_sec_mismatch(modname, name,
+							  elf, sym, r);
+			}
+		} else if (sechdrs[i].sh_type == SHT_REL) {
+			Elf_Rel *rel;
+			Elf_Rel *start = (void *)hdr + sechdrs[i].sh_offset;
+			Elf_Rel *stop  = (void*)start + sechdrs[i].sh_size;
+			name += strlen(".rel");
+			if (section_ref_ok(name))
 				continue;
 
-			secname = secstrings + sechdrs[sym->st_shndx].sh_name;
-			if (section(secname))
-				warn_sec_mismatch(modname, name, elf, sym, r);
+			for (rel = start; rel < stop; rel++) {
+				r.r_offset = TO_NATIVE(rel->r_offset);
+#if KERNEL_ELFCLASS == ELFCLASS64
+				if (hdr->e_machine == EM_MIPS) {
+					r_sym = ELF64_MIPS_R_SYM(rel->r_info);
+					r_sym = TO_NATIVE(r_sym);
+				} else {
+					r.r_info = TO_NATIVE(rel->r_info);
+					r_sym = ELF_R_SYM(r.r_info);
+				}
+#else
+				r.r_info = TO_NATIVE(rel->r_info);
+				r_sym = ELF_R_SYM(r.r_info);
+#endif
+				r.r_addend = 0;
+				sym = elf->symtab_start + r_sym;
+				/* Skip special sections */
+				if (sym->st_shndx >= SHN_LORESERVE)
+					continue;
+
+				secname = secstrings +
+					sechdrs[sym->st_shndx].sh_name;
+				if (section(secname))
+					warn_sec_mismatch(modname, name,
+							  elf, sym, r);
+			}
 		}
 	}
 }
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index b14255c..861d866 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -21,6 +21,7 @@ #define Elf_Section Elf32_Section
 #define ELF_ST_BIND ELF32_ST_BIND
 #define ELF_ST_TYPE ELF32_ST_TYPE
 
+#define Elf_Rel     Elf32_Rel
 #define Elf_Rela    Elf32_Rela
 #define ELF_R_SYM   ELF32_R_SYM
 #define ELF_R_TYPE  ELF32_R_TYPE
@@ -34,11 +35,31 @@ #define Elf_Section Elf64_Section
 #define ELF_ST_BIND ELF64_ST_BIND
 #define ELF_ST_TYPE ELF64_ST_TYPE
 
+#define Elf_Rel     Elf64_Rel
 #define Elf_Rela    Elf64_Rela
 #define ELF_R_SYM   ELF64_R_SYM
 #define ELF_R_TYPE  ELF64_R_TYPE
 #endif
 
+/* The 64-bit MIPS ELF ABI uses an unusual reloc format. */
+typedef struct
+{
+	Elf32_Word    r_sym;	/* Symbol index */
+	unsigned char r_ssym;	/* Special symbol for 2nd relocation */
+	unsigned char r_type3;	/* 3rd relocation type */
+	unsigned char r_type2;	/* 2nd relocation type */
+	unsigned char r_type1;	/* 1st relocation type */
+} _Elf64_Mips_R_Info;
+
+typedef union
+{
+	Elf64_Xword		r_info_number;
+	_Elf64_Mips_R_Info	r_info_fields;
+} _Elf64_Mips_R_Info_union;
+
+#define ELF64_MIPS_R_SYM(i) \
+  ((__extension__ (_Elf64_Mips_R_Info_union)(i)).r_info_fields.r_sym)
+
 #if KERNEL_ELFDATA != HOST_ELFDATA
 
 static inline void __endian(const void *src, void *dest, unsigned int size)
@@ -48,8 +69,6 @@ static inline void __endian(const void *
 		((unsigned char*)dest)[i] = ((unsigned char*)src)[size - i-1];
 }
 
-
-
 #define TO_NATIVE(x)						\
 ({								\
 	typeof(x) __x;						\
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index d987048..21dad41 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3231,7 +3231,7 @@ static int selinux_socket_sock_rcv_skb(s
 		goto out;
 
 	/* Handle mapped IPv4 packets arriving via IPv6 sockets */
-	if (family == PF_INET6 && skb->protocol == ntohs(ETH_P_IP))
+	if (family == PF_INET6 && skb->protocol == htons(ETH_P_IP))
 		family = PF_INET;
 
  	read_lock_bh(&sk->sk_callback_lock);
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 7177e98..c284dbb 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -594,6 +594,10 @@ int security_sid_to_context(u32 sid, cha
 
 			*scontext_len = strlen(initial_sid_to_string[sid]) + 1;
 			scontextp = kmalloc(*scontext_len,GFP_ATOMIC);
+			if (!scontextp) {
+				rc = -ENOMEM;
+				goto out;
+			}
 			strcpy(scontextp, initial_sid_to_string[sid]);
 			*scontext = scontextp;
 			goto out;
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index da7ef26..77b0600 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -151,7 +151,7 @@ static struct pnp_device_id snd_mpu401_p
 
 MODULE_DEVICE_TABLE(pnp, snd_mpu401_pnpids);
 
-static int __init snd_mpu401_pnp(int dev, struct pnp_dev *device,
+static int __devinit snd_mpu401_pnp(int dev, struct pnp_dev *device,
 				 const struct pnp_device_id *id)
 {
 	if (!pnp_port_valid(device, 0) ||
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index a36ec1d..e6945db 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -85,6 +85,8 @@ #include <linux/slab.h>
 #include <linux/pnp.h>
 #include <linux/isapnp.h>
 #include <linux/moduleparam.h>
+#include <linux/delay.h>
+
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <sound/core.h>
diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c
index 49796be..e04fa49 100644
--- a/sound/oss/ad1848.c
+++ b/sound/oss/ad1848.c
@@ -2026,7 +2026,8 @@ int ad1848_init (char *name, struct reso
 	if (irq > 0)
 	{
 		devc->dev_no = my_dev;
-		if (request_irq(devc->irq, adintr, 0, devc->name, (void *)my_dev) < 0)
+		if (request_irq(devc->irq, adintr, 0, devc->name,
+				(void *)(long)my_dev) < 0)
 		{
 			printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n");
 			/* Don't free it either then.. */
@@ -2175,7 +2176,7 @@ void ad1848_unload(int io_base, int irq,
 		if (!share_dma)
 		{
 			if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */
-				free_irq(devc->irq, (void *)devc->dev_no);
+				free_irq(devc->irq, (void *)(long)devc->dev_no);
 
 			sound_free_dma(dma_playback);
 
@@ -2204,7 +2205,7 @@ irqreturn_t adintr(int irq, void *dev_id
 	unsigned char c930_stat = 0;
 	int cnt = 0;
 
-	dev = (int)dev_id;
+	dev = (long)dev_id;
 	devc = (ad1848_info *) audio_devs[dev]->devc;
 
 interrupt_again:		/* Jump back here if int status doesn't reset */
@@ -2900,7 +2901,8 @@ static struct pnp_dev *activate_dev(char
 	return(dev);
 }
 
-static struct pnp_dev *ad1848_init_generic(struct pnp_card *bus, struct address_info *hw_config, int slot)
+static struct pnp_dev __init *ad1848_init_generic(struct pnp_card *bus,
+				struct address_info *hw_config, int slot)
 {
 
 	/* Configure Audio device */
diff --git a/sound/oss/nm256_audio.c b/sound/oss/nm256_audio.c
index 7de079b..6e662ac 100644
--- a/sound/oss/nm256_audio.c
+++ b/sound/oss/nm256_audio.c
@@ -960,7 +960,7 @@ static struct ac97_mixer_value_list mixe
 
 
 /* Installs the AC97 mixer into CARD.  */
-static int __init
+static int __devinit
 nm256_install_mixer (struct nm256_info *card)
 {
     int mixer;
@@ -995,7 +995,7 @@ nm256_install_mixer (struct nm256_info *
  * RAM.
  */
 
-static void __init
+static void __devinit
 nm256_peek_for_sig (struct nm256_info *card)
 {
     u32 port1offset 
@@ -1056,7 +1056,7 @@ nm256_install(struct pci_dev *pcidev, en
     card->playing  = 0;
     card->recording = 0;
     card->rev = rev;
-	spin_lock_init(&card->lock);
+    spin_lock_init(&card->lock);
 
     /* Init the memory port info.  */
     for (x = 0; x < 2; x++) {
